Answer the following questions. N OR N Would you expect the above compound to be aromatic? © Yes © No Choose the correct explanations for the aromaticity of the compound. Select all that apply. | The lone pairs on the nitrogen atoms do not contribute to aromaticity. The lone pairs on the nitrogen atoms do contribute to aromaticity. The lone pairs on the nitrogen atoms occupy sp2 hybridized orbitals. The lone pairs on the nitrogen atoms occupy sp3 hybridized orbitals. One of the lone pairs on the oxygen atom (inside the ring) occupies a p orbital, giving a continuous system of overlapping p orbitals containing six electrons. One of the lone pairs on the oxygen atom (outside the ring) occupies a p orbital, giving a continuous system of overlapping p orbitals containing six electrons.

Sub is going to be the prefix. The basic building blocks of atoms will be the right response.

It will be smaller than the bigger object in terms of composition. They will thus be smaller than an atom. Atoms are larger than subatomic particles. They are going to be the atom's building blocks. So the fundamental constituents of atoms will be the right response in this case. Protons, neutrons, and electrons—the particles that we know make up atoms—are also referred to as subatomic, of course. Thus, we refer to them as subatomic particles. They are the subatomic particles that go towards the creation of an atom. Okay, so that would be the proper response. that second response choice.

To know more about atom click on the link below:

https://brainly.com/question/17545314

#SPJ4

Here are the six Newman projections of 2,2,5,5-tetramethylhexane:

Lowest energy:

         /C

        /  \

      /C   C\

     /  \ /  \

   C/    C    \C

     \  / \  /

      \C   C/

        \  /

         \C

This conformation is staggered.

         /C

        /  \

      /C   C\

     /  \ /  \

   C/    H    \C

     \  / \  /

      \C   C/

        \  /

         \C

This conformation is eclipsed.

         /C

        /  \

      /C   C\

     /  \ /  \

   C/    H    \H

     \  / \  /

      \C   C/

        \  /

         \C

This conformation is eclipsed.

         /H

        /  \

      /C   C\

     /  \ /  \

   C/    H    \C

     \  / \  /

      \C   C/

        \  /

         \C

This conformation is eclipsed.

         /H

        /  \

      /C   C\

     /  \ /  \

   C/    C    \C

     \  / \  /

      \C   C/

        \  /

         \H

This conformation is staggered.

Highest energy:

         /H

        /  \

      /C   C\

     /  \ /  \

   H/    C    \C

     \  / \  /

      \C   C/

        \  /

         \H

This conformation is eclipsed.

In order from lowest energy to highest, the conformations are: 1, 5, 2, 4, 3, 6.

The three-dimensional structure of a molecule may be better understood with the assistance of a graphic known as a Newman projection.

This projection stares down a carbon-carbon bond the majority of the time, making it a particularly effective approach to depict the stereochemistry of alkanes.

Read more about Newman projections

https://brainly.com/question/24608677

#SPJ1

The oxidation state of an element is calculated by subtracting and the total sum of oxidation states of all the individual atom (excluding the one that has to be calculated) from total charge on the molecule. Therefore, in above given ways we can assign oxidation state.

Oxidation state of an element is a number that is assigned to an element in a molecule that represents the number of electron gained or lost during the formation of that molecule or compound.

a.PO[tex]_4[/tex]³⁻ the oxidation state of P is +5

b. P[tex]_3[/tex]O[tex]_{10}[/tex]⁵⁻the oxidation state of P is +5

c. IO⁻the oxidation state of I is +1

d. NO[tex]_2[/tex]⁻the oxidation state of N is +3

e. N[tex]_2[/tex]O[tex]_2[/tex]²⁻the oxidation state of N is +1

f. PO[tex]_3[/tex]³⁻the oxidation state of P is +3

g. IO[tex]_3[/tex]⁻the oxidation state of I is +5

h. NH[tex]_4[/tex]⁺the oxidation state of N is +3

i. NO⁺the oxidation state of N is +1

j. TeO[tex]_4[/tex]²⁻the oxidation state of Te is +6

k. HPO[tex]_4[/tex]²⁻the oxidation state of P is +5

l. IO[tex]_2[/tex]⁻the oxidation state of I is +3

m. NO[tex]_3[/tex]⁻the oxidation state of N is +5

n. NO[tex]_2[/tex]⁺the oxidation state of N is +5

o. SiO[tex]_3[/tex]²⁻the oxidation state of Si is +4

Therefore, in above given ways we can assign oxidation state.

To learn more about Oxidation state, here:

https://brainly.com/question/11313964

#SPJ4

The following statements correctly describe the effect of molecular polarity  is a) The physical properties of a molecular compound are directly related to molecular polarity.

b) A polar compound will experience stronger intermolecular forces than a non polar compound.

The following statements correctly describe the effect of molecular polarity on the behavior of a molecular compound are :

a) The physical properties of the  compounds is depends on the physical properties of the molecular compound such as the boiling point , the melting point , the solubility etc.

b) The polar compounds will have the stronger force of intermolecular attraction ,  the boiling point of the polar compound is high that's means it has strong intermolecular forces.

To learn more about molecular polarity here

https://brainly.com/question/28085805

#SPJ4

The total number of valence electrons in the lewis structure of AsO₂⁻ is 18. The structure is attached.

We are aware that the valence electron count for As is five, while the valence electron count for oxygen is six. We can also observe that AsO₂ has a negative charge, hence the total number of valence electrons in AsO₂ is equal to the sum of all these electrons.

The total number of e⁻ in AsO₂ = 5 + 2 × 6 + 1

The total number of e⁻ in AsO₂ = 5 + 12 + 1

The total number of e⁻ in AsO₂ = 18

The lewis structure is attached.

You can also learn about valence electrons from the following question:

https://brainly.com/question/28977387

#SPJ4

The angle of insolation has the effect that the more the angle of insolation, the more the amount of heat absorbed by a material.

The impact of the insolation angle on the heat absorption rate of a substance  can be explained by the following factors that affect how much sunlight is absorbed on Earth's surface:

Read more about the Angle of insolation from:

https://brainly.com/question/23582877

#SPJ4

Answer: B and E

Explanation: I just did it

The osmolarity of a 20% NaCl solution is 6.8 osmoles/L.

What is osmolarity?

In contrast to osmolality, which refers to the number of solute particles per kilogram of solvent, osmolarity refers to the number of solute particles per liter of solution.

20 % Sodium chloride:

Convert percent to molarity: 20 gm / 100 ml = 200 gm / L

Sodium is 22.99 g and Chlorine is 35.45 g,

Therefore, the molecular weight of Sodium chloride is 22.99 + 35.45, that is 58.44 grams per mole.

Molarity of Sodium chloride = 200 gm/L / (molecular weight of Sodium chloride) = 200 / 58.44 = 3.4 M

There are 2 osmoles of Sodium chloride per mole, so:

Osmolarity of 20% Sodium chloride = Molarity X 2

osmolarity = 3.4 X 2

osmolarity = 6.8 osmoles/L

Therefore, the osmolarity of a 20% Sodium chloride solution is 6.8 osmoles/L.

To learn more about osmolarity from the given link.

https://brainly.com/question/13895898

#SPJ4

The best Lewis structure for SF₄ is option A. Choose the best Lewis structure for CH₂Cl₂ is B. T structure attached bellow.

The chemical SF₄ stands for sulfur tetraflouride. It contains 34 valence electrons in total and a formal charge of 0.

The molecule has a trigonal bipyramidal electron geometry since the core element is sulfur in an sp³d hybridization state. It has a see-saw chemical shape because it is a molecule of sort AX₄E.

The graphic affixed to this response depicts the molecule's structure.

In the Lewis structure of CH₂Cl₂, eight electrons are shared. The C atom shares two electrons with each of the H and Cl atoms.

Your question is incomplete but most probably your full question was attached below

Learn more about Lewis dot structure here:-brainly.com/question/6605265

#SPJ4

Answer:

Explanation:

The shape of POF3 lewis structure is tetrahedral. The valency of P can extend up to 5. The central atom is connected to 4 atoms that are arranged in a tetrahedral fashion to avoid repulsion among the bonding pairs. There is also a double bond between P and O and 3 single bonds between P and F.

A solid material physically changing into a liquid is called melting. When brought to room temperature, chocolate can simply solidify because it doesn't undergo any chemical changes.

The average distances between the molecules of the chocolate increase as it melts because they spread out more. This is the reason why, after melting, they appear as liquids. Melting is typically thought of as merely a physical transformation. This is so that the chocolate's chemical composition is unaltered.

The transformation of a solid state into a liquid state is referred to as melting. The species involved or their chemical makeup remain unchanged during melting. Melting is therefore a physical characteristic.

To know more about melting visit:-

https://brainly.com/question/15873508

#SPJ4

Conjugate base for each acid of H₃PO₄,HSO  and NH  respectively is H₂PO₄[tex]^-[/tex],SO[tex]^-[/tex],NH₂[tex]^-[/tex].

Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste.Compounds   such as HCl, H₂SO₄ and HNO₃ are acids as they yield H+ ions on dissociation.

According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic  acids  depending on the number of protons which are liberated on dissociation.

Acids are widely used in industries  for  production of fertilizers, detergents batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.

Learn more about acids,here:

https://brainly.com/question/29796621

#SPJ4

Correct answer is :- Chlorine (Cl) element  have more valence electrons than oxygen

The s and p electrons in the outermost shell are valence electrons. Core electrons are those found in the inner shell.

Valence electrons are minuscule subatomic particles that we come across as we examine and investigate an element's atom. We can trace the valence electrons and forecast the sorts of bonds with the aid of Lewis structures.

know more about Lewis structure here

https://brainly.com/question/20300458#

#SPJ4

All the three gases holds equal number of molecules as the size of the containers is equal.

The number of molecules is the product of moles to the Avogadro's number i.e., 6.022*10^23. The size of the containers in which the gases are filled is the same. Since, mole of all gases are equal at STP. Thus, all gases (O2, CO2 and Ne) has the same number of molecules. It is referred to as a mole since it shows the number of particles such as atoms and molecules that are present per mole of a given compound or substance.

Thus, all the three gases holds equal number of molecules as the size of the containers is equal.

To learn more about number of molecules check the link below:

https://brainly.com/question/859564

#SPJ4

Lewis dot structure is a representation of the valence shell electrons in a molecule.

The Lewis dot structure is a very simplified representation of the valence shell electrons in a molecule. It is used to show how the electrons are arranged around individual atoms in a molecule. Electrons are shown as "dots" or for bonding electrons as a line between the two atoms. The goal is to obtain the electron configuration that is the octet rule and formal charges need to be satisfied. No Lewis structure is complete without the formal charges. the formal charges should match the electronegativity of the atom that is negative charges should be on the more electronegative atoms and positive charges on the least electronegative atoms if possible.

To learn more about Lewis structure please visit:

https://brainly.com/question/20300458

#SPJ4

The stretch in each spring is 0.0525 m.

Each spring's spring constant: k=280 N/m

The box's mass: m = 3.00 kg

The weight of a box can be calculated by multiplying it's own mass by gravity's acceleration: (g = 9.8 m/s^2)

The weight of the box is:

        [tex]F_{g} = mg = (3 kg) (9.8 m/s^{2}) = 29.4 N[/tex]

Because they are identical, each spring will facilitate half of the weight of a box, so:

        [tex]F_{\frac{1}{2}} = \frac{29.4 N}{2} = 14.7 N[/tex]

So every spring would then obey Hooke's law, that also gives the spring's extension distance, Δx

based on the spring constant (k) and the force (F) applied to the spring, the equation is : Δx = F/k              

               Δx = 14.7 N/280 N/m

⇒                 = 0.0525 m

As a result, the stretch either in spring is = 0.0525 m.

To know more about the Stretch, here

https://brainly.com/question/29603266

#SPJ4

To draw a parabola graph, we have to first find the vertex for the given equation.

This can be done by using x=-b/2a and y = f(-b/2a). Plotting the graph, when the quadratic equation is given in the form of f(x) = a(x-h)^2 + k, where (h, k) is the vertex of the parabola, is its vertex form.

parabola

A parabola is a plane curve which is mirror-symmetrical and is approximately U-shaped. It fits several superficially different mathematical descriptions, which can all be proved to define exactly the same curves.

Learn more about parabola and graph here :-

https://brainly.com/question/16180199

#SPJ4

The mechanism for the reaction of pent-2-one with methoxide. In all three boxes add lone pair electrons and nonzero formal charges for the given species is attached below in image.

Methoxides are organic salts having a CH3O anion in organic chemistry. These alkoxides are the most basic. Although other metal-cation compounds including lithium, rubidium, and caesium methoxide exist, sodium and potassium methoxide are the most commonly used.

In order to create a poly ether with a high molecular weight, it is utilized as an initiator of an anionic addition polymerization with ethylene oxide. Both sodium methoxide and its potassium-prepared equivalent are routinely employed as catalysts in the synthesis of biodiesel on a large scale.

Thus, The mechanism for the reaction of pent-2-one with methoxide. In all three boxes add lone pair electrons and nonzero formal charges for the given species is attached below in image.

To learn more about methoxide, follow the link;

https://brainly.com/question/13857937

#SPJ4

The value of the mole is equal to the number of atoms in exactly 12 grams of pure carbon-12. 12.00 g C-12 = 1 mol C-12 atoms = [tex]6.02*10^{23}[/tex] atoms.

The mole is a common unit of measurement in chemistry for the amounts of reactants and products in chemical processes. Previously, "mole of molecules" and "mole of atoms" were denoted by the terms gram-molecule and gram-atom, respectively. The quantity of dissolved material per unit volume of solution is known as a solution's molar concentration, and the unit generally used to describe this quantity is moles per litre(mol/L).

The ratio of a sample's mass to the substance's total mass is known as the molar mass of a material. The number of moles in the sample serves as a measure of the substance's quantity.

To learn more about moles of substance, here

https://brainly.com/question/19711232

#SPJ4

As the volume is expanded, it implies that the liquid's liquid particles have characteristics of having vast intermolecular gaps (water). Liquid water has open spaces between its particles, which are not securely connected.

Traditionally, pictures that connect two scenes together are transitioned between using the dissolve editing technique. A dissolve is a progressive change from one image to the next as opposed to a direct cut from one shot to the next.

Water allows substances to dissolve, including salt, sugar, and coffee. These things dissolve. Warm or hot water typically helps them dissolve more quickly and more effectively. Sand and pepper are soluble in hot water, but not at room temperature.

To know more about Dissolved visit:

https://brainly.com/question/2364287

#SPJ4

A molecule of CO2 is a nonpolar molecule, even though the bonds between the carbon atom and the oxygen atoms are polar. This is due to the fact that the two polar bonds in the molecule cancel each other out.

The oxygen atoms in CO2 have a partial negative charge due to their higher electronegativity, while the carbon atom has a partial positive charge. These two polar bonds create a dipole moment in the molecule, but the two dipoles point in opposite directions and thus cancel each other out.

The fact that the two polar bonds cancel out each other is known as “molecular geometry”. This describes how the atoms of a molecule are arranged in space. In the case of CO2, the molecule has a linear arrangement of atoms, meaning that the two oxygen atoms are arranged on opposite sides of the carbon atom. This arrangement creates a symmetrical molecule, where the two dipoles of the polar bonds are facing each other and canceling each other out.

In addition to the cancellation of the dipole moments, the nonpolarity of CO2 is also due to its low polarity. The polarity of a molecule is determined by the difference in electronegativity between the atoms that make up the molecule. In the case of CO2, the difference between the electronegativities of the carbon and oxygen atoms is relatively low, meaning that the resulting molecule is nonpolar.

Learn more about electronegativity at : https://brainly.com/question/17762711

#SPJ4

Answer:

Explanation:

Caffeine has a structure similar to purine. It is made of eight carbon, ten hydrogen, four nitrogen, and two oxygen atoms. Its chemical formula is C8H10N4O2.

A compound is formed while atoms of or extra physical bond collectively chemically changes. For example, desk salt is a chemical compound that effects while atoms of Sodium (Na) bond with atoms of chlorine (Cl).

The residences of an detail do alternate while that detail combines with different factors to shape compounds. There are handiest 118 recognized factors which integrate to make the entirety withinside the universe. If you consider that, you will see that the residences of the detail have to alternate relying upon the compound it's far in.

For example, water is a compound crafted from the factors hydrogen and oxygen. Sugar is likewise a chemical compound which incorporates hydrogen and oxygen, in addition to carbon. The residences of the hydrogen atoms are one of a kind while they're a part of a sugar molecule than while they're a part of a water molecule.

Read more about compound:

https://brainly.com/question/26487468

#SPJ4

The increasing energy order of the quantum numbers is  III < II < I.

To learn more about quantum numbers, refer:

https://brainly.com/question/24095340

#SPJ1

Answer:

There are several disadvantages of using ionic compounds and covalent compounds in domestic settings:

> Ionic compounds are generally less stable and less resistant to changes in temperature and humidity than covalent compounds. This means that they may degrade or decompose over time, leading to reduced effectiveness or even hazards.

> Ionic compounds often have a high melting point and boiling point, making them difficult to handle and store. They may also be sensitive to heat, light, or moisture, which can affect their stability and performance.

> Ionic compounds can be corrosive and toxic, making them potentially harmful to humans and animals. Some ionic compounds, such as bleach and ammonia, can cause respiratory issues and skin irritation.

> Covalent compounds can be expensive to manufacture, as they often require specialized equipment and high temperatures and pressures to synthesize. This can make them less cost-effective for domestic use.

> Covalent compounds may also have a low melting point and boiling point, making them prone to decomposition or evaporation. They may also be flammable or explosive, posing a risk of fire or explosion in domestic settings.

Overall, it is important to carefully consider the properties and potential risks of using ionic and covalent compounds in domestic settings, and to follow safety guidelines and instructions for handling and storing these substances.

The blood buffer has a pH of 7.4, whereas the blood sample has a carbonic acid content of 0.0013 M.

The chemical compound of hydrogen, carbon, and oxygen is known as carbonic acid (H2CO3).It is produced in minute quantities when water dissolves its anhydride, carbon dioxide (CO2). Two covalent double bonds bind the core carbon atom of carbon dioxide, also referred to as carbonic acid gas, to the two oxygen atoms.

pH = pKₐ + log HCO⁻₃/ H₂CO₃

7.4 = - log(4.3 × 10⁻₇)+ log HCO⁻₃/ 0.0013m

log HCO⁻₃/ 0.0013m = 7.4 - 6.37

log HCO⁻₃/ 0.0013m = 1.03

log HCO⁻₃/ 0.0013m = 10¹°⁰³

HCO⁻₃ = 1.3 ₓ 10⁻².

To know more about carbonic acid visit:-

https://brainly.com/question/28175742

#SPJ4

The amount of 38Sr90 produced from a nuclear reactor accident that will take half  lifetime to dissipate is 99.9778%.

The half-life of a reaction is the length of time required for the reactant concentration to decrease to half its initial value. A first-order reaction's half-life is a constant that is correlated with its rate constant: t1/2 = 0.693/k.

A radioactive element's half-life is the amount of time it takes for it to decay to half of its original value. It can be concluded from this that a source's activity has a half-life if it takes some time before it drops to half its starting value.

To know more about half life visit:-

https://brainly.com/question/24710827

#SPJ4

The initial letter of a chemical symbol is usually capitalized; the second letter is always written in lowercase. The first letter of chemical symbols that only contain one letter is always capitalized.

Chemical symbols are used to identify elements and can be one or two letters long. Examples are the chemical symbols O for oxygen, Zn for zinc, and Fe for iron. The first letter of a symbol is typically capitalized. A sign with two letters always has a lowercase letter as the second letter.

The guidelines for drafting chemical formulas are as follows: When writing them, place the symbols with positive charge valency first. Second, note each atom's valency. over its symbol's top. Thirdly, discard the positive or negative radicle and divide the valency number by their highest common factor.

To know more about chemical symbol visit:-

https://brainly.com/question/9249660

#SPJ4

Lewis structure for SeCl2 have 2 lone pairs.

In his idea of cubic atoms, Lewis developed the "octet rule." The preference of atoms to have eight electrons in the valence shell is referred to as the "octet rule." Atoms with fewer than eight electrons have a propensity to interact, resulting in the formation of more stable compounds. The most stable state that atoms can achieve through their reactions. The idea of the octet rule, in which atoms share electrons so that each has eight electrons in its outer shell, is the foundation of a Lewis structure. The outer shell of an oxygen atom, for instance, has six electrons. The valence electrons of atoms within a molecule are depicted in diagrams known as Lewis structures, commonly referred to as Lewis dots or electron dot structures.

Learn more about Lewis structure here:

https://brainly.com/question/4144781

#SPJ4

The expected major product for the reaction you have provided is "OH + enantiomer + enantiomer."

Hg(OAc)2 acts as a catalyst in this reaction, promoting the reduction of the aldehyde or ketone using NaBH4 as the reducing agent. The product of the reduction will be alcohol, and the enantiomer refers to the fact that the product will be chiral (meaning it will have a non-superimposable mirror image) and of a particular enantiomer (one of the two non-superimposable mirror images).

The addition of NaOH neutralizes the reaction's acid and dissolves the result, making it easier to separate. It is not likely to have a substantial impact on the reduction's product.

Learn more Chemical reactions here: https://brainly.com/question/25769000

#SPJ4