A belt of negligible mass passes between cylinders A and B and is pulled to the right with a force P. Cylinders A and B weigh, respectively, 5 and 20 lb. The shaft of cylinder A is free to slide in a vertical slot and the coefficients of friction between the belt and each of the cylinders are µs = 0.50 and µk = 0.40. For P = 3.6 lb,
Determine:
(a) Whether slipping occurs between the belt and either cylinder,
(b) The angular acceleration of each cylinder.

Answer:

a) ferromagnetic type,  b) superconductor or ferromagnetic

Explanation:

In substances, magnetism is the result of the magnetic moments of the electrons in their orbits and of the spin.

These two let us take interacting magnetic between them, if the sum of these magnetic moments is maximum we have a material of the ferromagnetic type, which is represented in figure a, where all the magnetic moments are aligned in one direction and this type of material is a magnet permanent.

Figure b shows a material where the magnetic moments have a circular shape, so the total moment is zero.The type of substrate material can have several possibilities

* The most test is that the substrate material is a superconductor where the marked areas are the superconducting magnetic areas and the areas without spine are the normal areas

* Another possibility is that the material is ferromagnetic, that is, there are several magnetic sub-networks in different orientation, resulting in a random field, the material is not a permanent magnet

Answer:

2

Explanation:

Answer:

ozone, letter b

ozone is basically an allotrope of oxygen having three atoms instead of two.

Answer:

i am guessing for reflection but not so sure

Explanation:

it's generally proven that the formula for kinetic energy is k. e = ½mv²

= ½×2×3

=3

Answer: The Strong Nuclear Force is an attractive force between protons and neutrons that keep the nucleus together and the Weak Nuclear Force is responsible for the radioactive decay of certain nuclei.

Explanation:

Answer:

Turned up side down

Explanation:

Answer:

Because the forces acting on the student are creating a net force.

Explanation:

I took the test and that was the answer

Answer:

Because the forces acting on the student are creating a net force

Explanation:

I think it's

1. Networking on LinkedIn

Answer:

The answer is D.250N.

Explanation:

Answer:

m = 0.01 kg

Explanation:

Given that,

Momentum of the marble, p = 0.15 kg-m/s

Speed of the marble, v = 15 m/s

We need to find its mass. We know that,

Momentum, p = mv

Where

m is the mass

[tex]m=\dfrac{p}{v}\\\\m=\dfrac{0.15}{15}\\\\m=0.01\ kg[/tex]

So, the mass of the marble is equal to 0.01 kg.

Answer:

10

Explanation:

lyezurzup?y?ur if fk kgs7rsjzkgzitz

Answer:

In a healthy eye, the cornea bends or refracts light rays so they focus precisely on the retina in the back of the eye.  The back of the eye is lined with a thin layer of tissue containing millions of photoreceptor (light-sensitive) cells. This is the retina, where light rays focus into an upside-down image.

Explanation:

Answer:

sedimentary rock formed over a long period of time. small pieces of rock called sediments are carried away and deposited in layers. over time more and more layers of sediments form, pressing down on the layers below. the weight of the layers squeezes the sediments together during the process know as compaction. as the water is squeezed out, crystals form. the sediments stick together. this process is called cementation

Answer:

3 * 10³J/s

Explanation:

Given :

Force applied, F = 300 N

Distance, d = 30 m

Time, t = 3 seconds

Power, P = Workdone / time

Recall :

Workdone = Force * distance

Workdone = 300 N * 30 m = 9000 Nm

Workdone = 9 * 10³ J

Power = (9 * 10³ J) / 3s

Power = 3 * 10³J/s

Answer:

0.5x35=17.5

Explanation:

You throw 0.5 kg the ball leaves your hand with

A speed of 35

Answer:

It is because of air pressure

Explanation:

Filling a fountain pen with ink involves various methods, but the most common approach uses a piston or converter mechanism.

To begin, the pen is prepared by removing the cap and separating the barrel from the grip section. The type of filling system is checked, whether it's a built-in piston or a removable converter.

For a piston-filling method, the knob is twisted counterclockwise to retract the piston. The nib is submerged in the ink bottle, and by turning the knob clockwise, the piston extends, creating a vacuum that draws ink into the reservoir through capillary action.

The piston is then retracted, sealing the ink inside. In the case of a converter, it is removed from the grip section and dipped into the ink bottle, followed by operating the plunger or squeezing to expel air.

Releasing the plunger allows ink to enter the converter through atmospheric pressure. After cleaning any excess ink, the pen is reassembled.

Know more about fountain pen:

https://brainly.com/question/17340241

#SPJ4

Answer:

v = 6.195 m / s

Explanation:

For this exercise we can use the conservation of energy, for the system formed by the ball and the pulley

starting point. Higher before releasing the system

        Em₀ = U = M g h

final point. When the ball has lowered h = 2

        Em_f = K = ½ M v² + ½ I w²

the energy is preserved

        Em₀ = Em_f

        M g h = ½ M v² + ½ I w²

angular and linear velocity are related

         v = w r

        w = v / r

indicate that the moment of inertia is

         I = ½ m r²

we substitute

          M g h = ½ M v² + ½ (½ m r²)  (v/r) ²

          ½ v² (M + [tex]\frac{1}{2}[/tex] m) = M g h

          v² = [tex]2gh \ \frac{M}{M + \frac{m}{2} }[/tex]

let's calculate

          v = [tex]\sqrt{ 2 \ 9.8 \ 2 \ \frac{70}{70 + 1.5} }[/tex]

          v = 6.195 m / s

Answer:

C) Kinetic energy

Explanation:

Since the skateboarder is ALREADY going down the hill, he is using kinetic energy.

Kinetic energy is when you're moving and in motion

Answer:

I’m not okay . Me and my bf are bickering once again

Answer:

Periodic.

Explanation:

Electromagnetic waves is a propagating medium used in all communications device to transmit data (messages) from the device of the sender to the device of the receiver.

Generally, the most commonly used electromagnetic wave technology in telecommunications is radio waves.

Radio waves can be defined as an electromagnetic wave that has its frequency ranging from 30 GHz to 300 GHz and its wavelength between 1mm and 3000m. Therefore, radio waves are a series of repetitive valleys and peaks that are typically characterized of having the longest wavelength in the electromagnetic spectrum.

Basically, as a result of radio waves having long wavelengths, they are mainly used in long-distance communications such as the carriage and transmission of data.

Generally, a fixed speed is used for the propagation of traveling waves and this speed is usually denoted with the variable "v" or sometimes "c."

Furthermore, if the waveform of a traveling wave is repeated every time at specific intervals T, it is referred to as periodic wave.

Mathematically, the period of a traveling wave is given by the formula;

[tex] Period = \frac {1}{T} [/tex]

Where;

T is the time measured in seconds.

Answer:

In business and economics, fundamentals represent the primary characteristics and financial data necessary to determine the stability and health of an asset. This data can include macroeconomic, or large-scale factors, and microeconomic, or small-scale factors to set a value on securities or businesses.

Explanation:

Answer found from:

https://www.investopedia.com/terms/f/fundamentals.asp#:~:text=In%20business%20and%20economics%2C%20fundamentals,value%20on%20securities%20or%20businesses.

Answer:

The object moving in a straight path is called linear or rectilinear motion.

An object is said to be in rectilinear motion if it changes its position,along a straight line path.

Explanation:

example: A car moving in a straight road.

A jet moving straight in air