To observe the impact of the herbicide on the molecular structures inside plant cells, a microscope with high resolution and the ability to visualize small structures would be the best tool for this research. One option that could be suitable for this purpose is a transmission electron microscope (TEM).
A transmission electron microscope uses a beam of electrons to produce an image of the sample being studied. It has a higher resolution than a light microscope, and it is able to visualize structures as small as 0.2 nanometers in size. This makes it an ideal tool for studying the molecular structures inside cells, including proteins, DNA, and other cellular components.
Another option that could be used for this research is a scanning electron microscope (SEM). A scanning electron microscope uses a beam of electrons to produce a detailed, three-dimensional image of the surface of a sample. It has a lower resolution than a TEM, but it is able to visualize larger structures and features on the surface of cells.
Both TEMs and SEMs are powerful tools for studying the structures and functions of cells and molecular processes, and they are commonly used in scientific research and other applications.
To know more about microscope
https://brainly.com/question/18661784
#SPJ4
Q3. An object has a weight of 70 N. How high can the object be lifted, if 210 J of work is done on it?
Answer:
The height will be 3
Explanation:
force(f) = 70N
work(w) = 210 J
distance(d) = ?
w = f × d
210 = 70 × d
210 = 70d
divide both sides by (70) to get d
[tex] \frac{210}{70} = \frac{70d}{70} [/tex]
d = 3
i hope this helps
Important Formulas:
[tex]w=Fd[/tex]
work(measured in joules) = force(measured in newtons) * distance(measured in meters)
__________________________________________________________
Given:
[tex]F=70N[/tex]
[tex]w=210J[/tex]
[tex]d=?[/tex]
__________________________________________________________
Rearrange formula to make distance the subject:
[tex]W=Fd[/tex]
[tex]\dfrac{W}{F} =\dfrac{Fd}{F}[/tex]
[tex]d=\dfrac{W}{F}[/tex]
__________________________________________________________
[tex]d=\dfrac{210}{70}[/tex]
__________________________________________________________
[tex]\fbox{d = 3 meters}[/tex]
are jeep wranglers 2003 six cylender prone to heater problems?not much heat coming out of heater engine temp is normal
Reason-1. Blower Motor and Resistor: This particular part is responsible for taking the heated air from your coolant system and pushing it through your hot heater core. From here the air will pass through your ventilation system and enter the cabin.
2. Incorrect Coolant Level: all you need to do to fix this is to add more coolant. Fill it up to the appropriate level, and you’re good to go. Take your heating system for a test drive. If the problem persists, you need to check through some of our other options. If the problem no longer persists, you’re good to go.
3. Thermostat: Our third common reason for a heater not working is a broken thermostat. Your heater core, and sometimes even your radiator, is designed to work in accordance with a thermostat
4. Hoses: As we mentioned earlier, if your coolant system is not working correctly, your heater core won’t either. So, if you have a damaged component in your coolant system, like a hose, odds are nothing’s going to work right.
To know more about Problems in jeep:
https://brainly.com/question/10184572
#SPJ4
The planets in our solar system orbit the sun. Consider the gravitational force between the sun and the planets. Based on mass alone, the gravitational force would be the greatest between the sun and.
Gravity The principal factor governing the planets' orbits around the sun is gravity. While each planet has its own gravity that is determined by its size and speed of motion, orbit is determined by the gravity of the sun.
If you were to stand on the surface of any planet in the solar system, or, in the case of the ice giants, float in its atmosphere, you would feel the following gravitational pull: Venus: 0.9 g Mercury: 0.38 g Moon: 0.17 g Mars: 0.38 g Saturn: 1.07 g Jupiter: 2.53 g 0.89 g Uranus Jupiter: 1.14 g The Planets' Gravitational Pull The two driving forces that propel the planets around the sun.
To learn more about planet please click on below link
https://brainly.com/question/14581221
#SPJ4
A car makes a trip due north for three-fourths of the time and due south one-fourth of the time. The average northward velocity has a magnitude of 32 m/s, and the average southward velocity has a magnitude of 29 m/s. What is the average velocity (magnitude and direction) for the entire trip?
Answer:
16.75 m/s North
Explanation:
Calculate a weighted average; North is the positive direction
(32 m/s).75 - (29 m/s).25 = 16.75 m/s N
Which planet has an orbital eccentricity most like the orbital eccentricity of the Moon? answer choices.
a. Earth.
b. Saturn.
c. Mars.
d. Mercury.
Saturn planet has an orbital eccentricity most like the orbital eccentricity of the Moon.
An ellipse's eccentricity (e) is a value that affects how it looks, such as whether it is more rounded or if it resembles a segment. Let "a" be the major semi-axis and "c" be the focal semi-distance:
e = c / a
The gravitational forces that propel the planets disappear as they gracefully glide into an orbit around the Sun. However, a planet must follow an orbit to stay inside the bounds of the gravitational pull of other celestial bodies, particularly the sun.
The orbits have an ascending node, a vernal point, an argument of the perihelion, an eccentricity, an inclination, and an aphelion. The planets' orbits are all roughly on the same plane. The ecliptic is the name of this orbital plane.
For such more question on orbital eccentricity:
brainly.com/question/28921987
#SPJ4
Info: The sign of the induced voltage as the North-pole end of the magnet moves toward a coil (which is connected to a light bulb/voltage meter) is: answer is Negative. And as the magnet passes through the coil and the South-pole end recedes away from the coil, the sign is: answer is Positive.The next question I need answered:Relate these two findings to Lenz's law.Please help!Thanks!
Lenz's law is related with the sign of the induced emf or voltage in a coil and states that the induced voltage always appear in such a direction as to oppose the cause of its production, that is, rate of change of emf.
According to Lenz's law, which deals with the sign of the induced emf or voltage in a coil, the induced voltage always manifests in a way that is opposite to the emf change rate that led to its induction.
Now, as the north pole of the magnet draws nearer to the coil, the magnetic flux connected to the coil increases, causing the induced voltage to be negative, causing that face of the coil to function as the north pole, repelling the approaching north pole (opposes the increase of magnetic flux). Likewise, the induced voltage's sign changes to positive as the S pole of the magnet moves away from the coil, causing that face of the coil to behave as described.
Learn more about Lenz's law here:
https://brainly.com/question/12876458
#SPJ4
What is the average speed of a stone falling from the roof of a 6 m high house?
Answer:
Below
Explanation:
Speed at beginning = 0
speed at bottom = ?
d = 1/2 at^2
6 = 1/2 (9.81)(t^2 ) shows t = 1.1 s
vf = at = 9.81 ( 1.1) = 10.85 m/s
Average = ( 10.85 - 0) / 2 = 5.42 m/s average
A moon orbits a planet in a nearly circular orbit of radius r, as shown in the figure. question the moon has a mass of 1×1022 kg, and the gravitational field strength at a distance r from the planet is 0.001 n/kg. what is the gravitational force exerted on the moon while it is in orbit around the planet?
The gravitational force exerted on the moon while it is in orbit around the planet is 1 × 10¹⁹ N.
What is gravitational field strength?Gravitational Field Strength is defined as the gravitational force per unit mass experienced by a point mass at a certain point. It is a vector quantity having SI unit Newton/kg.
Mass of the moon: M = 1 ×10²² kg.
The gravitational field strength at a distance r from the planet is: E= 0.001 N/kg.
Hence, gravitational force acting on the moon: F = mE
= 1 ×10²² × 0.001 N
= 1 × 10¹⁹ N.
Learn more about gravitational field strength here:
https://brainly.com/question/18511078
#SPJ4
A satellite is in a circular orbit about the earth (me-5.98 x 1024 kg). the period of the satellite is 2.40 x 104 s. what is the speed at which the satellite travels? G=6.67×10−11N.m2/kg2)
The speed at which the satellite travels is 7.7 kilometers per second.
To calculate the speed at which the satellite travels, we can use the equation
v = sqrt(GM/r)where v is the velocity of the satellite, G is the gravitational constant, M is the mass of the Earth, and r is the radius of the satellite's orbit.
The period of the satellite's orbit, which is the time it takes to complete one orbit, can also be used to calculate the speed of the satellite using the equation
T = 2pisqrt(r^3/GM)where T is the period of the orbit. Solving for v in this equation, we can find that the speed of the satellite is 7.7 kilometers per second.
Learn more about Mass and Velocity here:
https://brainly.com/question/929853
#SPJ4
2. A car is travelling at 50 km/h. The driver sees a child run out into the road 5m ahead. She applies the break and the car stops in 5 seconds. The driver's thinking time is 1.5 s. A. Will the car stop in time?
B. If the driver's thinking time is increased to 2.5 s, will the car stop in time? C. What happens if the thinking time is 1.5 s but the car is travelling at 64km/h?
Anwser:
A: No
B: No
C: No
Explanation:
V = 50km/h = 14m/s
V2 = 0m/s
t = 5s
a = V2 - V/t = -2,8m/s²
The distance the car will drive when hitting the brakes:
t = 5s
a = -2,8m/s²
v = 14m/s
d = v•t + ½a•t² = 14•5 + -1,4•25 = 35m
and 35m is greater than 5m, and this is even with not counting the thinking time(1,5s), in which the car would have traveled an extra 21m. So 56m in total.
a free body diagram with 4 force vectors. the first vector is pointing downward labeled f subscript g baseline, the second is pointing right labeled f subscript p baseline. the third is pointing upward labeled f subscript n baseline. the fourth is pointing left labeled f subscript f. the upward vector is equal in length to the downward vector. the right vector is longer than the left. which statements describe the book and the forces acting on it? check all that apply. the forces are balanced. the forces are unbalanced. the net force is zero. the book is at rest. the net force is to the right. the book is moving to the right.
The book moves towards the right. So the correct answer is Option D.
According to the free body diagram, the upward and downward forces are equal in magnitude as they have the same length of the vector but are directed in opposite direction.So these two components of force nullify each other. The force vectors towards the right side and left side are opposite in direction but are not equal in magnitude. Since the length of the force vector towards the right side is longer in length than that towards the left side, hence they do not nullify each other. The forces are unbalanced and the net force is directed towards the right side. So the book moves towards the right side.
For further details about Unbalanced force, follow the link: https://brainly.com/question/30027554
#SPJ4
Heroin addicts can now be given pharmaceutical treatment to help curb their desire and addiction. Which mechanism would help an addict decrease their addiction?
Heroin addicts can now be given pharmaceutical treatment to help curb their desire and addiction. Which mechanism would help an addict decrease their addiction?
A drug that acts as an opioid agonist.
A drug that increases GABA.
A drug that increases serotonin and dopamine levels in the synapse.
A drug that increases norepinephrine levels in the synapse.
A drug that acts as an opioid agonist mechanism would help an addict decrease their addiction.
What is opioid agonist therapy?Opioid agonist treatment is a safe and effective medication-based treatment for people who are dependent on opioid drugs such as heroin, oxycodone, hydromorphone (Dilaudid), fentanyl and Percocet.
The treatment helps clients and patients who live with opioid addiction improve their day-to-day functioning, find stability, manage withdrawal symptoms, and work toward recovery. It can lower the risk of drug-related harms, including hepatitis C and HIV transmission as well as fatal overdose. It can also help people stay in treatment and engage in their care.
Taking opioid agonist drugs like methadone, buprenorphine/naloxone (Suboxone), or slow-release oral morphine is a necessary part of opioid agonist treatment (Kadian).
To learn more about opioid therapy, refer the link:
https://brainly.com/question/29800692
#SPJ4
An opioid agonist medication would aid an addict in lessening their dependence.
What is Opoid therapy?For those who are dependent on opioid narcotics including heroin, oxycodone, hydromorphone (Dilaudid), fentanyl, and Percocet, opioid agonist treatment provides a secure and productive medication-based treatment option.
Clients and patients receiving treatment for opioid addiction are able to operate better on a daily basis, find stability, control withdrawal symptoms, and make progress toward recovery. It can reduce the chance of drug-related problems, such as the spread of HIV and hepatitis C as well as fatal overdoses. It may also encourage patients to participate in their care and stay in therapy.
Opioid agonist therapy requires the use of opioid agonist medications like methadone, buprenorphine/naloxone (Suboxone), or slow-release oral morphine (Kadian).
Therefore, An opioid agonist medication would aid an addict in lessening their dependence.
To learn more about Opoid, refer to the link:
https://brainly.com/question/26332595
#SPJ4
Match the description of the star with its life cycle stage: protostar, main sequence star, white dwarf, red giant.
(a) Burns helium as its primary fuel
(b) Burns hydrogen as its primary fuel
(c) Begins to have carbon build-up in the core
(d) Is near its final stage of evolution
(e) Is no longer undergoing fusion
The match description of these stars with their life cycle stage are as follows:
Protostar: D. Is near its final stage of evolution.Main sequence star: B. Burns hydrogen as its primary fuel.White dwarf: A. Burns helium as its primary fuel.Red giant: E. Is no longer undergoing fusion.What does the life cycle of a star?Stars follow the same 7-stage cycle in their lives. The life cycle is as follows:
Giant gas cloud.Protostar, which results from the heat energy produced by the molecular cloud. A star evolution is near its final stage.The t-Tauri phase happens when a star starts releasing energy.Main sequence star, release more heat as it burns hydrogen as the primary fuel.A red giant is when a star runs out of fuel and cannot undergo fusion anymore.Supernovae and planetary nebulae. The more giant star blasted away and formed a black hole, whereas the less massive star do not explode and become a white dwarf.Learn more about protostar here https://brainly.com/question/28231478
#SPJ4
When did sonar map the ocean floor?
Sonar, or underwater sound projectors, were originally utilised during World War I and were the first modern innovation in seafloor mapping.
Who was the first to map the ocean floor?
Sonar was being used to map deep water areas by the Coast and Geodetic Survey, which was the forerunner of NOAA's Ocean Service, by the 1920s.
Marie Tharp , who was born in Michigan in 1920, worked as both a geologist and a cartographer. Tharp was the first to map the ocean floor scientifically in collaboration with her coworker Bruce Heezen. In the 1940s, Tharp started her career in science as a geologist for Stanolind Oil.
To know more about sonar, visit:
brainly.com/question/20510435
#SPJ4
you throw a ball up into the air at 84 m/s. when it reaches a velocity of 32 m/s, how high above the ground is it? use 10 m/s2 for gravity and answer in m.you throw a ball up into the air at 84 m/s. when it reaches a velocity of 32 m/s, how high above the ground is it? use 10 m/s2 for gravity and answer in m.
When it reaches a velocity of 32 m/s, it is 571.2m high above the ground.
What does velocity refer to?
Velocity is the direction speed of an item in motion as a measure of the rate at which its location is changing as seen from a certain point of view and as measured by a specific unit of time.
The movement of an object that has been launched into the air is known as projectile motion. Only gravity is felt by the item after the initial force that launches it. Projectile and trajectory both refer to the same thing: an object.
Given
Initial velocity ,u = 84m/s
Final velocity, v = 32m/s
Gravity ,g = -10m/s (upward motion, against gravity )
We know, v = u + gt
32 = 84 -10t
10t = 84-32
t = 5.2 s
Now using, s = ut +1/2 gt^2
s = [84*5.2] +1/2[10*5.2^2]
s = 436 + 135.2
s = 571.2m
To learn more about projectile motion use link below:
https://brainly.com/question/24216590
#SPJ4
A pring of force contant 120 N/m i acted up by a contant force of 240n. Calculate the elatic potential tored in the pring
A spring of force constant 120 N/m acted up by a constant force of 240N. Then, the elastic potential energy stored in the spring is 240 Nm.
The elastic potential energy stored in the spring is formulated as follows
PE = ½kx²
Where PE is the elastic potential energy, x is the displacement of the spring from its equilibrium position, and k is the spring force constant.
In this question, the spring force constant is 120 N/m, and the constant force acting on the spring is 240 N. To find the spring displacement, we can use the formula:
F = kx
Where F is the force acting on the spring, x is the displacement, and k is the force constant,
So that:
F = kx
240 N = 120 N/m . x
x = 240 N/120 N/m
x = 2 m
Once x is known, then we can calculate the potential energy of the spring:
PE = ½kx²
PE = ½ (120) (2²)
PE = 60 x 40
PE = 240 Nm
So, the elastic potential energy stored in the spring is 240 Nm.
Learn more about the elastic potential energy of the spring at https://brainly.com/question/29795053
#SPJ4
What are 4 reasons why tariff are imposed?
The 4 reasons why tariff are imposed are:
To protect domestic producersTo protect domestic consumersTo preserve national securityTo protect infant industriesWhat is a Tariff?
A tariff is a type of tax levied on imported goods or services. Tariffs are a common element of international trade The main reasons for imposing tariffs include reducing imports of goods and services by raising prices and protecting domestic producers.
Customs duties usually take one of two forms: specific or ad valorem. A specific tariff is charged on a per-item basis (for example, a tariff of $1,000 per imported vehicle). An ad valorem tax is a duty charged as a percentage of the value of goods (eg 10% of the value of an imported car).
The 4 reasons why tariff are imposed are:
To protect domestic producersTo protect domestic consumersTo preserve national securityTo protect infant industriesTo know more about Tariff, visit:
https://brainly.com/question/8629679
#SPJ4
What are 3 ways genetic diseases are caused?
A single gene mutation, several gene mutations, a combination of gene mutations and environmental variables, or damage to chromosomes (changes in the number or structure of complete chromosomes) can all result in genetic illnesses.
What three effects can a genetic mutation have on an organism?Mutations may have an impact on an organism by altering its phenotype, or they may have an impact on the way DNA codes the genetic information (genotype). When mutations take place, they may be completely fatal or they may result in the termination (death) of an organism.
What exactly are genetic illnesses?Genetic illnesses result from changes or anomalies in an organism's genome. A gene mutation can affect one or more genes, leading to a genetic illness.
To know more about Genetics diseases visit:-
https://brainly.com/question/8061328
#SPJ4
What is the value of slope of line parallel to x-axis?
The slope of a line is a measure of the steepness of its angle with the x-axis. A line parallel to the x-axis has no angle and therefore has a slope of 0.
The slope of a line is a measure of the steepness of its angle with the x-axis. It is calculated by taking the ratio of the change in y-coordinates to the change in x-coordinates (rise over run). A line parallel to the x-axis has no angle and therefore has no rise or run. This means that the change in y-coordinates over the change in x-coordinates is 0, resulting in a slope of 0. This is true for any line parallel to the x-axis, regardless of its length or orientation. A line perpendicular to the x-axis will have a slope of either positive or negative infinity, depending on its orientation. A line that is neither parallel nor perpendicular to the x-axis will have a slope greater than 0 but less than infinity, depending on its angle with the x-axis.
Learn more about parallel here
https://brainly.com/question/12349258?
#SPJ4
A student plots the current voltage graphs of three samples of nichrome wire. The samples have resistances R1, R2 and R3
The conclusions that are correct about the resistance include 1 and 3.
option C is the correct answer.
What is ohms law?
Ohms law states that the current flowing in ohmic conductor is directly proportional to the current across the conductor.
Mathematically, the formula for ohms law is given as;
V = IR
where;
I is the current in the conductorR is the resistance of the resistorThe power dissipated in a circuit is proportional to the square across the circuit.
P = IV
P = I²R
P = V²/R
where;
P is the power dissipated in the circuitFrom the formula given above, the power dissipated in the circuit is directly proportional to the square of voltage and inversely proportional to the resistance of the circuit.
The smaller the resistance, the more power is dissipated in the circuit.
In the given graph, R3 is the least resistance and it will have the most dissipated in the circuit.
Learn more about ohmic conductors here: https://brainly.com/question/13710714
#SPJ1
Which measurable property of water allows water droplets to have a rounded shape?
Surface Tension allows water droplets to have a rounded shape
What is surface tension?
A liquid surface's ability to operate like a stretched elastic membrane is known as surface tension. Small liquid droplets and soap bubbles have almost spherical shapes, which are indicators of this phenomena. Some insects can stand on the surface of water due to this characteristic. The surface tension of water may also support a razor blade. When pushed through the water's surface, the razor blade sinks rather than floats. Another way to think about surface tension is as the result of forces operating in the surface's plane and tending to reduce its area.
The amount of force applied to a surface that is perpendicular to a line of a certain length is a common way to express surface tension based on this theory. The measurement is then in newtons per meter, or joules per square meter.
Therefore, surface tension allows water droplets to be round in shape
To learn more about surface tension click on the link
https://brainly.com/question/138724
#SPJ1
What formula would you use to calculate the frequency of a wave?
The formula for calculating the frequency of a wave is f = 1/T, where f is the frequency in hertz (Hz) and T is the period of the wave in seconds.
What is Frequency?Frequency is a measure of the number of occurrences of a repeating event per unit time. It is also referred to as temporal frequency, which emphasizes the contrast to spatial frequency and angular frequency. Frequency is usually measured in hertz (Hz),
audio signals (sound), radio waves, and light.
Frequency is the number of complete waves that pass a given point in a unit of time, typically expressed in hertz (Hz). A hertz is equal to one cycle per second.
To know more about frequency click-
https://brainly.com/question/254161
#SPJ4
What is the main reason that the gravitational attraction between Earth and the Moon changes each day?
(1) Earth's axis is tilted at 23.5°.
(2) Earth's rotational speed varies with the seasons.
(3) The Moon has an elliptical orbit.
(4) The Moon has a spherical shape
The Moon has an elliptical orbit is the main reason that the gravitational attraction between Earth and the Moon changes each day.
The Effect of Earth's Gravity and Moon's GravityEarth's gravity pulls the moon to the center of the earth, while the moon's gravitational force maintains the moon's position, resulting in a centrifugal force that makes the moon rotate on its axis and surround the earth so that it is not attracted to the earth's center of gravity or stays in its orbit.
The influence of the gravitational force of the earth and the moon is the tides of the sea. The moon's gravitational force pulls seawater toward the moon, affecting wave height and sea level. Because the moon revolves around the earth, there will be times when one side of the earth is closer to the moon. The part that is close to the moon will experience high tide, while the other part that is not close to the moon will experience low tide. The tides are also related to the phases of the moon. Usually, sea water will experience high tides during the full moon.
Learn more about gravitational attraction at https://brainly.com/question/21274057.
#SPJ4
What is solver method?
For what-if analysis, Microsoft Excel add-in program Solver is helpful.
What is Solver? Give an example.Excel Solver allows up to 200 variable cells to be specified. We have a few cells in this example whose values can be modified: projected clients per month (B4), which need to be no more than 50; and Calculate the cost per service (B5) using Excel Solver.
What does Solver's evolutionary technique entail?Although it is not a cure-all, the evolutionary technique enables you to spend less time examining the mathematical aspects of your model while still obtaining "excellent" solutions.
To know more about Excel Solver visit:-
https://brainly.com/question/15032995
#SPJ4
What is total energy formula?
Answer:
Total energy (E) =me=m(u+ke+pe)=U+KE+PE
Is sliding static or kinetic friction?
Kinetic friction is a force that resists the motion of an object moving along a surface whenever two objects' surfaces are in contact with one another.
Is sliding friction kinetic?Sliding friction: What is it? Sliding friction is the resistance that any two items produce as they slide against one another. This friction, sometimes referred to as kinetic friction, is the force required to keep one surface moving along another.
sliding what kind of friction?Sliding friction, also known as kinetic friction, is a contacting force that opposes the movement of two objects sliding against one another or between an entity and a surface.
To know about kinetic friction visit :
https://brainly.com/question/17237604
#SPJ4
please help me get this PLEASE
The shuttlecock began 7 m above the ground and then fell through the vacuum. Therefore, option (A) is correct.
What is the velocity vs time graph?A velocity vs time graph can be described as a type of graph that compares the change in the velocity over a period of time. This graph can be used to describe both the velocity, the direction it is moving, its acceleration, and the displacement.
The slope in a velocity vs time graph is equal to the acceleration of the object and the area under a velocity-time graph is equal to displacement.
In the given height vs time graph, the height of the shuttlecock is 7 meters at time t = 0. If the shuttlecock fell through the thick air, then its acceleration will decrease due to air resistance.
But the blue line is showing constant acceleration as there is no air resistance so the shuttlecock fell through the vacuum.
Learn more about velocity-time graph, here:
https://brainly.com/question/28357012
#SPJ1
Two forces, 300 N and 500 N, act on an 80-kg particle. 300 N north and 500 N east. Find the magnitude of the resultant acceleration if the forces make a 90 angle with each other.
Answer:
7.28 m/s^2.
Explanation:
To find the magnitude of the resultant acceleration of the particle, we can use the equation for Newton's second law of motion:
F = ma
Where F is the resultant force, m is the mass of the particle, and a is the resultant acceleration.
Since the forces are acting at a 90 degree angle to each other, we can treat them as two separate forces and use the Pythagorean theorem to find the magnitude of the resultant force:
F = sqrt((300 N)^2 + (500 N)^2)
= sqrt(90000 N^2 + 250000 N^2)
= sqrt(340000 N^2)
= sqrt(340000) N
= 582.67 N
We can now use this value for the resultant force to find the resultant acceleration:
a = F/m
= 582.67 N / 80 kg
= 7.28 m/s^2
Therefore, the magnitude of the resultant acceleration is 7.28 m/s^2.
A space probe is launched vertically into space. It launches from rest and accelerates at a rate of 29 m/s^2. How many seconds before the probe reaches the speed required to get into orbit 7,850 m/s^2
Answer: 270
Explanation:
To determine how many seconds it would take for a probe to reach that speed starting from rest and accelerating at a rate of 29 m/s^2, you can use the equation for average acceleration:
Average acceleration = (final velocity - initial velocity) / time
Rearranging the terms, we can solve for time:
Time = (final velocity - initial velocity) / average acceleration
In this case, the initial velocity is 0 m/s (since the probe is launching from rest), the final velocity is 7,850 m/s (the speed required to reach orbit), and the average acceleration is 29 m/s^2. Plugging these values into the equation, we get:
Time = (7850 m/s - 0 m/s) / 29 m/s^2 = 270.34 seconds
Therefore, it would take the probe approximately 270 seconds to reach the speed required to get into orbit if it is accelerating at a rate of 29 m/s^2.
What is the unit of wavelength Mcq?
The S.I unit of wavelength is metre. The wavelength is the separation between two crests or troughs that occur back-to-back.
What is the wavelength and frequency unit in the SI?The meter is the wavelength SI unit (m).Its number many oscillations per second is the definition of frequency. Hertz is the SI unit of frequency (Hz).What does wavelength mean?When electromagnetic radiation such as radio waves, light waves, or infrared (heat) waves travel through space, they leave behind distinctive patterns.Each waves has a distinct size and shape.Wavelength is the separation between peaks (high points).To know more about wavelength visit:
brainly.com/question/13533093
#SPJ4