15. The Stanford-Binet test was used during World War 1 to identify individuals for officer status.
True
False

Answer:

Current is calculated as the amount of charge that pass  a point on a circuit per time.

Explanation:

Electric current is defined as the amount of charge that passes a point on a circuit per unit time. The mathematical definition of electric current is given by :

[tex]I=\dfrac{q}{t}[/tex]

Where

q is a charge (Coulomb)

t is time (in seconds)

The SI unit of electric current is A. It is equivalent to C/s. So, the correct option is (A).

Answer:

I = 3.81 x 10⁴ A

Explanation:

The magnetic field of a solenoid must be equal to the field of earth:

[tex]Field\ of\ Earth = Field\ of\ Solenoid\\52\ T = \mu n I\\I = \frac{52}{\mu n}[/tex]

where,

I = current passing through solenoid = ?

μ = permeability of free space = 4π x 10⁻⁷ N/A²

n = no. of turns per unit length = [tex]\frac{5000\ turns}{4.6\ m}[/tex] = 1086.96 /m

Therefore,

[tex]I = \frac{52\ T}{(4\pi\ x\ 10^{-7}\ N/A^2)(1086.96\ /m)}[/tex]

I = 3.81 x 10⁴ A

Answer:

I think so because if it starts at a low temperature for that material, it should melt when you bring it up to that temperature.

Answer: Mercury

Explanation: Mercury is kinda like the opposite of regular semi-liquid. For ice to melt you need Fahrenheit to melt ice into water while you need Celsius to melt mercury.

Answer:

 θ₁ = θ₂,    n₁ sin θ₁ = n₂ sin  θ₂

instruments can be built that concentrate light on a small surface

Explanation:

The two laws of optical geometry have been known for quite some time.

The law of reflection states that when a ray of light reaches a surface, the reflected ray comes out at the same angle as the incident ray.

       θ₁ = θ₂

The law of refraction establishes how the direction of a light ray changes when it stops from one transparent medium to another.

           n₁ sin θ₁ = n₂ sin  θ₂

With any of these laws, instruments can be built that concentrate light on a small surface, which allows the weak light from the flares to be concentrated and objects to be measured and seen.

Electromagnetic radiation in its entire spectrum has the same properties, which is why telescopes of visible, infrared, and microwave light. Radio telescope, gamma rays use the same principles of the law of reflection and refraction. The main change between each instrument is the materials and which they are built,

a reflecting telescope must be built with a reflective surface, for example for microwaves metal surfaces are used

For gamma ray telescope it is preferred to constrict refracting telescope, therefore the material must be transparent to gamma rays

The radio telescope uses reflection and the surface is metallic, sometimes to reduce the weight the surface has holes smaller than the length of the donut that you want to measure.

Answer:

a) < 3 , -4 >

b) < 3 , -4 >

Explanation:

a) If you can imagine this, adding vectors is like putting them "tip to tail", where you put the beginning point of vector B to the end point of vector A (or vice versa).  Your new vector (A+B) would be from the "tip" of vector A to the "tail" of vector B.

Mathematically, this is the same as adding the x-components of each vector together as well as the y-components.

Vector A: 3 units along the positive x-axis: < 3 , 0 >

Vector B: 4 units along the negative y-axis: < 0 , -4 >

A+B = < 3 , 0 > + < 0 , -4 > = < (3+0) , (0+(-4)) > = < 3 , -4 >

b) Subtracting is like adding a negative, so you could use the same "tip to tail" visual by adding the negative of vector B instead (which is B in the opposite direction).

Vector A: < 3 , 0 >

Vector B: < 0 , -4 >

Vector -B: < 0 , 4 >

A-B = A+(-B) = < 3 , 0 > + < 0 , 4 > = < (3+0) , (0+4) > = < 3 , 4 >

Answer:

the speed of the textbook just before it hits the floor is 2.4 m/s

Explanation:

  Given the data in the question;

mass of pulley = 1.50 kg

radius of pulley = 0.240 m

mass of text book = 2.0 kg

height from which text book was released = 0.9 m

angular speed of the pulley = 10.0 rad/s

the speed of the textbook just before it hits the floor = ?

the speed of the textbook v = angular speed of the pulley × radius of pulley

we substitute

v = 10.0 rad/s × 0.240 m

v = 2.4 m/s

Therefore, the speed of the textbook just before it hits the floor is 2.4 m/s

Answer:

Option B. 0.016 Hz

Explanation:

From the question given above, the following data were obtained.

Period (T) = 60 s

Frequency (f) =?

Frequency and period are related according to the following equation:

Frequency = 1 / period

f = 1/T

With the above formula, we can obtain the frequency of the ride as follow:

Period (T) = 60 s

Frequency (f) =?

f = 1/T

f = 1/60

f = 0.016 Hz

Thus, the rider's frequency is 0.016 Hz

Answer:

Universe

Explanation:

I took the quiz.

Answer:

e = 0.0898m

v = 2.07m/s

Explanation:

a) According to Hooke's law

F = ke

e is the extension

k is the spring constant

Since F = mg

mg = ke

e = mg/k

Substitute the given value

e = 1.1(9.8)/120

e = 10.78/120

e = 0.0898m

Hence it is stretched by 0.0898m from its unstrained length

2) Total Energy = PE+KE+Elastic potential

Total Energy = mgh +1/2mv²+1/2ke²

Substitute the given value

5.0= 1.1(9.8)(0.2)+1/2(1.1)v²+1/2(120)(0.0898)²

Solve for v

5.0 = 2.156+0.55v²+0.48338

5.0-2.156-0.48338= 0.55v²

2.36 =0.55v²

v² = 2.36/0.55

v² = 4.29

v ,= √4.29

v = 2.07m/s

Hence the required velocity is 9.28m/s

Answer:

1/Re= 1/R1 + 1/R2

Explanation:

Two resistors are connected in parallel. If R1 and R2 represent the resistance in Ohms (Ω) of each resistor, then the total resistance R is given by  [tex]\mathbf{\dfrac{1}{R}=\dfrac{1}{R_1}+\dfrac{1}{R_2}}[/tex]. Thus, the rate of R changes when R₁ = 117 Ω and

R₂ = 112 Ω is 0.25 Ω/min

For a given resistor connected in parallel;

[tex]\mathbf{\dfrac{1}{R}=\dfrac{1}{R_1}+\dfrac{1}{R_2}}[/tex]

Making R from the left-hand side the subject of the formula, then:

[tex]\mathbf{R = \dfrac{R_1R_2}{R_1+R_2}}[/tex]

Given that:

Now, replacing the values in the above previous equation, we have:

[tex]\mathbf{R = \dfrac{13104}{229}}[/tex]

However, the differentiation of R with respect to time t will give us the rate at which R is changing when R1=117Ω and R2=112Ω.

So, by differentiating the given equation of the resistor in parallel with respect to time t;

[tex]\mathbf{\dfrac{1}{R}=\dfrac{1}{R_1}+\dfrac{1}{R_2}}[/tex],   we have:

[tex]\mathbf{\dfrac{1}{R^2}(\dfrac{dR}{dt})=\dfrac{1}{R_1^2}(\dfrac{dR_1}{dt})+\dfrac{1}{R_2^2}(\dfrac{dR_2}{dt})}[/tex]

[tex]\mathbf{(\dfrac{dR}{dt})=R^2 \Bigg[ \dfrac{1}{R_1^2}(\dfrac{dR_1}{dt})+\dfrac{1}{R_2^2}(\dfrac{dR_2}{dt})\Bigg]}[/tex]

[tex]\mathbf{\dfrac{dR}{dt}=(\dfrac{13104}{229})^2 \Bigg[ \dfrac{0.4}{117^2}+\dfrac{0.6}{112^2}\Bigg]}[/tex]

[tex]\mathbf{\dfrac{dR}{dt}=3274.44 \Bigg[ (7.7052 \times 10^{-5} )\Bigg]}[/tex]

[tex]\mathbf{\dfrac{dR}{dt}=0.25\ \Omega /min}[/tex]

Therefore, we can conclude that the rate at which R is changing R1=117Ω and R2=112Ω is 0.25 Ω/min

Learn more about resistors here:

https://brainly.com/question/17390255?referrer=searchResults

Answer:

J = 3.564 N.s

Explanation:

From  the given information:

angle θ = 27°

mass = 0.0200 kg

speed = 33.0 m/s

To determine the impulse applied using the equation:

J = m(2V cos  θ)

J = 0.0200 (2 × cos (27.0))

J = 0.0200 (2 × 0.8910)

J = 0.03564

J = 3.564 N.s

Answer:

i believe its temperate

Explanation:

The climate zone that has hot summers, cold winters, and average amounts of precipitation throughout the year is the temperate climate zone. So, option C is correct.

Climatic zones are defined as the areas that have different climatic conditions over the world.

Here,

The climate zone that hot summers, cold winters and average amounts of precipitation throughout the year is the temperate climate zone.

The temperate climate zones are the areas that have mild temperature condition that are located between the subtropical and the polar regions. These are zones with moderate rainfall that is throughout the year. The temperature in this zone will change greatly between the summer and winter seasons. These zones are hotter during the summer and very cold during the winter.

The temperate zone has an average precipitation of 800 mm.

Hence,

The climate zone that has hot summers, cold winters, and average amounts of precipitation throughout the year is the temperate climate zone.

To learn more about climate zone, click:

https://brainly.com/question/1080277

#SPJ2

Answer:

The correct answer is - 93.24×10^4 kg/m^3.

Explanation:

Given:

height of cylinder: 50.5 mm

diameter = 52.0

then radius will be diameter/2 = 52/2 = 26

Formula:

Density = mass/ volume

Volume = πr^2h

solution:

Now the volume of a cylinder is v = (22/7)×r^2×h

= 22/7×26×26×50.5

= 107261.59 mm^3  

Now volume in cubic meter V =10.7261 ×10^(-5) m^3

So density d = m/V = 1/(10.7261 ×10^(-5))

Or d = 93.24×10^4 kg/m^3

Answer:

r = 1,224 10⁻² m

Explanation:

For this exercise let's use Newton's second law

          F = m a

the force is magnetic

         F = q v x B

The bold letters indicate vectors, the module of this expesion is

          F = q v B

The direction of the force is found by the right hand rule

thumb points in the direction of the velicad + x

fingers extended in the direction of B -z

the palm is in the direction of the force + and

the acceleration of the proton is cenripetal

          a = v² / r

we substitute

          q v B = m v² / r

          r = [tex]\frac{m \ v}{q \ B}[/tex]

let's calculate

         r = [tex]\frac{1.7 \ 10^{-27} \ 5.760063 \ 10^7 }{1.6 \ 10^{-19} \ 0.5 }[/tex]

         r = 1,224 10⁻² m

Answer:

P = 4.5 watts

Explanation:

Given that,

EMF of the circuit, E = 3 volt

The resistance  of the resistors, R = 2 ohms

We need to find the power of this circuit. The relation between power, emf and resistance is given by the formula as follows :

[tex]P=\dfrac{V^2}{R}[/tex]

Substitute all the values,

[tex]P=\dfrac{3^2}{2}\\\\P=4.5\ W[/tex]

So, the power of this circuit is equal to 4.5 watts.

Answer:

tex]2.898\times 10^{-7}\ \text{m}[/tex] ultraviolet region

[tex]2.898\times 10^{-10}\ \text{m}[/tex] x-ray region

Explanation:

T = Temperature

b = Constant of proportionality = [tex]2.898\times 10^{-3}\ \text{m K}[/tex]

[tex]\lambda[/tex] = Wavelength

[tex]T=10^4\ \text{K}[/tex]

From Wein's law we have

[tex]\lambda=\dfrac{b}{T}\\\Rightarrow \lambda=\dfrac{2.898\times 10^{-3}}{10^4}\\\Rightarrow \lambda=2.898\times 10^{-7}\ \text{m}[/tex]

The wavelength of the radiation will be [tex]2.898\times 10^{-7}\ \text{m}[/tex] and it is in the ultraviolet region.

[tex]T=10^7\ \text{K}[/tex]

[tex]\lambda=\dfrac{2.898\times 10^{-3}}{10^7}\\\Rightarrow \lambda=2.898\times 10^{-10}\ \text{m}[/tex]

The wavelength of the radiation will be [tex]2.898\times 10^{-10}\ \text{m}[/tex] and it is in the x-ray region.

Answer:

  a = [tex]\frac{m}{m+ \frac{1}{2} m_p} \ g \ sin \beta[/tex]  ,       t = [tex]\sqrt{ \frac{2d}{a} }[/tex]

Explanation:

To solve this exercise we must use Newton's second law

For the block

let's set a reference system with the x axis parallel to the plane

X axis

         Wₓ - T = m a

Y axis  

         N- W_y = 0

         N = W_y

for pulley

          ∑τ = I α

           T R = (½ m_p R²) α

let's use trigonometry for the weight components

         sin β = Wₓ / W

         cos β = W_y / W

         Wx = W sin β

angular and linear variables are related

          a = α R

          α = a / R

we substitute and group our equations

         W sin β - T = m a

         T R = ½ m_p R² (a / R)

         W sin β - T = m a

                        T = ½ m_p a

we solve the system of equations

         W sin β = (m + ½ m_p) a

          a = [tex]\frac{m}{m+ \frac{1}{2} m_p} \ g \ sin \beta[/tex]

let's find the time to travel the distance (d) through the block

          x = v₀ t + ½ a t²

          d = 0 + ½ a t²

          t = [tex]\sqrt{ \frac{2d}{a} }[/tex]

Answer:

the correct answer is C     +, - , +

Explanation:

The electric field for positive charges is outgoing and for negative charges it is directed towards the charge.

Let's apply this to our case:

On plates A and B the field goes to the right, therefore plate A must be positive

In plates B and C the way it goes to the left, so the field is selected from it, this implies that plate C is positive

therefore plate B must be negative for both cases

when checking the correct answer is C     +, - , +

Explanation:

Pencil is clearly an opaque object because, we cannot see through it. For example, take a pencil in your front. You will observe that, you are not able to see the objects behind it. And that is why you can say that pencil is an opaque object.

Answer:

A pencil is opaque

Explanation:

A pencil is opaque, because light cannot pass through it and shadow is created.

Answer:

option b

Explanation:

........................

Answer:

okay

Explanation:

please I don't know

This question is incomplete, the complete question is;

A rifle fires a 2.10 × 10⁻² kg pellet straight upward, because the pellet rests on a compressed spring that is released when the trigger is pulled. The spring has a negligible mass and is compressed by 9.10 × 10⁻² m from its unstrained length. The pellet rises to a maximum height of 6.10 m above its position on the compressed spring. Ignoring air resistance, determine the spring constant.

Answer:

the spring constant is 303.5 N/m

Explanation:

Given the data in the question;

There is a potential energy associated with the spring;

we know that potential energy = kinetic energy

mgh = [tex]\frac{1}{2}[/tex]kx²

where k is the spring constant and x is the compression

as the pallet is fired, the spring gives kinetic energy which is converted into gravitational potential energy

so

m = 2.10 × 10⁻²

g = 9.81 m/s²

h = 6.10 m

x = 9.10 × 10⁻² m

we substitute

mgh = [tex]\frac{1}{2}[/tex]kx²

2.10 × 10⁻² × 9.81 × 6.10 =  [tex]\frac{1}{2}[/tex] × K × ( 9.10 × 10⁻² )²

1.256661 = 0.0041405 × K

K = 1.256661 / 0.0041405

K = 303.5 N/m

Therefore, the spring constant is 303.5 N/m

Answer:

It is the force that pulls down an object on the air

Answer: a downward pull on any object

Explanation:

Answer:

the property of liquid are

1 they can flow from one place to another if surface is slanted

2 it cannot be compressed