A cylinder has a volume of 2,309.07 cubic cm and a height of 15 cm. What is the
radius of the cylinder? Use 3.14 for st in your calculations and round to the
nearest whole number.
cm

Answer:

i got u fam!!!!!!!!!!!!!!!

its 15625

Step-by-step explanation:

Answer:

89 people

Step-by-step explanation:

By using structured references, the formulas will automatically refer to the data within the column of the Excel Table, even if the table expands or shrinks when you add or remove data.

To convert the data into an Excel Table and perform the analysis using structured references, you can follow these steps:

Select the entire data range, including the headers and the values.

In the Excel menu, go to the "Insert" tab and click on "Table." Choose a table style that you prefer.

Excel will automatically detect the range of your data. Make sure to check the box that says "My table has headers" if your data has headers.

Click "OK" to create the Excel Table.

Once you have created the Excel Table, you can perform the analysis and display the summary statistics using structured references. Here's how you can do it:

To calculate the Mean, use the formula =AVERAGE(Table1[LO]) and place it above the "LO" column header.

To calculate the Median, use the formula =MEDIAN(Table1[LO]) and place it above the "LO" column header.

To calculate the Minimum, use the formula =MIN(Table1[LO]) and place it above the "LO" column header.

To calculate the Maximum, use the formula =MAX(Table1[LO]) and place it above the "LO" column header.

To calculate the 75th percentile, use the formula =PERCENTILE.INC(Table1[LO],0.75) and place it above the "LO" column header.

To calculate the 25th percentile, use the formula =PERCENTILE.INC(Table1[LO],0.25) and place it above the "LO" column header.

To calculate the Interquartile Range, use the formula =QUARTILE.INC(Table1[LO],0.75) - QUARTILE.INC(Table1[LO],0.25) and place it above the "LO" column header.

To calculate the Variance, use the formula =VAR(Table1[LO]) and place it above the "LO" column header.

To calculate the Standard Deviation, use the formula =STDEV(Table1[LO]) and place it above the "LO" column header.

Make sure to adjust the table name (Table1) and column reference (LO) in the formulas based on your actual table and column names.

By using structured references, the formulas will automatically refer to the data within the column of the Excel Table, even if the table expands or shrinks when you add or remove data.

To know more about Excel Table:

https://brainly.com/question/30109169

#SPJ4

Answer:

30 or 780 is your answer for the first one. i dont know how to work out the answer for the 2 one im sorry :(

Step-by-step explanation:

13+12+5 = 30

13 x 12 x 5 = 780

I would go for 780

it seems more like to be the answer

Both the empty set (∅) and singleton sets are considered connected. The empty set is connected by definition, and a singleton set is connected because it cannot be divided into two non-empty open sets.

The statement that empty sets and singletons are always connected is true. Let's prove it for both cases:

1. Empty Set (∅):

The empty set (∅) is considered connected by definition. A set is said to be connected if there are no two non-empty open sets whose union is the set and whose intersection is empty. Since the empty set does not contain any elements, there are no open sets to consider, and thus it satisfies the definition of connectedness. In other words, there are no non-empty sets to separate the empty set, making it connected.

2. Singleton Set ({x}):

A singleton set, which contains only one element, is also connected. To prove this, let's assume the singleton set {x} is not connected. This means there exist two non-empty open sets A and B such that {x} is the union of A and B, and A and B have an empty intersection.

Since A and B are non-empty and their union is {x}, it means that each of them contains at least one point from the singleton set {x}. However, since the intersection of A and B is empty, it implies that A and B cannot contain any additional points other than x. This contradicts the assumption that A and B are open sets since they do not contain any points other than x.

Therefore, the assumption that {x} is not connected leads to a contradiction. Hence, {x} must be connected.

In conclusion, both the empty set and singleton sets are always connected.

To know more about the singleton sets refer here :

https://brainly.com/question/3192224#

#SPJ11

Answer:

C is the correct answer

Step-by-step explanation:

Based on the data provided, the correct statement is:

A. The average size of a seventh-grade class is larger and varies more than that of a kindergarten class.

Here's the explanation:

1. Average class size:

The mean (average) class size for kindergarten is given as 20, while for the seventh grade, it is given as 32. Since 32 is greater than 20, we can conclude that the average size of a seventh-grade class is larger than that of a kindergarten class.

2. Variation in class sizes:

The mean absolute deviation (MAD) is provided as 1.2 for kindergarten and 2 for the seventh grade. The MAD measures the average amount by which each data point differs from the mean. A higher MAD indicates greater variability. In this case, the MAD for the seventh grade (2) is higher than that for kindergarten (1.2), indicating that the class sizes in the seventh grade vary more than those in kindergarten.

Therefore, the average size of a seventh-grade class is larger and varies more than that of a kindergarten class.

Learn more about Mean here:

https://brainly.com/question/31101410

#SPJ2

Answer:

A =28.26

Step-by-step explanation:

Using the area formula

A = pi r^2

We use pi = 3.14 and the radius is 3

A = 3.14 * (3)^2

A = 3.14 *9

A =28.26

The statement that is correct about the simple shortest path problem is: The problem is ill-posed if the graph contains a negative-length cycle.

If the graph has a negative-length cycle, the shortest path will loop around that cycle an infinite number of times and, as a result, it is difficult to find the shortest path.

The Simple Shortest Path problem is a popular algorithmic issue in computer science. It is well-known that this issue may be solved in O(m log n) time using a variety of algorithms.

Dijkstra’s algorithm is a simple algorithm that is usually used to solve this issue. This algorithm works by maintaining a set of vertices that have already been visited while also maintaining a heap with all of the vertices that have yet to be explored.

The algorithm then picks the vertex with the lowest cost from the heap and processes all of its neighbours.

The cost of each neighbour is calculated by adding the weight of the edge connecting the current vertex to the neighbour vertex to the cost of the current vertex.

To learn more about : graph

https://brainly.com/question/19040584

#SPJ8

1. The difference between a sequence and a series is that a sequence is an ordered list of numbers, while a series is the sum of the terms in a sequence.

2. To solve series and sequence questions, various techniques can be used, such as finding patterns, using formulas, or applying mathematical operations like addition, subtraction, multiplication, or exponentiation.

3. Counting and probability are branches of mathematics that deal with quantifying and analyzing the likelihood of events. Counting involves determining the number of possible outcomes in a given situation.

4. The three principles of counting are the multiplication principle, the addition principle, and the principle of complementary counting.

1. A sequence is an ordered list of numbers, typically denoted as a₁, a₂, a₃, ..., where each term in the sequence is identified by its position or index. For example, {1, 3, 5, 7, 9} is a sequence. On the other hand, a series is the sum of the terms in a sequence. For instance, the series corresponding to the sequence mentioned earlier would be 1 + 3 + 5 + 7 + 9.

2. To solve series and sequence questions, it is important to look for patterns or relationships between the terms. For sequences, one can identify a pattern and use it to generate subsequent terms. In series, formulas or techniques like finding the sum of an arithmetic or geometric progression can be applied.

3. Counting involves determining the number of possibilities or outcomes in a given situation. It can involve simple counting principles or more complex techniques like combinations and permutations. Probability, on the other hand, deals with quantifying the likelihood of events. It uses mathematical calculations to determine the probability of specific outcomes or events occurring.

4. The three principles of counting are fundamental rules used in counting problems:

The multiplication principle states that if there are 'm' ways to do one thing and 'n' ways to do another, then there are 'm x n' ways to do both.

The addition principle states that if there are 'm' ways to do one thing and 'n' ways to do another, then there are 'm + n' ways to choose one of the two options.

The principle of complementary counting states that if there are 'm' ways to do something, then there are 'm' ways not to do it. By subtracting the number of ways not to do something from the total number of possibilities, one can determine the desired outcome.

To learn more about sequence click here: brainly.com/question/30262438

#SPJ11

Answer:

A transformation that turns a figure around a fixed point, called the center of rotation. hope this helps

Step-by-step explanation:

Answer: this link will help you out

Step-by-step explanation:              https://www.khanacademy.org/math/cc-eighth-grade-math/cc-8th-linear-equations-functions/constructing-linear-models-real-world/v/word-problem-solving-4

The number of values in each group of the data set would be equal to the degrees of freedom for each group plus one.

In order to determine the number of values in each group of the data set based on the partially completed ANOVA table, we need to consider the total number of observations and the number of groups.

The ANOVA table consists of three main components: "Source of Variation," "Sum of Squares (SS)," and "Degrees of Freedom (df)." The "Source of Variation" represents the different factors or groups in the data set, while the "Sum of Squares" measures the variability within each group. The "Degrees of Freedom" represents the number of independent pieces of information available for estimating the population parameters.

In this case, since all groups are of the same size, we can determine the number of values in each group by examining the "Degrees of Freedom" column. The degrees of freedom for each group is the group size minus one (df = group size - 1). By adding one to the degrees of freedom for each group, we obtain the number of values in each group.

Learn more about ANOVA here:

https://brainly.com/question/30762844

#SPJ4

The Lewis family used their sprinkler for 30 hours, while the Pham family used theirs for 25 hours.

Let's assume x represents the number of hours the Lewis family used their sprinkler, and y represents the number of hours the Pham family used their sprinkler. We can set up a system of equations based on the given information.

Equation 1: x + y = 55 (The combined total of hours)

Equation 2: 30x + 25y = 1475 (The total water output in liters)

To solve this system of equations, we can use substitution or elimination methods. By solving Equation 1 for x and substituting it into Equation 2, we get:

30(55 - y) + 25y = 1475

1650 - 30y + 25y = 1475

-5y = -175

y = 35

Substituting the value of y into Equation 1, we find:

x + 35 = 55

x = 20

Therefore, the Lewis family used their sprinkler for 20 hours, while the Pham family used theirs for 35 hours.

To learn more about “equations” refer to the https://brainly.com/question/2972832

#SPJ11

Answer:

Step-by-step explanation:

960 which is the area u divide by the one foot which is 144 square units to get your answer,6.66666666667

Answer:

(-6, -7)

Step-by-step explanation:

For the x coordinates:

-1 - 4 = -5

-1 + -5 = -6

For the y coordinates:

-5 + -3 = -2

-5 + -2 = -7

I don't know how to explain it well sorry

The required, function that models the balance of Stephani's account is

[tex]B(t) = 325(0.005)^t[/tex]. Option B is correct.

The function that models the balance of Stephani's account, B(t), in dollars, as a function of time, t, in months, can be determined using the given information.

Given:

Bank charges a fee of 0.5% per month for having a checking account.

Stephani's account has $325 in it.

The function that models the balance of Stephani's account, B(t), in dollars, as a function of time, t, in months, is:

b: [tex]B(t) = 325(0.005)^t[/tex]

In this function, the initial balance is $325, and the bank charges a fee of 0.5% per month, which is equivalent to 0.005 as a decimal. The exponent "t" represents the number of months, and with each passing month, the balance is reduced by 0.5%.

Learn more about function here:

https://brainly.com/question/12153483

#SPJ12

Answer:

hi

Step-by-step explanation:

i think so

hope it helps

have a nice day

y=15x+50 it should look something like that

A form a basis for R3.

To show that the columns of A form a basis for R3 , we need to show that they are linearly independent and span R3.

To show linear independence, we need to find constants c1 , c2 and c3 , not all zero , such that c1(4,1,0) + c2 (1,0,-2) + c3(0,1,-5) = (0,0,0).

This gives us a system of linear equations , which we can write in augumented matrix form as :

[4 1 0 | 0]

[1 0 1 | 0]

[0 -2 -5 | 0]

we can use row operations to reduce this matrix to row echelon form:

[4 1 0 | 0]

[0 -2 -5 | 0]

[0 0 1 | 0]

From this we can see that the only solution is c1 = c2 = c3 = 0, which means that columns of A are linearly independent.

To show that the columns of A span R3 , we can take any vector

(x, y, z) in R3 and write it as a linear combination of the columns of A :

(x, y, z) = a(4,1,0) + b(1,0,-2) + c(0,1,-5)

Solving for a , b and c, we get

a = (4x - y)/ 14

b = (2y + 5z - 2x)/ 14

c = -z/ 14

Since we can express any vector in R3 as a linear combination of the columns of A, they span R3 .

Therefore , the columns of A form a basis for R3.

Learn more about Vector space: https://brainly.com/question/13258990

#SPJ11

The value of df(4)/dx is  (-e⁻⁴ + e⁴)/2 when function f(x) is cosh(x).

To find df(4)/dx, we need to differentiate the function f(x) = cosh(x) with respect to x.

Using the chain rule, the derivative of f(x) with respect to x is given by:

df(x)/dx = d/dx [cosh(x)]

To differentiate cosh(x), we can use the derivative of e^x, which is e^x, and apply the chain rule:

df(x)/dx = d/dx (e⁻ˣ + eˣ)/2

Applying the chain rule to each term separately:

df(x)/dx = (d/dx [e⁻ˣ ] + d/dx [eˣ))/2

The derivative of e⁻ˣ is -e⁻ˣ, and the derivative of eˣ is eˣ:

df(x)/dx = (-e⁻ˣ+ eˣ)/2

Now, to find df(4)/dx, we substitute x = 4 into the derivative:

df(4)/dx = (-e⁻⁴ + e⁴)/2

This is the value of df(4)/dx for the function f(x) = cosh(x).

To learn more on Differentiation click:

https://brainly.com/question/24898810

#SPJ4

Answer:

7/8

Step-by-step explanation:

Answer:

7/8

Step-by-step explanation:

simplify 875/1000

Eliza's math book weighs 3⁶⁵/₇₂ pounds, based on fractional subtractions.

Fractional subtraction involves the subtraction of a number with fractions from another.

Subtraction is one of the four basic mathematical operations, including addition, multiplication, and division.

Fractions are portions or parts of a whole value and may be classified as proper, improper, or complex.

The weight of the backpack with Eliza's math book = 18⁷/₉ pounds

The weight of the backpack without Eliza's math book = 14⁷/₈ pounds

The weight of the math book = 3⁶⁵/₇₂ (18⁷/₉ - 14⁷/₈) pounds

Thus, using fractional subtractions, we can conclude that Eliza's math book weights 3⁶⁵/₇₂ pounds.

Learn more about fractional subtractions at

https://brainly.com/question/31228321

#SPJ4

Question Completion

Eliza’s backpack weighs 18⁷/₉ pounds with her math book in it. Without her math book, her backpack weighs 14⁷/₈ pounds. How much does Eliza’s math book weigh?

Answer:

Distance from the moon is 2.4 × 10⁵ miles

Step-by-step explanation:

Length of 1-inch paperclip = [tex]1.6\times 10^{-5}[/tex] miles

Number of paperclips used to reach the moon = 1.5 × 10¹⁰

Total distance from the moon = Number of paper clips used × Length of one clip

= (1.5 × 10¹⁰) × (1.6 × 10⁻5)

= (1.5 × 1.6) (10¹⁰× 10⁻⁵)

= 2.4 × 10⁽¹⁰⁻⁵⁾ miles

= 2.4 × 10⁵ miles

Distance from the moon is 2.4 × 10⁵ miles.

The benefit: Savings accounts typically have higher interest rates than checking, making it easy for you to grow your money faster. ... Going over that limit can result in a fee or, if you do it multiple times, your bank might convert the account to checking.

Answer:$20

Step-by-step explanation:

If Carlos had $20

Ben would have $60

And Ava would have $40

Answer:

Natalie is 15

Fred is 24

Step-by-step explanation:

You would first create equations to represent the problem. You would then solve for a variable (I chose to solve for y). I subtracted each equation from each other which helped me isolate y, which equaled 15. I then substituted y for 15 which allowed me to isolate x, which gave me 24.

(the equations)

x + y = 39

x + 3y = 69

(solving for y)

x + 3y = 69 - x + y = 39

x-x +3y -y = 69 - 39

2y = 30

y = 15

(solving for x)

x + 15 = 39

x +15 -15 = 39 -15

x = 24

(a) The sample space for this game is the set of numbers on the wheel are 00, 0, 1, 2, ..., 38.

For this game of chance with a wheel consisting of 40 slots, the sample space is defined as the set of all possible numbers that the metal ball can fall into. The numbers range from 00 to 38, including both the double zero and single-digit numbers.

(b) The probability of the ball landing in the slot marked 4 is 1/40, which is equivalent to 0.025 when rounded to four decimal places.

To determine the probability that the metal ball falls into the slot marked 4, we need to calculate the ratio of the favorable outcomes (the ball landing in slot 4) to the total number of possible outcomes.

There is only one slot marked 4, so the number of favorable outcomes is 1. The total number of possible outcomes is 40 since there are 40 slots on the wheel.

This means that if the game is played many times, we can expect the ball to land in slot 4 approximately 0.025 (or 2.5%) of the time.

(c) The probability that the metal ball lands in an odd slot is 0.5.

To determine the probability that the metal ball lands in an odd slot, we count the number of odd slots on the wheel. Odd numbers occur every other slot starting from 1, so there are a total of 20 odd slots on the wheel.

The probability of the ball landing in an odd slot is given by the ratio of the number of odd slots to the total number of possible outcomes. Therefore, the probability is 20/40, which simplifies to 1/2 or 0.5 when rounded to four decimal places.

This means that if the game is played many times, we can expect the ball to land in an odd slot approximately 0.5 (or 50%) of the time.

The correct choices are:

(b) If the wheel is spun 1000 times, it is expected that about 25 of those times result in the ball landing in slot 4.

(c) If the wheel is spun 100 times, it is expected that exactly 50 of those times result in the ball landing on an odd number.

To know more about sample space refer here:

https://brainly.com/question/30411309#

#SPJ11

(a) To test the hypotheses H0: μ = 22.5 versus H1: μ ≠ 22.5, a t-test can be used with a significance level of α = 0.05. The sample mean of the interior temperatures is calculated as 22.496, and the sample standard deviation is computed as 0.402.

Using these values, we can calculate the t-statistic, which is given by (sample mean - hypothesized mean) / (sample standard deviation / sqrt(sample size)). Plugging in the values, we have (22.496 - 22.5) / (0.402 / sqrt(5)), resulting in a t-statistic of -0.020.

Next, we determine the degrees of freedom, which is the sample size minus 1, giving us 4.

Using the t-distribution table or a t-distribution calculator, we find the critical t-value for a two-tailed test with α = 0.05 and 4 degrees of freedom to be approximately ±2.776.

Since the absolute value of the calculated t-statistic (0.020) is less than the critical t-value (2.776), we fail to reject the null hypothesis.

(b) To check the assumption of normal distribution for the interior temperatures, a graphical method such as a histogram or a Q-Q plot can be used. Additionally, statistical tests such as the Shapiro-Wilk test can be employed to formally assess normality.

Know more about (a) To test the hypotheses H0: μ = 22.5 versus H1: μ ≠ 22.5, a t-test can be used with a significance level of α = 0.05. The sample mean of the interior temperatures is calculated as 22.496, and the sample standard deviation is computed as 0.402.

Know more about Histogram here:

https://brainly.com/question/31828911

#SPJ11