Although planets orbit the Sun in ellipses, all the planetary orbits are fairly close to circular and not very eccentric.


True
False

Answer:

xplanation:

Angle of reflection is measured between the incident ray and the angle which it makes with the normal at the point where incident ray strikes the mirror surface.

Further on reflection, it makes the same angle i.e. angle of reflection is equal to angle of reflection.

Hence, as angle of incidence is 55∘ angle of reflection too is 55∘ and the angle between the incident ray and the reflected ray is 55∘+55∘=110∘

Answer:

just search it up you'll get ur answer

Answer:

8 kV

Explanation:

Here is the complete question

Assume a device is designed to obtain a large potential difference by first charging a bank of capacitors connected in parallel and then activating a switch arrangement that in effect disconnects the capacitors from the charging source and from each other and reconnects them all in a series arrangement. The group of charged capacitors is then discharged in series. What is the maximum potential difference that can be obtained in this manner by using ten 500 μF capacitors and an 800−V charging source?

Solution

Since the capacitors are initially connected in parallel, the same voltage of 800 V is applied to each capacitor. The charge on each capacitor Q = CV where C = capacitance = 500 μF and V = voltage = 800 V

So, Q = CV

= 500 × 10⁻⁶ F × 800 V

= 400000 × 10⁻⁶ C

= 0.4 C

Now, when the capacitors are connected in series and the voltage disconnected, the voltage across is capacitor is gotten from Q = CV

V = Q/C

= 0.4 C/500 × 10⁻⁶ F

= 0.0008 × 10⁶ V

= 800 V

The total voltage obtained across the ten capacitors is thus V' = 10V (the voltages are summed up since the capacitors are in series)

= 10 × 800 V

= 8000 V

= 8 kV

Answer:

Potential and kinetic

Explanation:

Answer:

Wind deposits sand into a small mound. So the answer is Deposition

Answer:

increasing the masses of the objects and decreasing the distance between the objects

Explanation:

Answer:

e. Combustion

Explanation:

In Combustion reaction, a substance reacts with oxygen from the air and resultant product is that it releases carbon dioxide and water.

Here,

2C2H6 is the substance that reacted with 7O2 (Oxygen) to release 4CO2 (Carbon Dioxide) and 6H2O (Water).

The force 1 is tension force.

To find the correct statement among all the options, we need to know more about friction, tension, normal force and weight.

Thus, we can conclude that the correct option is (B).

Learn more about tension here:

https://brainly.com/question/2008782

#SPJ2

Chris used a non-plane mirror to check out a box resting on a shelf, the focal length of the mirror is mathematically given as

f=8.38cm

Question Parameter(s):

The image of the box was located 15 cm behind the mirror

and the box was placed 19 cm from the mirror.

Generally, the equation for the focal length is mathematically given as

1/f=1/u+1/v

Therefore

1/f=1/15+1/19

f=8.3823529cm

In conclusion,  the focal length of the mirror

f=8.3823529cm

Read more about Lens

https://brainly.com/question/13161236

#SPJ2

Answer:

sorry I am not confident you the answer

Answer:

11.5 m/s²

Explanation:

The centripetal acceleration, a = rω² where r = radius of cylinder = 10.7 cm = 0.107 m and ω = angular speed = 2πN where N = number of revolutions per second = 1.65 rev/s

So, a = rω²

a = r(2πN)²

a = 4π²rN²

substituting the values of the variables into the equation, we have

a = 4π²rN²

a = 4π²(0.107 m)(1.65 rev/s)²

a = 4π²(0.107 m)(2.7225 rev²/s)²

a = 4π² × 0.2913075 mrev²/s)²

a = 11.5 m/s²

Answer:

a. The wooden cylinder b. the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.

Explanation:

a. Who reaches the bottom first

The kinetic energy of the objects is given by

K = 1/2mv² + 1/2Iω² where m = mass of object, v = velocity of object, I = moment of inertia and ω = angular velocity = v/r where r = radius of object

For the wooden cylinder, I = mr²/2 where m = mass of wooden cylinder and r = radius of wooden cylinder and v = velocity of wooden cylinder

So, its kinetic energy, K = 1/2mv² + 1/2(mr²/2)(v/r)²

K = 1/2mv² + 1/4mv²

K = 3mv²/4

For the steel hoop, I' = mr'² where m' = mass of steel hoop and r' = radius of steel hoop and v' = velocity of steel hoop

So, its kinetic energy, K' = 1/2m'v'² + 1/2(m'r'²)(v'/r')²

K' = 1/2m'v'² + 1/2m'v'²

K' = m'v'²

Since both kinetic energies are the same, since the drop from the same height,

K = K'

3mv²/4 = m'v'²

v²/v'² = 4m/3m'

v²/v'² = 4/3(m/m')

v/v' = √[4/3(m/m')]

Since the hoop weighs more than the cylinder m/m' < 1 and 4/3(m/m') < 4/3 ⇒ √ [4/3(m/m')] < √4/3 ⇒ v/v' < 1.16 ⇒ v'/v > 1/1.16 ⇒ v'/v > 0.866. Since 0.866 < 1, it implies v' < v.

Since v' = speed of steel hoop < v = speed of wooden cylinder, the wooden cylinder reaches the bottom first.

b. Why

Since the kinetic energy, K = translational + rotational

We find the translational kinetic energy of each object.

For the wooden cylinder,

K = K₀ + 1/2Iω² where K₀ = translational kinetic energy of wooden cylinder

K - 1/2Iω² = K₀

3/4mv² - 1/2(mr²/2)(v/r)² = K₀

3/4mv² - 1/4mv² = K₀

K₀ = 1/2mv²

For the steel hoop,

K' = K₁ + 1/2I'ω'² where K₁ = translational kinetic energy of steel hoop

K' - 1/2I'ω'² = K₁

m'v'² - 1/2(m'r'²)(v'/r')² = K₁

m'v'² - 1/2m'v'² = K₁

K₁ = 1/2m'v'²

So, K₀/K₁ =  1/2mv²÷1/2m'v'² = mv²/m'v'² = (m/m')(v²/v'²) = (m/m')4/3(m/m') = 4/3(m/m')².

Since (m/m') < 1 ⇒  (m/m')² < 1 ⇒ 4/3(m/m')² < 4/3 ⇒ K₀/K₁  < 1.33 ⇒ K₀ > K₁

So, the kinetic energy of the wooden cylinder is greater than that of the steel hoop.

So, the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.

a. The wooden cylinder b. the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.

The energy of the body due to its movement in a particular direction under the influence of a force like a free-falling body due to gravitaional force is called  Kinetic energy.

The kinetic energy of the objects is given by

[tex]K = \dfrac{1}{2}mv^2 + \dfrac{1}{2}Iw^2[/tex]

where

m = mass of object,

v = velocity of object,

I = moment of inertia and

ω = angular velocity = v/r where r = radius of object

For the wooden cylinder, I = mr²/2 where m = mass of wooden cylinder and r = radius of wooden cylinder and v = velocity of wooden cylinder

So, its kinetic energy,

[tex]K = \dfrac{1}{2}mv^2 + \dfrac{1}{2}(\dfrac{mr^2}{2})\dfrac{v}{r}^2[/tex]

[tex]K = \dfrac{3mv^2}{4}[/tex]

For the steel hoop,

I' = mr'²

where

m' = mass of steel hoop and

r' = radius of steel hoop and

v' = velocity of steel hoop

So, its kinetic energy,

[tex]K' = \dfrac{1}{2}m'v'^2 + \dfrac{1}{2}(m'r'^2)\dfrac{v'}{r'}^2[/tex]

[tex]K' = \dfrac{1}{2}m'v'^2 + \dfrac{1}{2}m'v'^2[/tex]

K' = m'v'²

Since both kinetic energies are the same, since the drop from the same height,

K = K'

[tex]\dfrac{3mv^2}{4 }= m'v'^2[/tex]

[tex]\dfrac{v^2}{v'^2} =\dfrac{ 4m}{3m'}[/tex]

[tex]\dfrac{v^2}{v'^2} = \dfrac{4}{3}(\dfrac{m}{m'})[/tex]

[tex]\dfrac{v}{v'} = \sqrt{[\dfrac{4}{3}(\dfrac{m}{m'})][/tex]

Since the hoop weighs more than the cylinder m/m' < 1 and 4/3(m/m') < 4/3 ⇒ √ [4/3(m/m')] < √4/3 ⇒ v/v' < 1.16 ⇒ v'/v > 1/1.16 ⇒ v'/v > 0.866. Since 0.866 < 1, it implies v' < v.

Since v' = speed of steel hoop < v = speed of wooden cylinder, the wooden cylinder reaches the bottom first.

(b) Since the kinetic energy, K = translational + rotational

We find the translational kinetic energy of each object.

For the wooden cylinder,

[tex]K = K_o + \dfrac{1}{2}Iw^2[/tex]

where

K₀ = translational kinetic energy of wooden cylinder

[tex]K - \dfrac{1}{2}Iw^2 = K_o[/tex]

[tex]\dfrac{3}{4}mv^2 - \dfrac{1}{2}(\dfrac{mr^2}{2})(\dfrac{v}{r})^2 = K_a[/tex]

[tex]\dfrac{3}{4}mv^2 - \dfrac{1}{4}mv^2 = K_o[/tex]

[tex]K_o = \dfrac{1}{2}mv^2[/tex]

For the steel hoop,

[tex]K' = K_1 + \dfrac{1}{2}I'w'^2[/tex]

where

K₁ = translational kinetic energy of steel hoop

[tex]K' - \dfrac{1}{2}I'w'^2 = K_1[/tex]

[tex]m'v'^2 - \dfrac{1}{2}(m'r'^2)(\dfrac{v'}{r'})^2 = K_1[/tex]

[tex]m'v'^2 - \dfrac{1}{2}m'v'^2 = K_1[/tex]

[tex]K_1= \dfrac{1}{2}m'v'^2[/tex]

So, K₀/K₁ =  1/2mv²÷1/2m'v'² = mv²/m'v'² = (m/m')(v²/v'²) = (m/m')4/3(m/m') = 4/3(m/m')².

Since (m/m') < 1 ⇒  (m/m')² < 1 ⇒ 4/3(m/m')² < 4/3 ⇒ K₀/K₁  < 1.33 ⇒ K₀ > K₁

So, the kinetic energy of the wooden cylinder is greater than that of the steel hoop.

So, the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.

To know more about Kinetic energy follow

https://brainly.com/question/25959744

Answer: 550 cm

Explanation:

Original equation: 1/f= 1/do + 1/di.

F=50.0 cm, and do=55.0.

Since we don't have di, we'll have to subtract do to the other side, making the equation: 1/f - 1/do= 1/di.

Doing the math, 1/f - 1/do is 0.0018181818

Then to get di by itself, you multiply both sides by di. Then you divide by 0.0018181818 to get di by itself. You then get: di= 1/0.0018181818

At that point, you just divide 1 by 0.0018181818, which will give you 550 cm

There could be simpler way, but that is just what I did to get the answer. Answer was right on Acellus

Answer:18 watts

Explanation:i just got this question trust me

\

Answer:The answer is because of the gravity and the mass formed in the sun, the magnetic field reacts to it and leaves a fault on earth. wind goes by the earth and procides to be ok

Explanation:that is it

Answer:

  k y -b [tex]\frac{dy}{dt}[/tex]dy / dt = m [tex]\frac{d^2y}{dt^2}[/tex]

give us some initial conditions

1) friction force fr = 1N when v = 4m / s

2) an initial displacement of x = 0.08 m for t=0 s

Explanation:

In this exercise, you are asked to state the problem you are posing. We are going to find the equation of motion for this exercise. Let's start with Newton's second law

Let's set a reference system with the y-axis in a vertical and positive direction upwards.

We have four forces: an external downward force, negative in sign, the but that goes down and is negative, the Hook force that goes up and is positive and the friction force that opposes the movement, in this case it goes down being negative

let's write Newton's second law

          F_e -F -fr - W = m a

where

          F_e = -kDy = - k y

          fr = - b v = -b dy / dt

          W = mg

we substitute for the specific case, that is, using the signs

          k y  -b [tex]\frac{dy}{dt}[/tex] - m g - F = m [tex]\frac{d^2y}{dt^2}[/tex]

In the initial condition of the problem, before starting the movement, the friction force is zero and the acceleration is also zero

         k y - m g - F = 0

from this equation you can find the spring constant, y= 9m and F=2 N

It is not clear if when the movement starts this external force becomes zero, but since it balances the weight we can eliminate the two forces that have the same magnitude and opposite direction, so the equation remains

              k y - b [tex]\frac{dy}{dt}[/tex]dy / dt = m [tex]\frac{d^2y}{dt^2}[/tex]

give us some initial conditions

1) friction force fr = 1N when v = 4m / s

2) an initial displacement of x = 0.08 m for t=0 s

therefore, to initiate the movement, a small external force F 'is applied that moves the system to a new equilibrium position and this small force F' is made zero, thus initiating an oscillatory movement, described by the equation.

             k y -b [tex]\frac{dy}{dt}[/tex]dy / dt = m [tex]\frac{d^2y}{dt^2}[/tex]

This is a differential equation of the second degree, therefore it needs two initial conditions for its complete solution

The initial amount of displacement corresponds to the amplitude of movement A = 0.08 m

Answer: Kinectic Energy (KE) is equal to half of an object's mass (1/2*m) multiplied by the velocity.

Explanation: If an object with a mass of 10 kg (m=10 kg) is moving at a velocity of 5 meters per second (v=5 m/s), the kinetic energy is equal to 125 Joules, or (1/2* 10 kg) * 5 m/s^2.

Answer:

the magnitude of the magnetic force on the wire is 0.2298 N

Explanation:

Given the data in the question;

we know that, the magnitude of magnetic force is given as;

|F[tex]_{mg}^>[/tex] | = I([tex]B^>[/tex] × [tex]L^>[/tex] )

given that

I = 2.6 A

[tex]B^>[/tex] = 0.17

[tex]L^>[/tex] = 0.52

so we substitute

|F[tex]_{mg}^>[/tex] | = 2.6( 0.17i" × 0.52j" )

|F[tex]_{mg}^>[/tex] | = 0.2298 N

Therefore, the magnitude of the magnetic force on the wire is 0.2298 N

At 30°C, the rms speed of a sample of oxygen with a molar mass of 16 g/mol is approximately 482.34 m/s.

The root mean square (rms) speed of a gas molecule is a measure of the average speed of the gas particles in a sample. It can be calculated using the formula:

vrms = √(3kT/m)

Where:

vrms is the rms speed

k is the Boltzmann constant (1.38 x 10^-23 J/K)

T is the temperature in Kelvin

m is the molar mass of the gas in kilograms

To calculate the rms speed of oxygen at 30°C (303 Kelvin) with a molar mass of 16 g/mol, we need to convert the molar mass to kilograms by dividing it by 1000:

m = 16 g/mol = 0.016 kg/mol

Substituting the values into the formula, we have:

vrms = √((3 * 1.38 x 10^-23 J/K * 303 K) / (0.016 kg/mol))

Calculating this expression yields the rms speed of the oxygen sample:

vrms ≈ 482.34 m/s

For such more questions on speed

https://brainly.com/question/31380575

#SPJ8

Answer:

55.897905

Explanation:

1 Newton in Earth gravity is the equivalent weight of 1/9.80665 kg on Earth

9.80665 times 5.7=55.897905

Brainliest?

When light encounters transparent materials, almost all of it passes directly through them. Glass, for example, is transparent to all visible light. ... Most of the light is either reflected by the object or absorbed and converted to thermal energy. Materials such as wood, stone, and metals are opaque to visible light.

Answer:

The cart mark (a) has the most potential energy and the cart marked (b) has the most kinetic energy

1 mole of nitrogen atoms moving at 35.0 m/s possesses approximately 27.8 joules of energy.

To calculate the energy possessed by 1 mole of nitrogen atoms moving at 35.0 m/s, we need to consider both the kinetic energy and the molecular mass of nitrogen.

The kinetic energy (KE) of an object is given by the equation KE = 1/2 * m * v^2, where m is the mass and v is the velocity.

The molar mass of nitrogen (N₂) is approximately 28.0134 g/mol, which can be converted to kilograms by dividing by Avogadro's number (6.022 × 10^23). This gives us a mass of approximately 4.65 × 10^(-26) kg for one nitrogen atom.

Plugging in the values, we have KE = 1/2 * (4.65 × 10^(-26) kg) * (35.0 m/s)^2.

Evaluating the equation, we find that the kinetic energy possessed by one nitrogen atom is approximately 4.62 × 10^(-23) joules.

Since we are considering 1 mole of nitrogen atoms, we need to multiply this value by Avogadro's number to get the energy possessed by 1 mole. Avogadro's number is 6.022 × 10^23, so the total energy is approximately 2.78 × 10^1 joules, or 27.8 J.

For such more questions on energy

https://brainly.com/question/1634438

#SPJ8

Answer:

The mass of the mercury remaining in the bottle is 497.57 grams.

Explanation:

The mass of the mercury remaining in the bottle is found by subtracting the mass expeled due to heating from initial mass inside the bottle. That is:

[tex]m_{f} = m_{o}-\Delta m[/tex] (1)

Where:

[tex]m_{o}[/tex] - Initial mass, in grams.

[tex]\Delta m[/tex] - Mass expelled due to heating, in grams.

[tex]m_{f}[/tex] - Final mass, in grams.

If we know that [tex]m_{o} = 500\,g[/tex] and [tex]\Delta m = 2.43\,g[/tex], then the mass of the mercury remaining in the bottle is:

[tex]m_{f} = m_{o}-\Delta m[/tex]

[tex]m_{f} = 497.57\,g[/tex]

The mass of the mercury remaining in the bottle is 497.57 grams.

Answer:

1.72 m

Explanation:

Potential energy = mgh, where m is mass, g is acceleration due to gravity (9.8), and h is height

76 = (3.5)(9.8)h

76=44.1h

h=1.72335600907 ≈1.72 m

Answer:

:r

Explanation:r

Tobnbv346468this Ishmael