3. Neha travels 4 m towards the north, 3m towards the east, and then 7 m towards south, find the displacement and total distance traveled by her.

The Greenhouse Gas Protocol defines scope 3 emissions from waste as emissions from the disposal and treatment of all waste streams produced as a result of the operations of the institution, including the treatment of both solid waste and wastewater.

Methane emissions from solid waste decomposition in landfills, biological treatment of solid wastes, waste incineration and burning, wastewater treatment and discharge, and other sources are examples of waste emissions.

Although they emanate from sources that the company does not own or control, scope 3 emissions are a byproduct of corporate operations. The extraction and manufacturing of purchased materials and the transfer of purchased fuels are two examples of activities in scope 3.

To know more about scope 3 emissions visit:-

https://brainly.com/question/29546967

#SPJ4

Based on the given diagram that contains four items with a predefined mass, it is stated that the four items which are: sponge, glass, eraser and steel are submerged in water for 30 minutes, when they are all brough out, the item that would likely have an increase in weight is the sponge.

This refers to the term that is used to describe and define the force exerted by gravity on an object. The gravitational force acting on the item is referred to as weight in several common textbooks. Some people refer to weight as a scalar quantity that measures the gravitational force's strength.

Hence, it can be seen that a sponge is a foamy material that absorbs water, unlike the other materials and this is the material that would feature an increase in weight after being submerged in water for 30 minutes.

Read more about weights here:

https://brainly.com/question/2337612
#SPJ1

Answer:

3*3-४3*74-7%**&-*%३;9८32&*7५३३6

Work done by friction and air resistance -780,000 Joules. Since the work done by the combined forces of friction and air resistance is negative, this means that these forces are doing negative work on the car, which means that they are slowing the car down.

The work done on the car by the force propelling it up the mountain road is given by W = Fd, where F is the force and d is the distance over which the force is applied. Since the force is nonconservative, the work it does on the car is not equal to the change in the car's kinetic energy. Instead, the work done by the force propelling the car is equal to the change in the car's potential energy plus the work done by the nonconservative forces of friction and air resistance.

To find the work done by the combined forces of friction and air resistance, we can use the following equation:

Work done by friction and air resistance = change in kinetic energy - change in potential energy

We can find the change in the car's kinetic energy by subtracting its initial kinetic energy (0 Joules, since it starts from rest) from its final kinetic energy. The final kinetic energy of the car is given by

[tex]KE = \frac{1}{2} mv^2[/tex]

where m is the mass of the car and v is its speed. Plugging in the values, we get:

[tex]KE = (1/2)(1.50 * 103 kg)(27.0 m/s)^2 = 2.16 * 105[/tex] joule

The change in the car's potential energy can be found by subtracting its initial potential energy (which is 0 Joules at sea level) from its final potential energy. The final potential energy of the car is given by

PE = mgh,

where m is the mass of the car, g is the acceleration due to gravity, and h is the height of the car above the ground. Plugging in the values, we get:

PE = (1.50 x 103 kg)(9.8 m/s²)(2.00 x 102 m) = 2.94 x 105 Joules

Substituting these values into the equation above, we get:

Work done by friction and air resistance = (2.16 x 105 Joules) - (2.94 x 105 Joules) = -780,000 Joules

Learn more about work done, here https://brainly.com/question/13662169

#SPJ4

Violet electromagnetic radiation- The wavelength is 400 nm. Red electromagnetic radiation- The wavelength is 750 nm. Infrared electromagnetic radiation- The wavelength is 1000 nm.

Although they are made using various techniques and are discovered in various ways, they are not essentially distinct from one another.Electromagnetic radiation includes radio waves, gamma rays, visible light, and all other components of the electromagnetic spectrum.

These include microwaves, X-rays, gamma rays, infrared waves, radio waves, visible rays, and infrared, X-ray, and microwave waves.Gamma rays have the smallest wavelength as well as the shortest frequency of the seven electromagnetic waves, while radio waves have had the longest wavelength as well as the longest frequency.

To know more about wavelengths visit:

https://brainly.com/question/13533093

#SPJ4

Your marital status, health information, shopping patterns, financial transactions, income, account balances, criminal history, and level of education are not included in your credit report. Thus, option C is correct.

Your credit report contains personal information, credit account history, credit queries, and public records. These details will be provided to the credit reporting agencies by your creditors and lenders. A significant portion of information is utilized to determine your Scores, which tell prospective lenders how creditworthy you are.

All credit reports contain essentially the same types of information, even if Experian, Equifax, and TransUnion format and publish your information differently.

Therefore, The amount of money in your checking account.

Learn more about credit report here:

https://brainly.com/question/2989702

#SPJ1

(a) The work done by the shot-putter is 313.6 J.

(b) The force exerted by the shot-putter is 627.2 N.

(c) The power used by the shot putter is 7024.6 Watt.

The work done by the shot-putter is equal to the change in the kinetic energy of the shot-put.

W = ΔK.E

W = ¹/₂m(v² - u²)

where;

W = ¹/₂m(v² - 0)

W = ¹/₂mv²

W = ¹/₂(5)(11.2)²

W = 313.6 J

The force exerted by the shot-putter is calculated as follows;

W = Fd

where;

F = W / d

F = ( 313.6 J ) / (0.5 m)

F = 627.2 N

The power used by the shot putter is calculated as follows;

P = Fv

P = (627.2 N) x (11.2 m/s)

P = 7,024.6 Watt

Learn more about work done here: https://brainly.com/question/25816840

#SPJ1

Explanation:

are A and B really the only options ?

because they are wrong.

on T1 everything hangs : x and y and the additional 4 N.

T1 = 8 + 2 + 4 = 14 N

on T2 only the weight of y and the additional 4 N pull down.

T2 = y + 4 = 2 + 4 = 6 N

A genetic disease is an example, such as sickle cell anemia. The organelles that house our genes are called chromosomes. Chromosome disorders include Down syndrome.

A genetic disorder is a condition that is wholly or partially brought on by a deviation from the typical DNA sequence.

Genetic illnesses result from changes or anomalies in an organism's genome. A gene mutation can affect one or more genes, leading to a genetic disorder. Changes in chromosomal structure or number may also be to blame. Genes are the basic unit of heredity.

To know more about genetic diseases visit:-

https://brainly.com/question/8061328

#SPJ4

Answer:

The problems discussed in the meeting of the Gram Sabha are: (i) Construction and maintenance of village roads and waterways, constructions of culverts on them and planting of trees, maintenance and repair of public wells, tanks and pits

Explanation:

Piping water from the Suru river and making an overhead tank in the villages.

(ii) Deepening the handpumps and cleaning the wells.

(iii) Conserving water and recharging it.

(iv) Name of Om Prakash should be in the BPL list.

Vertical distance from the point of observation on the Earth's surface to the point being measured. Altitude: Vertical distance from mean sea level to the point being measured.

gravitational potential energy = mass * acceleration due to gravity * height

gravitational potential energy = 55 * 9.8 * 370

gravitational potential energy = 539 * 370

gravitational potential energy = 199,430

Hence the total change in the skier's gravitational potential energy is 199,430Joules.

To learn more about vertical distance refer to:

https://brainly.com/question/29324607

#SPJ1

The maximum amount of weight that we can load on a vehicle is known as maximum loading capacity.

The maximum loading capacity of any vehicle can be define as that maximum value of the weight of the body that we can load on the vehicle without damaging any part of the vehicle.

The maximum loading capacity of the vehicle is decided by doing certain experiments and observation by the makers and the manufacturers of the parts of the vehicle.

To avoid accidents and unfortunate events the maximum loading capacity is always higher than the prescribed limit of weight for the vehicle.

To know more about loading capacity, visit,

https://brainly.com/question/14645317

#SPJ4

The maximum height the rocket will reach is 298.584m if its initial velocity is 76.5m/sec and it flies upwards.

We know that at highest point final velocity of the rocket will be 0m/sec.Now,we have initial velocity of rocket,final velocity of rocket,acceleration due to gravity.

We are taking upward direction as positive and downward direction as negative, due to that value of acceleration due to gravity is -9.8m/sec²

So,we can use third equation of motion which is given by

v² - u² =2aS

where v is the final velocity of rocket,

u is initial velocity of rocket

a is acceleration of the rocket

and S is the distance travelled by the rocket

We have v=0m/sec,u=76.6m/sec,a=9.8m/sec²,S=?

So,on putting the values,we get

=>(0)² - (76.5)² = 2 × (-9.8) × S

=>S=(76.5)² / 19.6

=>S=5852.25/19.6

=>S=298.584m

Hence, maximum height attained by rocket  is 298.584m.

To know more about height,visit here:

https://brainly.com/question/25099086

#SPJ4

When an object is moved by a force at a constant speed over a rough, horizontal surface, the work against friction results in an increase in the object's

(1) Momentum (2) (2) Powerful potential (3) Translational Kinetic power (4) internal drive 4. The kinetic energy of a runner weighing 60.0 kg is 1920 joules. How fast is she running? Kinetic Power According to classical physics, kinetic energy (KE) is determined by multiplying the mass of an item by the square of its velocity, or 1/2*m. For instance, the kinetic energy of a mass of 10 kg traveling at a speed of 5 meters per second (v = 5 m/s) is equal to 125 joules, or (1/2 * 10 kg) * 5 m/s 2.

To learn more about kinetic energy please click on below link

https://brainly.com/question/26472013

#SPJ4

Answer: electrostatic force

Explanation:

electrostatic forces pull or push on objects without touching them, which is how when you rub some materials together they can result in something called a 'charge', being moved from point A to point B.

Voltmeters are typically connected in parallel because they have high resistance, while ammeters are typically connected in series to measure current since they have low resistance and the voltage drop would be minimal.

For more information on ammeter kindly visit to

https://brainly.com/question/18404570

#SPJ4

Energy (E) is related to wavelength (λ) and frequency (ν) according to the equation E=hν, where h is Planck’s constant (6.626 × 10-34 J-s).

Wavelength is the distance between two successive peaks or troughs of a wave, such as light, sound, or other forms of energy. It is measured in meters or nanometers and is related to the frequency of the wave, as the frequency is inversely proportional to the wavelength. Wavelength can also be used to describe the physical size of an object, such as a particle or cell.
The equation for calculating wavelength (λ) is λ=c/ν, where c is the speed of light (3.0 × 10⁸ m/s). The equation for calculating frequency (ν) is ν=c/λ. Therefore, the formulas for calculating energy wavelength and frequency are:
Energy (E) = hν
Wavelength (λ) = c/ν
Frequency (ν) = c/λ
To know more about wavelentgh click-
https://brainly.com/question/10750459
#SPJ4

The recommended range for refueling for endurance races is 30 to 60 grams of carbohydrates each hour.

The following are suggestions for refueling while exercising. Use a fat supplement every 30 minutes, and stay away from fluids while working out. During endurance activities, good hydration habits should be followed. eating liquids to make up for fluid lost during exercise and drinking freely for the 24 hours before to an event. Maintaining performance, preventing injury, and maintaining hydrate all depend on replacing lost salt from exercise. To figure out how much salt is lost during training, you don't need a sophisticated lab test. You ought to be able to avoid the dangers of sodium losses if you go by these recommendations and experiment to see what works.

To know more about hydrate click here brainly.com/question/14565083

#SPJ4

The required change in after 5 seconds Mechanical energy is 0.6J.

Gravitational potential energy is the energy that an article has because of its situation in the gravitational field. The most well-known use of gravitational potential energy is for objects close to the outer layer of the Earth, where gravitational speed increase can be accepted consistent at around 9.8 m/s2. Since the no point of the gravitational likely energy anytime can be picked (like picking the no point of the direction framework), the possible energy at level h over that point is equivalent to the work expected to lift Become. Move an item up to that level with no net change in active energy. Since the power expected to lift it is equivalent to its weight, it follows that the gravitational potential energy is equivalent to its weight duplicated by the level lifted.

Mechanical energy = kinetic energy + Potential energy

So, After 5 seconds

Mechanical energy = 0.6 + 0

Mechanical energy =  0.6 J

Thus, change in Mechanical energy is 0.6J.

To know more about gravitational potential energy, visit:

brainly.com/question/15896499

#SPJ4

Accordingly, the response at A in a vertical direction weight is   W(2cosϕsinθ−sinϕcosθ)/2sin(θ−ϕ).

If you hang the wire from the ceiling while placing a weight on the lower end, it will sag. By dividing the length change by the starting length, the strain in the wire may be computed. By dividing the weight suspended from the wire by its cross-sectional area, the tensile tension in the wire is determined. Stress and strain have a defined ratio.

Modulus is a fundamental characteristic of industrial yarn and thread for wire and cable, especially aramid yarns (fiber elasticity). The relationship between strain (the ratio of deformation over initial length along an axis) and stress (force per unit area along that axis) is referred to as modulus.

In conclusion, cross-linking improved elastic modulus, decreased strain to failure, and had negligible effect on collagen fracture stress in the current experimental design.

The questions is incomplete I answered it in general way

The uniform beam has a weight W and length l and is supported by a pin at A and a cable BC. (Figure 1) Determine the horizontal and vertical components of reaction at A. Express your answers in terms of some or all of the variables W, l, phi and theta. Enter your answers separated by a comma.

To know more about weight

https://brainly.com/question/29255653

#SPJ4

Right-left = ma, 5-friction=0 ,friction = 5,Work Net = change of kinetic energy,Fx-fx= change of kinetic energy,12 (2) - 5 (2) = change of kinetic energy,24-10 = change of kinetic energy.

When a baseball is thrown at such an angle and is traveling upward, its kinetic energy will decrease because gravity is working against the ball's motion to slow it down and change it from kinetic energy to potential energy.

Because the author's kinetic energy does not change when it is brought to the table, the total mechanical force remains constant.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ4

Given that gravitational potential energy can become kinetic energy upon impact, you can determine the speed.

Total energy can be preserved in this way.

Kinetic and potential energy are equivalent.

We can calculate the velocity from this.

In this manner, we may observe the potential energy becoming kinetic energy.

A doubling in height will lead to a doubling in gravitational potential energy since an object's gravitational potential energy is directly proportionate to its height above the zero point. The gravitational potential energy will triple with a tripling of height.

To learn more about potential  please click on below link

https://brainly.com/question/4305583

#SPJ4

When the ice skater pulls her arms in close to her body, her angular momentum remains the same because it is a conserved quantity. When the ice skater pulls her arms in, her moment of inertia decreases. When the ice skater pulls her arms in, her angular speed increases. When the ice skater pulls her arms in, her rotational kinetic energy increases.

When the ice skater pulls her arms in close to her body, her angular momentum remains the same because it is a conserved quantity. Angular momentum is defined as the product of the moment of inertia and the angular velocity of an object, and it is conserved as long as there is no external torque acting on the object. In this case, since the ice skater is not being acted upon by an external torque, her angular momentum will not change when she pulls her arms in.

When the ice skater pulls her arms in, her moment of inertia decreases. The moment of inertia of an object is a measure of its resistance to changes in its rotational motion, and it is directly proportional to the mass of the object and the distance of the mass from the axis of rotation. When the ice skater pulls her arms in, she reduces the distance of her mass from the axis of rotation, which decreases her moment of inertia.

When the ice skater pulls her arms in, her angular speed increases. This is because the decrease in her moment of inertia leads to an increase in her angular velocity, according to the equation:

ω = L / I

where ω is the angular velocity, L is the angular momentum, and I is the moment of inertia.

When the ice skater pulls her arms in, her rotational kinetic energy increases. This is because the rotational kinetic energy of an object is directly proportional to its moment of inertia and its angular velocity squared, according to the equation:

Krot = (1/2) * I * ω^2

Therefore, when the ice skater's moment of inertia decreases and her angular velocity increases, her rotational kinetic energy will also increase.

To know more about inertia

https://brainly.com/question/3268780

#SPJ4

a) It will travel 4.082 seconds before the car is alongside the truck

b)The car be moving at a speed of 12.246 m/s relative to the truck when they are side by side

c)The distance travelled by car is 106.64 m

d)The distance travelled by truck is 81.64 m

What is meant by relative motion?

The motion of one body when compared to another which is considered to be fixed is known as relative motion.

Initial velocity of the car ,u₁ = 20.0 m/s

Initial velocity of the truck ,u₂ = 20.0 m/s

Initially the distance between the truck and the car, d = 25 m

acceleration of the car,a₁ =  3.0 m/s²

a)  For the car to reach the truck in a time interval( t ) , the distance travelled by car in that time( s₁ ) should be 25m more than the distance travelled by the truck in the same time interval( s₂ )

⇒ s₁ = 25 + s₂                      

    u₁t+ 1/2a₁t² = 25 + u₂t +0        ( by eqn of motion , s = ut + 1/2at²)

    20t + 1/2 * 3 * t² = 25 + 20t

     1/2 * 3 * t² = 25

     t² = 50/3

   t = √50/3

   t = 4.082 s

Therfore, It will travel 4.082 seconds before the car is alongside the truck

b)   Time taken for them to reach side by side ,t = 4.082 s

     velocity of car at that instance , v₁ =u₁ +  a₁t

                                                          v₁ = 20 + 3 (4.082)

                                                              = 20 + 12.246

   ∴ v₁ =32.246 m/s

    relative velocity to the truck ,v₁₂ = v₁ - u₁  

                                                         = 32.246- 20

                                                         = 12.246 m/s

Therefore the car be moving at a speed of 12.246 m/s relative to the truck when they are side by side?

c)  Distance travelled by car , s₁ = u₁t + 1/2a₁t²

                                                  =  20 (4.082) + 1/2 * 3 * (4.082)²

                                                   = 81.64 + 25

                                                    =106.64 m

Therfore the distance travelled by car is 106.64 m

d) Distance travelled by  the truck , s₂ = u₂t

                                                              = 20(4.082)

                                                             = 81.64 m

Therfore the distance travelled by truck is 81.64 m

To learn more about relative motion below is the given link:

https://brainly.com/question/17228388

#SPJ4

Answer:

The impulse applied to the athlete as she slows down is 28 N*s.

Explanation:

To calculate the impulse applied to the athlete as she slows down, we can use the equation:

impulse = force * time

Since the force applied to the athlete is equal to her mass times her acceleration, we can also express the impulse as:

impulse = mass * (vf - vi) / time

Plugging in the values given in the question, we get:

impulse = 71 kg * (4 m/s - 10 m/s) / time

Solving for impulse, we get:

impulse = 28 N*s

Therefore, the impulse applied to the athlete as she slows down is 28 N*s.

The threshold voltages for NMOS transistors in the 180 nm technology are Vth,r = 0.592 V and Vth,n = 0.068 V.

Leading semiconductor firms, first with TSMC and Fujitsu, then Sony, Toshiba, Intel, AMD, Texas Instruments, and IBM, commercialized the 180 nm process, a MOSFET (CMOS) semiconductor process technology, between 1998 and 2000.

The Threshold voltage at which a sizable current begins to flow from the source to the drain is referred to as the threshold voltage.

A thin inversion layer that separates the insulating from the real body of a transistor is typically used to build a threshold voltage. The region's surface is covered with tiny holes that are positively charged, and when electricity is applied, the particles in these spaces are repelled.

To learn more about threshold voltage from given link

https://brainly.com/question/3157069

#SPJ4

The magnitude of the normal force acting on the vehicle in mars is 2,220 N

The mass of the vehicle = 600 kg

The speed at which the space vehicle travels = 4.8 m/s

The gravitational field strength = 3.7 N/kg

The magnitude of the force acting on the vehicle can be found using the formula,

                  F = mg

where F is the force acting on the vehicle

          m is the mass of the vehicle

          g is the gravitational strength.

Let us substitute the known values in the above equation, we get

               F = 600 x 3.7

                  = 2,220 N

Therefore, the force acting on the vehicle is 2,220 N

Learn more about the gravitational field strength in

https://brainly.com/question/18511078

#SPJ4

The sign of q, or the heat transfer, for the process of compressing the air in a bicycle pump, is positive. This means that heat is being transferred into the system, in this case, the air in the pump.

When a gas is compressed, the molecules collide more frequently and with greater force, which increases the temperature of the gas. This increase in temperature is due to the transfer of heat from the surroundings (in this case, the body of the pump) into the gas.

The sign of q can be determined using the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.

If heat is added to the system, q is positive, and if heat is removed from the system, q is negative. In the case of compressing the air in a bicycle pump, the internal energy of the system (the air in the pump) increases, which means that q is positive.

Learn more about the air at

https://brainly.com/question/17551490?referrer=searchResults

#SPJ4

The question is -

You may have noticed that when you compress the air in a bicycle pump, the body of the pump gets warmer. What is the sign of q for this process?