A sound wave, with an intensity of 50 w/cm2, strikes a boundary and is totally reflected. What is the intensity reflection coefficient (irc)?

A heterogeneous mixture that has very small dispersed particles and stays mixed for a long time is a colloid. A heterogeneous mixture that has larger dispersed particles that settle over time is a suspension.

A heterogeneous suspension is a mixture of components in which the solid particles cannot dissolve into the solution and they can be easily observed, while a colloid consists of macroscopic substances.

Therefore, with this data, we can see that a suspension is any heterogeneous mixture where major solid particles are not mixed.

Learn more about suspension heterogeneous mixtures here:

https://brainly.com/question/8507717

#SPJ1

The net force on the sled is 400 N.

The net force on the sled is the sum of all the forces acting on the sled. In this case, the only forces acting on the sled are the horizontal force of 200 N applied by the athlete and the force of friction acting on the sled.

The force of friction is given by the equation:

F_friction = μ × F_normal

where F_friction is the force of friction, μ is the coefficient of friction between the sled and the surface it is on, and F_normal is the normal force acting on the sled.

The normal force is the force exerted on an object by a surface that is perpendicular to the surface. For an object at rest, the normal force is equal to the weight of the object. In this case, the weight of the sled is 50 kg × 9.8 m/s² = 490 N.

Plugging the values for the coefficient of friction, the normal force, and the applied force into the equation gives us the following:

F_friction = μ × F_normal = μ × 490 N = 200 N

The net force on the sled is the sum of the horizontal force applied by the athlete and the force of friction:

F_net = F_horizontal + F_friction = 200 N + 200 N = 400 N

Therefore, the net force on the sled is 400 N.

Learn more about force at

https://brainly.com/question/20332632?referrer=searchResults

#SPJ4

The primary rationale behind making space travel available to the general public for exploring space includes advancing scientific research, national prestige, unifying nations, ensuring future human survival, and developing military and strategic superiority over other nations.

Since 1960, the main purpose of space travel has been to send humans into outer space. At a cost of at least US$250 (roughly R$1.3 million) per seat, 2021 should be the first year of a suborbital flight with a passenger.

The first advantage of space exploration is knowledge. Thanks to this, people can get much more information about the universe. It's not just about the shape of the Earth or the number of planets in our solar system, it's about understanding the laws and secrets of our universe.

Learn more about purpose of space travel at https://brainly.com/question/27325845

#SPJ4

The time interval during which the speed of the wheel is increasing is 4 s.

The temporal rate at which angular velocity changes is known as angular acceleration. The standard unit of measurement is radians per square second.

The angular velocity at time t = 0, is ω₁ = - 6.00 rad/s.

The angular velocity at time t = 10.0 s, is ω₂ = +4.00 rad/s.

= ( 4.00 - (-6.00))/10 rad/s²

= 1.0 rad/s²

Hence, angular velocity becomes zero at time = ( 0 - ( -6))/1.0 s = 6 s.

So, during t = 0 to t = 6s, the clockwise angular velocity of the wheel decreases from 6.00 rad/s to 0.00 rad/s and  during t = 6s to t = 10s , the counterclockwise angular  velocity of the wheel increases from 0.00 rad/s to +4.00 rad/s.

Hence,  the time interval during which the speed of the wheel is increasing is = 10 s - 6 s = 4 s.

To know more about angular velocity visit:-

https://brainly.com/question/30084436

#SPJ4

The planet with an orbital eccentricity most like the orbital eccentricity of the Moon is Earth. The orbital eccentricity of a celestial body is a measure of how much its orbit deviates from a perfect circle. An orbital eccentricity of 0 represents a perfect circle, while an orbital eccentricity of 1 represents a parabolic orbit.

The orbital eccentricity of the Moon is approximately 0.0549, which is relatively small compared to other celestial bodies. The orbital eccentricity of Earth is also small, with a value of approximately 0.0167. This means that both the Moon and Earth have orbits that are relatively close to being circular.

In contrast, many other planets in the solar system have much larger orbital eccentricities. For example, Mars has an orbital eccentricity of 0.0935, while Mercury has an orbital eccentricity of 0.2056. The largest orbital eccentricity in the solar system belongs to Pluto, which has an orbital eccentricity of 0.2488.

To know more about eccentricity

https://brainly.com/question/28921987

#SPJ4

C. the amount of money in your checking account

The amount of material must also fall to [1%] of its initial amount for the activity of the supplied radioactive isotope to decrease to [1%] of its initial level. As a result, it will take the radioactive isotope [6.645T] years to decay to around [1%] of its original value.

As a result, 50% of the original parent nuclei are still present after one half-life, 25% after two half-lives, etc. The half-life and the initial quantity of radioactive atoms present both affect how much radiation is produced by a radioactive source.

So after 3 half lives, or 6 days, around 12.5% of the total radioactive material will still be present.

To know more about radioactive visit:-

https://brainly.com/question/14825851

#SPJ4

At 3 seconds, the object changes its direction of motion with the equation v = (4.2 m/s) - (1.4 m/s2)t.

The explanation describes the speed of an object and how this speed changes depending on time.

Equation of velocity

V = (4.2 m/s) - (1.4 m/s²)t

When an object changes its direction, it momentarily comes to rest at point B.

V = 0

0 = 4.2 - 1.4 t

t = 4.2 : 1.4 = 3 sec

3 sec after the object changes its direction.

Learn more about objects changing its direction at https://brainly.com/question/29107059

#SPJ4

The distance wheel goes about 1.3m after 5 rotations.

Given data :

radius = 0.26 m

rotation = 5

Distance = 0.26 x 5 = 1.3 m

Learn more about distance refer to :

https://brainly.com/question/26550516

#SPJ1

Observed by you The countryside all surrounding you is just rocks.

The Hadean eon began with the genesis of the planet and ended 4.0 billion years ago; it is the period of time before a trustworthy (fossil) record of life. The first signs of life on Earth and its early evolution appeared during the Archean and Proterozoic eons that followed.

According to him, the fact that bacteria were already so diverse at this time in Earth's history indicates that life may have first appeared on the planet 4 billion years ago. Even more controversial than Schopf's discoveries are those of other researchers, who have discovered evidence of life at least that far back.

To know more about 4 billion years  past visit:-

https://brainly.com/question/14553024

#SPJ4

The power that will be produced by such a force is 12 times the initial power.

Power can be defined as the time rate of doing work. Also power can be defined as the energy expended per unit time.

Mathematically, the formula for power expended by an object is given as;

p = E / t

where;

p = w / t

where;

When a force does six times as much work in half as much time, the power becomes;

p' = (6w) / (¹/₂t)

p' = (2 x 6w) / t

p' = 12w/t

p' = 12 (p)

Learn more about power here: https://brainly.com/question/10590812

#SPJ1

The complete question is below:

a force produces power p by doing work w in a time t what power will be produced by a force that does six times as much work in half as much time?

An object moving at an initial speed of 4.0 meters per second accelerates uniformly at 2.0 meters per second over a distance of 5.0 meters. What is the final speed of the object? Vi=4m/s

After uniformly accelerating in the direction of motion, the object's final speed is 6 m/s.

The final speed of the item is calculated using the third equation of motion. v is the final speed or velocity, a, where u is the initial velocity, an is the acceleration, and s is the distance covered.

The final velocity is 20 m/s.

Initial speed is 16 meters per second.

By changing these values in Equation 1, the equation can be solved.

20² = 16²+2×a×36\s36a = 400-256

36a = 144\sa = 144/36\sa = 4

To learn more about speed please click on below link

https://brainly.com/question/28224010

#SPJ4

When wavelength is expressed in meters, 1/ refers to the amount of waves in a wave train that may be found across a duration of one metre, also known as that of the wavelength range of the spectral line.

What is a wave length?

A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (subsequent crests) in consecutive cycles. This length is typically defined in wireless systems as meters (m), centimeters (cm), or millimeters (mm) (mm).

What is a "wavenumber"?

The word "wave number" describes how many complete electromagnetic (EM) wave cycles are contained within a linear area of one meter (1 m). Reciprocal meters are used to express wave number (m-1)m, the wavelength for.

To know more about wavelength, visit

https://brainly.com/question/23023103

#SPJ4

Settlements can be categorized as either compact, linear, or circular. Based on each area's population density.

Compact Rural Communities:

Rural Linear Settlements:

Circular Rural Communities:

For more information on rural settlements kindly visit to

https://brainly.com/question/1598606

#SPJ4

The height reached by the spring powered cannon is 9.8mh.

PEspring = 1/2 × k × x²

Where k = spring constant

x = amount of compression

The compression of the spring is x = xm

The potential energy stored in the spring is

PE = 1/2 kx²

This potential energy will be converted to kinetic energy when the spring is released and to potential energy of spring powered cannon

KEspring canon powered = 1/2 mu²

Let the height of the powered cannon be = h

The acceleration due to gravity is g = 9.8ms−2

Then ,

PEpowered canon = mgh

Mass of the ball is m =m

PEcanon = m× h × 9.8

PEcanon = 9.8mh.

To know more about potential energy visit:-

https://brainly.com/question/24284560

#SPJ4

Unlike a straight wire where various segments of the wire are at varying distances from a given location, a circular loop has all charges flowing at the same distance from a point on its axis. the magnetic field is concentrated after being spread out in the case of a straight wire.

According to Faraday's Law, when a magnet is moved into a coil of wire, altering the magnetic field and magnetic flux through the coil, a voltage is produced in the coil.

The relationship between the induced magnetic flux density (B) and the magnetizing force is depicted by a hysteresis loop.

To know more about magnetism visit:-

https://brainly.com/question/13026686

#SPJ4

The charge on the 150 nF capacitor is 3200 nF, the charge on the 120 nF capacitor is 3200 nF, the total energy stored in the network is 76.8× 10⁻⁶ J, the energy stored in the 150 nF capacitor is 34.1 × 10⁻⁶ J, the energy stored in the 120 nF capacitor is 42.67 × 10⁻⁶ J.'

When the capacitors are attached in series, the equivalent capacitance is,

C eq = ( 1/C₁ + 1/C₂)⁻¹ = ( 1/150 + 1/120)⁻¹ = 66.67 nF

The charge on each capacitor remains the same because they connected in series. Consequently, each capacitor's charge is,

Q = C V = (66.67 nF) (48 V) = 3200 nC

The charge on the 150 nF capacitor is Q 150 = 3200 nC

The charge on the 120 nF capacitor is Q120 = 3200 nC

The network's overall amount of energy is,

U = Q²/2C = (3200 × 10⁻⁹)²/ (2× 66.67× 10⁻⁹)  = 76.8 × 10⁻⁶ J

The 150 nF capacitor's energy stored is,

U = Q 150²/2C = (3200 × 10⁻⁹)²/ (2× 150× 10⁻⁹) = 34.1 × 10⁻⁶ J

The 120 nF capacitor's energy stored is,

U = Q 120²/2C = (3200 × 10⁻⁹)²/ (2× 120× 10⁻⁹) = 42.67 × 10⁻⁶ J

The question is incomplete. The complete question is 'Find the charge on the 150 nF capacitor.

Find the charge on the 120 nF capacitor.

Find the total energy stored in the network.

Find the energy stored in the 150nF capacitor.

Find the energy stored in the 120nF capacitor.'

To know more about capacitors:

https://brainly.com/question/30076891

#SPJ4

The orange liquid would stay near the top of the lava lamp if the heat did not conduct out of the top of the lava lamp.

Lava lamp - A lava lamp is a decorative lamp, It consists of a bolus of a special coloured wax mixture inside a glass vessel, the remainder of which contains clear or translucent liquid.

The lava lamp contains two liquids with different densities that do not mix and that expand at different rates when heated.

We observe that in the lava lamp experiment, the density of oil is much lower than that of water. Although the water and oil layers separate due to the densities the food couriering has the same density as that of water.

So, If heat did not conduct out of the top of the lava lamp, the orange liquid would stay near the top of the lava lamp

learn more about lava lamp:

https://brainly.com/question/28445319

#SPJ4

The signal amplitude of ECG Mcq is the maximum voltage of the electrical signal produced by the contraction of the heart muscle.
What is amplitude?
Amplitude is the measure of how much energy is contained in a wave. It is defined as the maximum absolute value of the wave, usually measured from the midpoint of the wave. Amplitude is a crucial element of waveform that determines the sound's loudness or intensity of the wave. As the amplitude increases, so does the sound's intensity and vice versa. Amplitude is typically measured in decibels (dB) and is the most important factor when determining the sound level of a wave.
It is measured in millivolts (mV) and is typically between 1 and 10 mV. The higher the amplitude, the better the signal quality.
To know more about amplitude click-
https://brainly.com/question/3613222
#SPJ4


:

The kinetic energy of the charge at point y K.E. = q2E2t2 / 2m is the formula of columb's law.

What is kinetic energy?

Kinetic energy is the energy of motion. It is the energy possessed by an object due to its motion. This type of energy is associated with the movement of particles, atoms and molecules. Kinetic energy is expressed in terms of mass, velocity, and momentum. It can be calculated using the formula KE = ½mv², where m is the mass of the object and v is its velocity. Kinetic energy is associated with a variety of physical phenomena, including sound, light, electricity, and magnetism.

Law of Coulomb

The electrostatic force between two charged items is inversely proportional to the square of the distance between the two objects and directly proportional to the product of their charges.

Electrostatic force,

F = q E

m (dv/dt) = q E

Integrating, we will get,

v = q E t / m + c  

where c= integraing constant.

at t = 0, v = 0, so c = 0

now, v = q E t / m

Therefore,

K.E. =1/2 m v2

K.E. = q2E2t2 / 2m

To learn more about electrostatic force

https://brainly.com/question/20797960

#SPJ4

The wavelength of a muon sub atomic particle is 0.0109474 × 10⁻¹²m.

A periodic wave's wavelength is its spatial period, or the length over which its shape repeats. It is a property of both travelling waves and standing waves, as well as other spatial wave patterns. It is the distance between two successive corresponding locations of the same phase on the wave, such as two neighboring crests, troughs, or zero crossings.  

We are given that ,

Mass = m = 1.884 × 10⁻²⁵g =  1.884 × 10⁻²²kg

Velocity = v = 320.0 m/s

So that to calculate the wavelength of the sub atomic particle we can use the formula,

λ = h/mv

Where , h is the plank's constant having value of 6.6 × 10⁻³⁴Js. Putting these values in above equation we can get,

λ = h/mv

λ = ( 6.6 × 10⁻³⁴Js)/ (1.884 × 10⁻²²kg)(320.0 m/s)

λ = 0.0109474 × 10⁻¹²m

To know more about wavelength

https://brainly.com/question/23455167

#SPJ4

Cyclotron to make 1 milligram of the isotope fluorine-18 for use a a diagnostic tool with it PET scanner. It seems that the hospital should plan to make more F-18 the next morning, as the amount remaining at midnight is very small.

The half-life of F-18 is 1.8 hours, so after 1.8 hours, half of the original amount of F-18 will remain. After 3.6 hours, a quarter of the original amount will remain, and so on.

At 3:00 PM (9 hours after the F-18 was made), the hospital will have

= 1/2^(9/1.8)

= 1/2^5

= 1/32

= approximately 0.03125 milligrams of F-18 remaining.

At midnight (18 hours after the F-18 was made), the hospital will have

= 1/2^(18/1.8)

= 1/2^10

= 1/1024

= approximately 0.0009765625 milligrams of F-18 remaining.

While using cyclotron, based on these calculations, it seems that the hospital should plan to make more F-18 the next morning, as the amount remaining at midnight is very small.

To know more about cyclotron please refer: https://brainly.com/question/13222444

#SPJ4

The toy does not approach the spring. Hence, option (A) is correct.

The force preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction.

Mass of the car-toy: m = 2 kg.

Initial speed of the car-toy: v = 2 m/s.

Distance between the initial position of the car-toy and the spring: d = 3m.

Coefficient of friction: μ = 0.14

Hence, initial kinetic energy of the toy-car = mv²/2 = 2×(2)²/2 Joule = 4 Joule.

Frictional energy loss during approaching from initial position to the spring = μmg·d

= 0.14 × 2 kg × 9.8 m/s² × 3 m

= 8.232 Newton.

As, Frictional energy loss >  initial kinetic energy; the toy does not approach the spring.

Learn more about friction here:

https://brainly.com/question/13000653

#SPJ1

The scientific concept that the student most likely used to arrive at his conclusion is Newton's laws of motion.

Newton's Laws of motion - Newton's Laws of motion consists of 3 important Laws. The three laws of motion help us understand how objects behave when standing still, when moving and when forces act upon them.

according to Newton's 2nd laws:

F = ma (where m is mass and a is acceleration of the object)

the subject applied same force on both the balls, but the ball 2 travelled greater distance.

F = M1a1

M1 = F/a1

and M2 = F/a2

and S = 1/2at2 if initial velocity is 0.

so, S is directly proportional to a

so, M1 = F/S1

and M2 = F/S2

Since, S2 is greater than S1, so M2 is less than M1 because distance is inversely proportional to mass of the object.

learn more about Newton's laws of motion:

https://brainly.com/question/17366362

#SPJ4

The total energy stored in the electric field is U= 5.789*10^(-13)

The energy density u= 0.06548555 J/m³

Electrical energy: The capacitor's total electrical energy (U) is calculated as follows:

U= ½ CV²

The ratio of the charge on a capacitor to its potential is referred to as the capacitor's capacitance. The charge Q has a direct relationship with the electric field in the space between the conductors.Potential often refers to a skill that is still being developed. The phrase refers to things that are in a condition where they have the capacity to change, from the simple release of energy by items to the manifestation of skills in individuals. It is used in a wide range of disciplines, from physics to the social sciences.The quantity of energy that may be held in a system or area of space per unit volume is known as energy density. It is occasionally mistaken with specific energy, also known as gravimetric energy density, or energy per unit mass.The accompanying image has a clear explanation.

To know more about Electrical energy click here brainly.com/question/9178034

#SPJ4

Skyler velocity after throwing the snowball  is 9.34 m/s in forward direction.

A body's velocity is the rate at which its displacement alters with respect to time. A vector quantity with both magnitude and direction is velocity. The meter/second unit of measurement for velocity.

Given that Skyler whose mass is 74.5 kg is moving across at 9.52 m/s while holding a 2.05 kg carefully packed snowball.

forward speed of the snowball = 15.9 m/s.

Let the Skyler velocity after throwing the snowball = v.

According to principle of conservation of momentum;

Total initial momentum = total final momentum

⇒ (74.5 + 2.05)9.52 = 74.5×v + 15.9×2.05

⇒ 74.5×v  = (74.5 + 2.05)9.52  - 15.9×2.05

⇒ v = 9.34 m/s.

Hence, velocity of the Skyler  is 9.34 m/s. in forward direction.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

The  objects collide together where one object is exerting force on the other in equal and opposite magnitude. When they stuck together, their final momentum will be the sum of initial of momentum  of each object. Thus, the final momentum after collision will be 16 kg m/s.

Momentum is a physical quantity which is equal to the  product of mass and velocity of the object. Hence, for a stationary body, the there will be no momentum.

During collision, the total momentum is conserved. Thus, the sum of initial momentum of the colliding objects is equal to the final momentum of the combined mass.

The momentum of object 1 = 12 Kg m/s

object 2 = 4 kg m/s.

Thus, total initial momentum  = final momentum = 12 + 4 = 16 Kg m/s.

Therefore, the final momentum after collision is 16 Kg m/s.

To find more on momentum, refer here:

https://brainly.com/question/24030570

#SPJ1

As the dielectric constant K exceeds 1, the capacitance rises. Possible variation V = CQ. The p.d. between the plates lowers as C rises while Q stays the same when the battery is disconnected.

Electric field E=dV, where d is the distance between the plates and V is the p.d. The electric field also diminishes when V lowers while d stays constant. U=21CQ2 is the energy stored in a capacitor. U declines while Q stays constant and C rises.

As the plates are separated, the distance d between them increases, which causes the capacitance to decrease. As a result, the capacitor's voltage rises as Q=CV in order to keep the charge constant.

To know more about parallel plate capacitor visit:-
https://brainly.com/question/12733413

#SPJ4

The solenoid's circular cross-sectional area has a magnetic flux of 0.0185 voltsec.

The magnetic constant, 0 in the formula, has a value of 4 x 10-7 Hm-1 or 12.57 x 10-7 Hm-1. N and I in the formula stand for the number of turns and the current flowing through the solenoid, respectively.

R = 2 cm for the solenoid's radius

L=20cm,    turns=N=500

turns per unit length = n=1,250turns/meter

current i=15A

Magnetic field through the solenoid = μ0ni=4π×10 −7 ×1250×15units

B=2.356×10−2 H

Outside of the solenoid's turns, the magnetic field is 0 and only exists in the region around r.

Flux=B×πr2 =0.0185voltsec

To know more about Magnetic flux visit:-

https://brainly.com/question/19542022

#SPJ4