A 61 kg person is on Mars which has an acceleration due to gravity...

The resistance of the wire as shown is obtained as 106.3 * 10^4 Ohm.

We know that the term resistance has to do with the degree of the opposition that is offered to the flow of current. We should know that the resistivity is the opposite of conductivity. We can see that in this case we have to write down the formula of the resistance as;

R = ρl/A

R = resistance

ρ = Resistivity

l = length

A = Area

Then we have for the mercury;

R = 1 * (106.3 * 10^-2)/( 1 * 10^-6)

R = 106.3 * 10^4 Ohm

The wire would have a resistance of  106.3 * 10^4 Ohm.

Learn more about resistivity:https://brainly.com/question/29427458

#SPJ1

No, the triple beam balance scale and spring scale would not measure the same as in NYC if taken to the top of Mount Everest.

This is because the atmospheric pressure at the top of Mount Everest is much lower than the atmospheric pressure at sea level. As atmospheric pressure changes, the weights of objects change as well. This phenomenon is referred to as barometric pressure.

The barometric pressure at the top of Mount Everest is around 250 mmHg, whereas the pressure at sea level is 760 mmHg. Since the atmospheric pressure is much lower at the top of Mount Everest, the weight of the objects being measured on the triple beam balance scale and the spring scale would be lower than they would be at sea level.

For more questions like Triple beam balance click the link below:

https://brainly.com/question/8739276

#SPJ4

Given that the third sphere is located at  force x = 175 cm

Therefore, route two multiplied by the and divided by twplus one will be closed to route X. Okay, so this is how the X is expressed. This is the party, then. Now, in the party, we must locate what we have.

R = 500 cm, and x = 0.35R.

Therefore, x = 0.35 500 cm and x = 175 cm.

Therefore, the third sphere needs to be positioned 175 cm apart from the first sphere force.

The arrangement below shows the placement of two spheres, A and B. mA = 3m and mB = 8m. 8m is the mass of sphere C. Considering that A and B are separated by 500 cm,

To learn more about force  please click on below link

https://brainly.com/question/13191643

#SPJ4

There are 3 vectors are in {a1,a2,a3}.

Since W is the set of all vectors that can be written as a linear combination, there are infinitely many members in W. k₁, k₂, and k₃ are actual integers in the formula: k₁ * a₁ + k₂* a₂ + k₃ * a₃3 .

The definition of a vector is an entity with both magnitude and direction. The movement of an object between two points is described by a vector. The directed line segment can be used to graphically represent vector math.

(a). A₁, A₂, and A₃ each contain three vectors. b = (4, 1, -4) = -4 * a1 - a2 - 2 * a3. In W, the number of vectors is unlimited.

To know more about vectors

https://brainly.com/question/13103483

#SPJ4

It's indeed safer to push than to pull whenever feasible.If an item must be hauled, keep it close to your body and centered between the shoulders and hips.Bend between the waist and shoulders while attempting to maintain a straight back.Always avoid pulling or pushing things up high.

Keep in mind that the quadriceps (thighs), gluteus (buttocks), and abdominal muscles are your LIFTING MUSCLES.

Put your hands on anything and bend your elbows to push it.Apply steady, sustained pressure by moving your weight from the back leg to the front leg.Figure: Grab the item and bend your elbows to pull it.

To know more about muscle visit:

https://brainly.com/question/9883108

#SPJ4

Answer:

are u a gìrl?????????......

Quantum physics and Newtonian physics are two different frameworks for understanding the behavior of matter and energy at different scales.

Newtonian physics, also known as classical mechanics, is based on the work of Isaac Newton and describes the motion of macroscopic objects, such as cars, planets, and baseballs. It is based on the principles of mass, force, and acceleration, and it is very successful at predicting the behavior of objects moving at speeds that are not too close to the speed of light.

Quantum physics, on the other hand, is a theory that describes the behavior of matter and energy at the atomic and subatomic scale. It is based on the idea that energy, matter, and the fundamental building blocks of the universe, such as electrons and photons, can exhibit both wave-like and particle-like properties. Quantum physics also introduces the concept of probability, which allows for the prediction of the likelihood of certain outcomes but not the exact outcomes themselves.

While Newtonian physics and quantum physics may seem quite different at first glance, they are actually complementary theories that can be used to describe the behavior of matter and energy in different situations. In many cases, the predictions of quantum physics agree with those of Newtonian physics, but there are also situations where quantum physics makes predictions that differ from those of classical mechanics.

Answer:

1 hour 30 minutes

Explanation:

because it is going 4 miles and i did this and i got it right

The position of the image relative to the mirror v = 20cm, position of the image behind the mirror.

Since object is always placed in front of the mirror

Hence, object distance will be negative

Object distance (u) = - 100cm

Focus of a convex mirror is behind the mirror

Hence focal length will be positive

Focal length (f)= + 25cm

Find position of the image

Let the image distance = v

Using formula,

[tex]\frac{1}{v}[/tex] +[tex]\frac{1}{u}[/tex] = [tex]\frac{1}{f}[/tex]

[tex]\frac{1}{v}[/tex] = [tex]\frac{1}{f} - \frac{1}{u}[/tex]

[tex]\frac{1}{v} = \frac{1}{25} - \frac{1}{-100}[/tex]

[tex]\frac{1}{v} = \frac{1}{25} + \frac{1}{100}[/tex]

[tex]\frac{1}{v} = \frac{4 + 1}{100}[/tex]

[tex]\frac{1}{v} = \frac{5}{100}[/tex]

v = [tex]\frac{100}{5}[/tex]

v = 20cm

Since v is positive

Hence, image is 20cm behind the mirror

Nature of image is Virtual and erect.

To learn more about convex mirror

https://brainly.com/question/7512320

#SPJ4

The pressure will be different because of the difference in the masses of horse A and horse B.

Horse A will have greater pressure due to much bigger mass.

In order for a horse to survive and operate, its hooves are necessary. Throughout a horse's lifetime, its hooves expand. Each foot of a horse has a single, solid hoof. The size of this might vary according on the breed, size, and running and jumping prowess of the horse.

Scholars have long disagreed on how animals—whose predecessors were dog-sized creatures with three or four toes—came to have only one hoof. According to a recent research, when horses grew bigger, one big toe was shown to be more resistant to bone stress than several smaller toes.

Thus, horse A will have greater pressure due to much bigger mass.

To know more about pressure refer to:

https://brainly.com/question/28012687

#SPJ1

According to the equation, v = f λ, frequency and wavelength are inversely proportional to each other.

The SI unit of wavelength is meter usually denoted as m. While measuring wavelength the multiples or fractions of a meter is also used.

What is a meter?

To know more about meter, click the link given below:

https://brainly.com/question/634345

#SPJ4

Acceleration towards rear is 11 m/s2.

Mass of dummy = 75 kg,   Force acted towards rear of the car = 825 N. Force acting on a body = Mass of body * Acceleration of body

The rate at which an item changes its velocity is known as acceleration, a vector quantity. If an object's velocity is changing, it is accelerating.

A substance is not accelerating if its velocity is not changing. The information on the right depicts an object that is speeding as it moves northward.

Therefore, Acceleration towards rear is 11 m/s2.

To learn more about acceleration, refer to the link:

https://brainly.com/question/12550364

#SPJ1

When an ant crawls 500 cm north, 300 cm west, 200 cm south, then 300 cm east, the distance traveled will be 1300cm.

Distance = 500 + 300 + 200 + 300

Distance = 1300cm

In a different sense, the path an object takes to traverse a certain distance while maintaining a specific speed from one point to another is known as the distance travelled. As was previously said, the distance formula combines time, speed, and distance.

Speed times time equals distance.

The entire path an object has taken can be used to define the distance of an object. For instance, if an automobile travels 5 km east, then turns to head north for another 8 km, the final distance will be 13 km.

To know more about distance, visit:

https://brainly.com/question/11567236

#SPJ1

In “The Interlopers”, irony is a key element the author Saki uses to convey the theme that when people hold grudges, the outcome of the feud is often tragic and The dramatic irony is that both men wish to meet the other man face to face with no witnesses around—each man has the wish to kill the other.

What is an irony?

Irony in its broadest sense is the juxtaposition of what appears to be on the surface and what is or is expected to be. It is an important rhetorical and literary technique.

Sarcasm can be divided into several types, such as verbal sarcasm, dramatic sarcasm, and circumstantial sarcasm. Verbal, dramatic, and situational sarcasm are often used to emphasize truthful claims. An ironic form of simile used in sarcasm, and some forms of ritote, are deliberate words that convey the opposite of the truth, deny the opposite of the truth, or grossly and clearly disrespect the facts. May be used to emphasize the importance of a person.

Therefore, In The Interlopers, Irony is a key element for author Saki to convey the theme, and when people hold grudges, the consequences of feuds are often tragic, and the dramatic irony is that both men are shunned by the other. It's about seeing someone face it because they want to see it. Face it with no witnesses around - each person has a desire to kill the other person.

To know more about Irony, visit:

https://brainly.com/question/26138104

#SPJ4

The right response is travelling to the Himalayan Mountains to see Uncle Chrissy gravitational.

Objects with mass produce a force called gravity that affects other mass-containing objects. Our planet has a gravitational field, and objects can be affected by that field's force.

The Arctic Ocean's surface has the highest gravitational acceleration, at 9.8337 m/s2, while Mount Nevado Huascarán in Peru has the lowest, at 9.7639 m/s2.

This indicates that the Earth's gravity is 9.789 m/s2 at the equator and 9.832 m/s2 at the poles. In other words, this centripetal force causes you to weigh slightly more at the poles than you do at the equator. The size of an object has an impact on gravity, as does

To learn more about gravitational  please click on below link

https://brainly.com/question/3009841

#SPJ4

In order to reduce the current flowing through the lightbulb, the team wanted to find a way to increase resistance.​ Hence, option (D) is correct.

Ohm's law is one of the most fundamental and significant principles governing electrical circuits.

Under the assumption that all physical parameters and temperatures remain constant, Ohm's law asserts that the voltage across a conductor is directly proportional to the current flowing through it.

Mathematically, V = IR

Hence, The team was trying to figure out a technique to increase resistance at constant voltage supply in order to decrease the current flowing through the lightbulb.

Learn more about Ohm's law here:

https://brainly.com/question/1247379

#SPJ1

The formula y=k x or x y=k represents an inverse variation. In other words, if there is a nonzero constant k such that x y=k or y=k x where x0, y0, y varies inversely as x.

The variation formula is either y = k/x or k = x y.

Replace with the supplied values to determine the value of k.

With the known value for k, rewrite the variation equation as y = k/x.

Find the unidentified by substituting the remaining values.

According to the expressions "y varies inversely as x" and "y is inversely proportionate to x," y decreases as x increases or vice versa. There are two translations for this idea. For some constant k, referred to as the constant of proportionality, y x = k. If the constant is desired, use this translation.

to know more about inverse variation please visit.

https://brainly.com/question/11592410

#SPJ4

λ = v/f. Wavelength, velocity, and frequency are all given in units of meters, seconds, and hertz (Hz).

Wavelength and frequency are related to wave speed via the wave speed equation (Speed = Wavelength x Frequency). This equation can be used to determine wave speed when the wavelength and frequency are known.

The frequency formula in terms of time is provided as follows: f = 1/T, where T is the duration of one cycle in seconds and f is the frequency in hertz. The formula for calculating frequency in terms of wavelength and wave speed is given as f = /, where is the wave speed and is the wavelength of the wave.

To know more about wavelength visit:-

https://brainly.com/question/12924624

#SPJ4

On a horizontal surface, a box is perched. The box glides at a constant speed when you apply a force of 100 N at an angle of 0 below the horizontal. Less than 100 N of frictional force is exerted on the box.

A box is moving steadily at 0.55 m/s down an incline slope. All forces operating on this container must result in a vector that points. None of the alternatives above. A extremely thin rope is used to drop a bucket at a steady descending speed. The rope's tension must match the weight of the bucket. If the box is subjected to a force F with an angle p as illustrated,what is the smallest value of below which, regardless of the, the box will not move; A 55.0-kg box is positioned horizontally. The box and the surface have a static friction coefficient of 0.300. What must be put to the box horizontally in order for it to begin.

To know more about static friction click here brainly.com/question/13000653

#SPJ4

The B in the volume formula V = BH stands for the base, which is the area of the base of the cylinder shape.

A cylinder is a three-dimensional solid shape comprising two parallel circular bases, connected by a curved surface, where the center of the circular bases overlaps each other to create a right cylinder.  The formula V = BH is a formula used to calculate the volume of a cylinder. In this formula, V stands for volumes, H represents the height of the cylinder, and B indicates the area of the base of the cylinder.

You can learn more about volume of a cylinder at

https://brainly.com/question/23935577

#SPJ4

An ultraviolet type of photon is released whenever an electron inside a hydrogen atom transitions from the n-2 to the n-1 energy level.

An electron is a negatively charged neutron star that can be either free or bonded to an atom (not bound). An atom has three basic types of particles: protons, neutrons, and the electron that is connected to them.

The electrons are an atom's negatively charged building blocks. A negatively charged atom is created when all of an atom's electrons come together to balance off the positive charge that protons have inside the atomic nucleus. Electrons are the most abundant element in the universe.

To know more about photon

https://brainly.com/question/27984522

#SPJ4

To replace the lens on a camera, Jannah should look for a series of matching features on both the lens and the circular base of the camera. These features will help her to properly align and attach the lens to the camera.

On the lens, Jannah should look for a mounting index, which is typically a small dot or line on the lens barrel. This mounting index helps to align the lens with the mount on the camera.

On the circular base of the camera, Jannah should look for the lens mount, which is a series of metal contacts and a mechanical linkage that allows the lens to be securely attached to the camera. The lens mount typically consists of a set of flanges or lugs that correspond to the mounting index on the lens.

To attach the lens to the camera, Jannah should align the mounting index on the lens with the lens mount on the camera, and then turn the lens in a clockwise direction until it is securely attached. Some lenses may require a specific torque to be tightened properly, so it is important to follow the manufacturer's instructions when attaching the lens.

Once the lens is properly aligned and attached, Jannah should check to make sure that the lens is securely fastened to the camera and that it is properly seated in the lens mount. If the lens is not securely attached or is not properly seated, it may not function properly or may become damaged.

To know more about lens

https://brainly.com/question/766997

#SPJ4

The formula for gravitational force between two objects is given as the product of gravitational constant and masses of the two objects, divided by the square of distance between the two objects.

The formula is given as:

= F = (G X M X m) / r²

where,

Force = F

Gravitational Constant = G

Mass of one object = M

Mass of another object = m

Distance = r

According to Newton's universal law of gravitation, The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of the distance between them.

The force of attraction on a body by earth is called gravitational force. Example : The leaves and fruits fall from a tree downwards towards the ground.

To know more about Gravitational Force:

https://brainly.com/question/1633884

#SPJ4

The intensity reflection coefficient (irc) is 1.

The ratio of the intensity of the reflected wave to the incident (transmitted) wave is known as the intensity reflection coefficient.

Intensity of incident (transmitted) sound wave = 50 W/cm².

As it  is totally reflected,  intensity of the reflected sound  wave = 50 W/cm².

Hence,  intensity reflection coefficient =

intensity of the reflected sound wave ÷ Intensity of incident sound wave

= 50  W/cm² /  50 W/cm².

= 1.

Learn more about reflection coefficient here:

https://brainly.com/question/28145974

#SPJ4

Direct emissions from owned or controlled sources are covered by Scope 1. The generation of the purchased electricity, steam, heating, and cooling used by the reporting company is covered by scope 2's indirect emissions. All other indirect emissions that take place along a company's value chain are covered by scope 3.

The most frequent source of Scope 1 emissions is natural gas. Both large manufacturing companies and power companies frequently use it to produce electricity. Other industrial applications include heating, road transportation, and the production of a variety of goods like glass, steel, and plastics.

The organization's global scope 1, 2, and 3 emissions are included in the Net Zero target's perimeter.

To know more about natural gas visit:-

brainly.com/question/3261461

#SPJ4

Planetesimals' orbits were disturbed by orbital resonance with Jupiter, which prevented them from accreting into planets.

Orbital resonance happens when the gravitational forces of celestial bodies that are periodically orbiting one another interact, and this interaction is sometimes expressed as a ratio of tiny integers.

Jupiter has the ability to influence the asteroid belt since it is so large and is located very close to the asteroid belt compared to other planets. Asteroids are literally pushed out of the orbital resonances with Jupiter at the locations where they exist, leaving empty space in their wake.

Since Daniel Kirkwood, an American astronomer, was able to foresee and characterise such occurrences in the middle of the 1800s, the region has been virtually free of asteroids. Kirkwood gaps were later used to describe this paucity of asteroids in the region of Jupiter's orbital resonances.

To know more about asteroid belt:

https://brainly.com/question/27925842

#SPJ4

The time taken for the feather to drop to the surface, given that the gravitational acceleration is 1.6 m/s², is 1.4 s

From motion under gravity, we understood that height and time are related according to the follwing formula:

h = ½gt²

Where

Using the above formula, we can obtain the time taken for the feather to drop to the surface. Details below:

h = ½gt²

1.6 = ½ × 1.6 × t²

1.6 = 0.8 × t²

Divide both side by 0.8

t² = 1.6 / 0.8

Take the square root of both side

t = √(1.6 / 0.8)

t = 1.4 s

Thus, the time take is 1.4 s

Learn more about time:

https://brainly.com/question/14195937

#SPJ1

Their final temperature is 247.84 K.

When two physical systems are linked by a channel permeable to heat, they are said to be in thermal equilibrium if there is no net transfer of thermal energy between them. The zeroth law of thermodynamics is seen during thermal equilibrium.

Given that: container 1 initially held 78.3 kg of liquid at a temperature of 271 K, and container 2 initially held 50.6 kg of the same liquid at a temperature of 212 K.

Let the final temperature be T.

As the materials of both container 1 and 2 is same and the comes thermal equilibrium,

78.3 (271-T) = 50.6 ( T - 212 )

(50.6 + 78.3) T = 78.3*271 + 50.6*212

T = 247.84 K.

Hence, the final temperature is 247.84 K.

Learn more about thermal equilibrium here:

https://brainly.com/question/29419074

#SPJ1

The flow of blood from into the heart to out of the heart is given as Right atrium→tricuspid valve→right ventricle→pulmonary semilunar valve→pulmonary trunk→pulmonary arteries→lung capillaries→pulmonary veins→left atrium→bicuspid valve→left ventricle→aortic semilunar valve→aorta

The right atrium receives deoxygenated blood from the body through two large veins, the posterior (inferior) and anterior (superior) vena cava.

Through the tricuspid valve, blood is transferred from the right atrium to the right ventricle. Tricuspid valve closure occurs when the ventricle is full to stop blood from returning to the atrium.

Through the pulmonary vein, blood that has been oxygenated by the lungs enters the left atrium.

Blood can go from the left atrium into the left ventricle when the mitral valve is open. When the ventricle is full, the mitral valve closes to prevent blood from returning to the atrium.

Blood may move from the heart to the aorta and from there to the rest of the body thanks to the aortic valve.

To know more about blood circulation:

https://brainly.com/question/14385782

#SPJ4

Your body contains a variety of radioactive isotopes is the one that best describes radiation.

(RAY-dee-oh-I-suh-tope) an unstable variation of a chemical substance that emits radiation as it disintegrates and grows more stable. Both natural and artificial radioisotopes can be created. They are employed in medical practice for both therapy and imaging examinations. termed radionuclide as well.

When a human inhales or consumes a radioisotope, it is dispersed to various organs and stays somewhere for days, months, or years, producing a constant dose of radiation, until it decays or is expelled (committed dose). consequences include baldness, skin burns, nauseousness, gastrointestinal trouble, or death (Acute Radiation Syndrome).

To know more about radioactive isotopes visit:

https://brainly.com/question/2028971

#SPJ4