Can someone help me , explain too it’s special right triangles

When asked to find the sum of two mixed numbers with different denominators, you should find a (C) common denominator before you add.

To add fractions with different denominators, it is necessary to find a common denominator for both fractions. Once the fractions have the same denominator, you can add or subtract the numerators while keeping the denominator unchanged. This allows for a meaningful addition of the fractions.

To find a common denominator, you need to determine the least common multiple (LCM) of the denominators. The LCM is the smallest multiple that both denominators can divide evenly into. Once you have the common denominator, you can convert each fraction to an equivalent fraction with that denominator and then perform the addition.

After finding the common denominator, you add the numerators of the fractions and keep the common denominator. This will give you the sum of the two mixed numbers with different denominators. The correct answer is C. find a common denominator.

To know more about mixed numbers click here:

https://brainly.com/question/28994473

#SPJ2

Answer:

d = 1000 is the correct answer to that question

Answer:

d=4

Step-by-step explanation:

10^d=10000

Solve Exponent.

10d=10000

log(10d)=log(10000) (Take log of both sides)

d*(log(10))=log(10000)

d=

log(10000)

log(10)

d=4

Hope this helps :)

Answer: D.0

Step-by-step explanation:  i know am right, make me brainliest

Answer:

0.15

Step-by-step explanation:

Brainliest?

Answer:

If a bag of candy costs $3.75 and the sales tax was 4% of the cost, then the amount of tax you would be charged is $.15

Step-by-step explanation:

4% = 0.04

0.04 * 3.75=.15

$.15

hope this helped :)

Answer:

-3

Step-by-step explanation:

2·3-9

6-9 = -3

Answer:

646.0 cm^3

Step-by-step explanation:

The volume of this cube with side length 8 cm is (8 cm)^3, or 512 cm^3.

The volume of the hemisphere (half sphere) is

V = (1/2)(4/3)(pi)(4 cm)^3                     (since half of the diameter, 8 cm,

V = (2/3)(3.14)(64 cm^3), or                   is the radius)

V = 133.86 cm^3, or approximately 133.9 cm^3.

The volume of the entire solid is (512 + 133.9) cm^3, or 646.0 cm^3

Her profit would amount to $4564.24 for one month which is determined by subtracting her total expenses from made revenue.

Arithmetic operations can also be specified by subtracting, dividing, and multiplying built-in functions. The operator that performs the arithmetic operation is called the arithmetic operator.

- Subtraction operation: Subtracts the right-hand operand from the left-hand operand.

for example 12 -2 = 10

For the month, she made a revenue of $11,449.27.

To calculate her profit, we have to subtract her total expenses from made revenue.

Her expenses were $230.21 for utilities, $2,679.82 for rent, and $3,975.00 for employee salaries which are given in the question.

Total expenses = 230.21 + 2,679.82 + 3,975.00 = 6885.03

As per the given data, the solution would be:

⇒ Total revenue - Total expenses

⇒ 11,449.27 - 11,449.27

Apply the subtraction operation, and we get

⇒ 4564.24

Therefore, her profit would amount to $4564.24 for one month.

Learn more about Arithmetic operations here:

brainly.com/question/25834626

#SPJ2

Answer:

(0, 0)

Step-by-step explanation:

x = 8 - 8 = 0

y-value remains the same.

Answer: You would move to the origin (0,0)

Step-by-step explanation:

This is because when you move in teh direction of left or right you would utilize the x-axis. Thus, moving over to the left 8 units would lead you to the origin or in other words (0,0).

Answer:

Step-by-step explanation:

To show that the function Φ (Phi) is onto and one-to-one, we need to establish two properties:

Onto (Surjective):

For a function to be onto, every element in the range must have a preimage in the domain. In other words, for every y in the range, there must exist an x in the domain such that Φ(x) = y.

One-to-one (Injective):

For a function to be one-to-one, distinct elements in the domain must map to distinct elements in the range. In other words, if Φ(x₁) = Φ(x₂), then x₁ = x₂ Let's proceed to show both properties:

Onto (Surjective):

To show that Φ is onto, we need to demonstrate that for every y in the range of Φ, there exists an x in the domain such that Φ(x) = y.

Assuming that Φ(x) = y, we want to find the preimage x in the domain. However, you didn't provide the specific definition or context of the function Φ. Please provide the definition or specify the nature of the function Φ so that I can continue with the proof.

One-to-one (Injective):

To show that Φ is one-to-one, we need to prove that if Φ(x₁) = Φ(x₂), then x₁ = x₂ for any x₁ and x₂ in the domain.

Again, without the specific definition or context of the function Φ, I cannot proceed with the proof for the one-to-one property. Please provide the necessary information, and I'll be happy to help you further.

Learn more about function here:

https://brainly.com/question/11624077

#SPJ11

Thus, h is not continuous on an uncountably infinite set.

(a) The function h(x) is defined as: h(x) = 1 if x is an element of the set C h(x) = 0 if x is not an element of the set C. The function h has discontinuities at each point of C and is continuous at every point of the complement of C.

Therefore, by the Lebesgue integrability criterion, h is integrable on (0, 1).

(b) Now we have to prove that h is integrable on (0,1). Let C be a countably infinite set, and let E = (0, 1) \ C be the complement of C in (0, 1). Since h is continuous on E, we know that h is integrable on E. Also, h is bounded on (0, 1), since it takes values in the closed interval [0, 1]. Therefore, by the Lebesgue integrability criterion, h is integrable on (0, 1)..The function h(x) is defined as: h(x) = 1 if x is an element of the set C h(x) = 0 if x is not an element of the set C. The function h has discontinuities at each point of C and is continuous at every point of the complement of C. Thus, h is not continuous on an uncountably infinite set.Since h is continuous on E, we know that h is integrable on E. Also, h is bounded on (0, 1), since it takes values in the closed interval [0, 1].

Know more about Lebesgue integrability criterion here:

https://brainly.com/question/32558180

#SPJ11

Answer:

x = -1,3 I think

I put it into math day look it up

Answer:

It’s B

Step-by-step explanation:

I did this before and it’s B good luck

Answer:

The last option is correct

Total combinations = each item x each item:

3 breads x 5 cheese x 6 filling = 90 different combinations

Answer:

a) CI ( 99% )  = ( 145,45 : 162,55)

b) b) In order to decrease the MOE the sales team has to increase the sample or decrease de 99% of the CI  let´s say to 95 % but in that case

you will increase de error type I

Step-by-step explanation:

a) CI = 99 %       α = 1%   α = 0,01

From z-table     z(c)  ≈ - 2,325    |z(c)| ≈ 2,325

CI = ( μ₀ ± z(c) * σ/√n )

CI = ( 154 - (2,325) * 26/√50 ; 154 + (2,325) * 26/√50 )

CI = ( 154 -  8,55  ;  154 + 8,55

CI ( 99% )  = ( 145,45 : 162,55)

b) In order to decrease the MOE the sales team has to increase the sample or decrease de 99% of the CI  let´s say to 95 % but in that case

you will increase de error type I

Answer:

DTI ratio in percentage = 30.29%

Step-by-step explanation:

Annual salary = $85,063

This means that gross monthly pay = 85063/12 = $7088.58

Now,

Total monthly debt payments = 1555 + 274 + 139 + 179 = $2147

Debt to income ratio = (2147/7088.58) × 100% = 30.29%

Answer:

A) y = 2x + 3

Step-by-step explanation:

when x is 2 and y is 7:

y = 2(2) + 3

y = 4 + 3

y = 7

This goes for the other values as well

Answer I think it is A

Step-by-step explanation:  

2 x 2 = 4 + 3 = 7

2 x 3 = 6 + 3 = 9

2 x 4 = 8 + 3 = 11

Answer:

I can't read it

Step-by-step explanation:

Hi there!

[tex]\large\boxed{f(5) = 17}}[/tex]

f(x) = 3x + 2, find f(5):

To find f(5), we simply substitute in 5 for x:

f(5) = 3(5) + 2

f(5) = 15 + 2

f(5) = 17

Answer:

7x^5 +6

Step-by-step explanation:

Given the differential equation governing the motion of a block attached to a damped spring: x¨+x˙+x=0; a > 0, b > 0.To check if the equilibrium y is globally asymptotically stable or not, we will analyze the differential equation in detail. In the differential equation, x is the displacement of the block from the equilibrium position. When the block is at the equilibrium position, the displacement is zero. The equilibrium solution is x = 0.x¨ + x˙ + x = 0 represents a linear homogeneous differential equation of the second order with constant coefficients. The characteristic equation is r² + r + 1 = 0.

Let's solve the above characteristic equation: r² + r + 1 = 0r = (-b ± sqrt(b² - 4ac))/2a= (-1 ± sqrt(-3))/2As a > 0 and b > 0, r has negative real part. This means the solution of the differential equation is exponentially stable, which means that the system is asymptotically stable. Thus, the equilibrium y is globally asymptotically stable. Hence, the correct option is: a) yes.

To know more about equilibrium, click here:

https://brainly.com/question/30694482

#SPJ11

Answer:

-12/35

Step-by-step explanation:

-3×4/5×7

-12/35

Answer:

B

Step-by-step explanation:

[tex]\sqrt{9}[/tex] = 3

3[tex]\pi[/tex] = 9.42477

-2.4 = -2.4

-5 = -5

20% = 0.20

Answer:

1/6

Since there are 6 faces and you're asking if 1 face is the probability, the probability is 1/6

Answer:

Venn is the circles and the tree is the green one (ignore the other thing on tree)

Answer: 62 hours per month

Step-by-step explanation:

If Y is a subset of Z and Z is bounded in (X, d), then Y is bounded and the diameter of Y is less than the diameter of Z, and Assuming Y and Z are subsets of (X, d) and both are bounded, the diameter of the union of Y and Z, denoted as Y U Z, is less than the sum of the diameters of Y and Z. If Y is a subset of (X, d) and Y is bounded, the above statements still hold.

(a) If Y is a subset of Z and Z is bounded in (X, d), then Y is bounded and the diameter of Y is less than the diameter of Z.

To show that Y is bounded, we consider that Z is bounded, which means there exists a positive real number M such that for any two points z1 and z2 in Z, the distance between them, d(z1, z2), is less than or equal to M. Since Y is a subset of Z, every point in Y is also a point in Z. Therefore, the distance between any two points in Y, which is a subset of Z, is also less than or equal to M. Thus, Y is bounded.

Now, let's compare the diameters of Y and Z. The diameter of a set is defined as the supremum (least upper bound) of the distances between all pairs of points in the set. Since Y is a subset of Z, the distances between any two points in Y will also be distances between points in Z. Therefore, the diameter of Y cannot exceed the diameter of Z. In other words, diam Y < diam Z.

(b) Assuming Y and Z are subsets of (X, d) and both are bounded, we can show that the diameter of the union of Y and Z, denoted as Y U Z, is less than the sum of the diameters of Y and Z.

To prove this, let's consider two points p1 and p2 in Y U Z. These points can either both belong to Y or both belong to Z, or one point belongs to Y and the other belongs to Z. In any case, the distance between p1 and p2 will be either within Y or within Z, or it will be the sum of distances within Y and Z. In all scenarios, the distance between p1 and p2 will be less than or equal to the sum of the diameters of Y and Z.

Therefore, diam(Y U Z) < diam Y + diam Z.

(c) If Y is a subset of (X, d) and Y is bounded, the above statements still hold. The arguments presented in parts (a) and (b) remain valid regardless of the specific properties of Y as long as it is a subset of the metric space (X, d) and bounded.

To learn more about Unions, visit:

https://brainly.com/question/29870206

#SPJ11