EASY QUESTION IM GIVING BRAINLIEST!!
20 PTS

The magnitude of the normal force acting on the vehicle in mars is 2,220 N

The mass of the vehicle = 600 kg

The speed at which the space vehicle travels = 4.8 m/s

The gravitational field strength = 3.7 N/kg

The magnitude of the force acting on the vehicle can be found using the formula,

                  F = mg

where F is the force acting on the vehicle

          m is the mass of the vehicle

          g is the gravitational strength.

Let us substitute the known values in the above equation, we get

               F = 600 x 3.7

                  = 2,220 N

Therefore, the force acting on the vehicle is 2,220 N

Learn more about the gravitational field strength in

https://brainly.com/question/18511078

#SPJ4

Answer: electrostatic force

Explanation:

electrostatic forces pull or push on objects without touching them, which is how when you rub some materials together they can result in something called a 'charge', being moved from point A to point B.

The only true statement about the toy car is " the toy does not approach the spring".

option A is the correct answer.

The acceleration of the car is calculated by applying Newton's second law of motion, which states that the force applied to an object is directly proportional to the product of mass and acceleration of the object.

F - Ff = 0

F = Ff

ma = μmg

a = μg

where;

a = 0.14 x 9.8 m/s².

a = 1.37 m/s²

The distance traveled by the car before stopping is calculated as follows;

v² = u² - 2as

where;

when the car stop's the final velocity, v = 0

0 = u² - 2as

2as = u²

s = u²/2a

s = ( 2² ) / ( 2 x 1.37 )

s = 1.5 m

Thus, the final distance travelled by the car is less than 3 m, hence the car did not come in contact with spring.

Learn more about distance travelled here: https://brainly.com/question/24283318

#SPJ1

Violet electromagnetic radiation- The wavelength is 400 nm. Red electromagnetic radiation- The wavelength is 750 nm. Infrared electromagnetic radiation- The wavelength is 1000 nm.

Although they are made using various techniques and are discovered in various ways, they are not essentially distinct from one another.Electromagnetic radiation includes radio waves, gamma rays, visible light, and all other components of the electromagnetic spectrum.

These include microwaves, X-rays, gamma rays, infrared waves, radio waves, visible rays, and infrared, X-ray, and microwave waves.Gamma rays have the smallest wavelength as well as the shortest frequency of the seven electromagnetic waves, while radio waves have had the longest wavelength as well as the longest frequency.

To know more about wavelengths visit:

https://brainly.com/question/13533093

#SPJ4

Answer:

The problems discussed in the meeting of the Gram Sabha are: (i) Construction and maintenance of village roads and waterways, constructions of culverts on them and planting of trees, maintenance and repair of public wells, tanks and pits

Explanation:

Piping water from the Suru river and making an overhead tank in the villages.

(ii) Deepening the handpumps and cleaning the wells.

(iii) Conserving water and recharging it.

(iv) Name of Om Prakash should be in the BPL list.

Accordingly, the response at A in a vertical direction weight is   W(2cosϕsinθ−sinϕcosθ)/2sin(θ−ϕ).

If you hang the wire from the ceiling while placing a weight on the lower end, it will sag. By dividing the length change by the starting length, the strain in the wire may be computed. By dividing the weight suspended from the wire by its cross-sectional area, the tensile tension in the wire is determined. Stress and strain have a defined ratio.

Modulus is a fundamental characteristic of industrial yarn and thread for wire and cable, especially aramid yarns (fiber elasticity). The relationship between strain (the ratio of deformation over initial length along an axis) and stress (force per unit area along that axis) is referred to as modulus.

In conclusion, cross-linking improved elastic modulus, decreased strain to failure, and had negligible effect on collagen fracture stress in the current experimental design.

The questions is incomplete I answered it in general way

The uniform beam has a weight W and length l and is supported by a pin at A and a cable BC. (Figure 1) Determine the horizontal and vertical components of reaction at A. Express your answers in terms of some or all of the variables W, l, phi and theta. Enter your answers separated by a comma.

To know more about weight

https://brainly.com/question/29255653

#SPJ4

Based on the given diagram that contains four items with a predefined mass, it is stated that the four items which are: sponge, glass, eraser and steel are submerged in water for 30 minutes, when they are all brough out, the item that would likely have an increase in weight is the sponge.

This refers to the term that is used to describe and define the force exerted by gravity on an object. The gravitational force acting on the item is referred to as weight in several common textbooks. Some people refer to weight as a scalar quantity that measures the gravitational force's strength.

Hence, it can be seen that a sponge is a foamy material that absorbs water, unlike the other materials and this is the material that would feature an increase in weight after being submerged in water for 30 minutes.

Read more about weights here:

https://brainly.com/question/2337612
#SPJ1

(a) The work done by the shot-putter is 313.6 J.

(b) The force exerted by the shot-putter is 627.2 N.

(c) The power used by the shot putter is 7024.6 Watt.

The work done by the shot-putter is equal to the change in the kinetic energy of the shot-put.

W = ΔK.E

W = ¹/₂m(v² - u²)

where;

W = ¹/₂m(v² - 0)

W = ¹/₂mv²

W = ¹/₂(5)(11.2)²

W = 313.6 J

The force exerted by the shot-putter is calculated as follows;

W = Fd

where;

F = W / d

F = ( 313.6 J ) / (0.5 m)

F = 627.2 N

The power used by the shot putter is calculated as follows;

P = Fv

P = (627.2 N) x (11.2 m/s)

P = 7,024.6 Watt

Learn more about work done here: https://brainly.com/question/25816840

#SPJ1

magnitude of the induced current        

where  I = 0.5A

 Briefing

Knowing that the formula for magnetic flux is = NBA

Here, N is the number of turns,

B is the magnetic field,

and A is the area of the loop.

Knowing that the coil's EMF will be induced by the rate of change in magnetic flux,

we may calculate it as EMF = NA db/dt.

To find the induced EMF,

we now plug in all values.EMF = 0.2

voltageTherefore, according to Ohm's rule,

Current = EMF/Resistance I = 0.2/0.40.

Visit this link to learn more about the Magnetic field:  

https://brainly.com/question/23096032

#SPJ4

The capacity plate tells us about the maximum load or the maximum number  of people that can be carried by a vehicle.

In boats, the maximum load is measured by the capacity plate Quizlet. The maximum load for a particular region is issued by the authority of that region, which is strictly mandatory to follow. Any violation can lead to strict punishment. Load limit can be calculated by subtracting curb weight from GVWR.

Load limit= GVWR- curb weight

By staying within the load limit one can increase the life of a vehicle also. It is also for human safety purposes.

Learn more about load limit:

https://brainly.com/question/14747975

#SPJ4

Voltmeters are typically connected in parallel because they have high resistance, while ammeters are typically connected in series to measure current since they have low resistance and the voltage drop would be minimal.

For more information on ammeter kindly visit to

https://brainly.com/question/18404570

#SPJ4

The incentive theory says people are "pulled" by external stimuli to act a certain way.

Humans have both main and secondary needs that must be met in order for them to feel needed. These requirements naturally nudge a person in that direction. Hunger, thirst, and a desire for sexual activity are examples of fundamental wants. Secondary needs, on the other hand, are those that depend on advantages, with financial requirements serving as the finest illustration.

According to incentive theories, conduct is driven by the "pull" of external objectives like rewards, money, or recognition. It's simple to imagine a variety of circumstances in which a specific objective, like a job promotion, can act as an outside incentive to encourage certain actions.

To know more about incentive theory

https://brainly.com/question/29672711

#SPJ4

When an object is moved by a force at a constant speed over a rough, horizontal surface, the work against friction results in an increase in the object's

(1) Momentum (2) (2) Powerful potential (3) Translational Kinetic power (4) internal drive 4. The kinetic energy of a runner weighing 60.0 kg is 1920 joules. How fast is she running? Kinetic Power According to classical physics, kinetic energy (KE) is determined by multiplying the mass of an item by the square of its velocity, or 1/2*m. For instance, the kinetic energy of a mass of 10 kg traveling at a speed of 5 meters per second (v = 5 m/s) is equal to 125 joules, or (1/2 * 10 kg) * 5 m/s 2.

To learn more about kinetic energy please click on below link

https://brainly.com/question/26472013

#SPJ4

When the ice skater pulls her arms in close to her body, her angular momentum remains the same because it is a conserved quantity. When the ice skater pulls her arms in, her moment of inertia decreases. When the ice skater pulls her arms in, her angular speed increases. When the ice skater pulls her arms in, her rotational kinetic energy increases.

When the ice skater pulls her arms in close to her body, her angular momentum remains the same because it is a conserved quantity. Angular momentum is defined as the product of the moment of inertia and the angular velocity of an object, and it is conserved as long as there is no external torque acting on the object. In this case, since the ice skater is not being acted upon by an external torque, her angular momentum will not change when she pulls her arms in.

When the ice skater pulls her arms in, her moment of inertia decreases. The moment of inertia of an object is a measure of its resistance to changes in its rotational motion, and it is directly proportional to the mass of the object and the distance of the mass from the axis of rotation. When the ice skater pulls her arms in, she reduces the distance of her mass from the axis of rotation, which decreases her moment of inertia.

When the ice skater pulls her arms in, her angular speed increases. This is because the decrease in her moment of inertia leads to an increase in her angular velocity, according to the equation:

ω = L / I

where ω is the angular velocity, L is the angular momentum, and I is the moment of inertia.

When the ice skater pulls her arms in, her rotational kinetic energy increases. This is because the rotational kinetic energy of an object is directly proportional to its moment of inertia and its angular velocity squared, according to the equation:

Krot = (1/2) * I * ω^2

Therefore, when the ice skater's moment of inertia decreases and her angular velocity increases, her rotational kinetic energy will also increase.

To know more about inertia

https://brainly.com/question/3268780

#SPJ4

The threshold voltages for NMOS transistors in the 180 nm technology are Vth,r = 0.592 V and Vth,n = 0.068 V.

Leading semiconductor firms, first with TSMC and Fujitsu, then Sony, Toshiba, Intel, AMD, Texas Instruments, and IBM, commercialized the 180 nm process, a MOSFET (CMOS) semiconductor process technology, between 1998 and 2000.

The Threshold voltage at which a sizable current begins to flow from the source to the drain is referred to as the threshold voltage.

A thin inversion layer that separates the insulating from the real body of a transistor is typically used to build a threshold voltage. The region's surface is covered with tiny holes that are positively charged, and when electricity is applied, the particles in these spaces are repelled.

To learn more about threshold voltage from given link

https://brainly.com/question/3157069

#SPJ4

Right-left = ma, 5-friction=0 ,friction = 5,Work Net = change of kinetic energy,Fx-fx= change of kinetic energy,12 (2) - 5 (2) = change of kinetic energy,24-10 = change of kinetic energy.

When a baseball is thrown at such an angle and is traveling upward, its kinetic energy will decrease because gravity is working against the ball's motion to slow it down and change it from kinetic energy to potential energy.

Because the author's kinetic energy does not change when it is brought to the table, the total mechanical force remains constant.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ4

From of the longest infrared light through the visible light spectrum to a shortest ultraviolet rays, thermal radiation spans the entire electromagnetic spectrum.

In increasing frequency and decreasing wavelength order, radio waves, microwave, infrared, visible light, ultraviolet radiation, X-rays, gamma rays, and cosmic rays make up the full electromagnetic spectrum.

Thermal radiation is the process of transferring heat through electromagnetic radiation that is produced by thermal motion of matter particles.This electromagnetic radiation is located in the infrared portion of the spectrum, which is invisible to most Earthly bodies.

To know more about  thermal radiation visit:

https://brainly.com/question/24200572

#SPJ4

A genetic disease is an example, such as sickle cell anemia. The organelles that house our genes are called chromosomes. Chromosome disorders include Down syndrome.

A genetic disorder is a condition that is wholly or partially brought on by a deviation from the typical DNA sequence.

Genetic illnesses result from changes or anomalies in an organism's genome. A gene mutation can affect one or more genes, leading to a genetic disorder. Changes in chromosomal structure or number may also be to blame. Genes are the basic unit of heredity.

To know more about genetic diseases visit:-

https://brainly.com/question/8061328

#SPJ4

Work done by friction and air resistance -780,000 Joules. Since the work done by the combined forces of friction and air resistance is negative, this means that these forces are doing negative work on the car, which means that they are slowing the car down.

The work done on the car by the force propelling it up the mountain road is given by W = Fd, where F is the force and d is the distance over which the force is applied. Since the force is nonconservative, the work it does on the car is not equal to the change in the car's kinetic energy. Instead, the work done by the force propelling the car is equal to the change in the car's potential energy plus the work done by the nonconservative forces of friction and air resistance.

To find the work done by the combined forces of friction and air resistance, we can use the following equation:

Work done by friction and air resistance = change in kinetic energy - change in potential energy

We can find the change in the car's kinetic energy by subtracting its initial kinetic energy (0 Joules, since it starts from rest) from its final kinetic energy. The final kinetic energy of the car is given by

[tex]KE = \frac{1}{2} mv^2[/tex]

where m is the mass of the car and v is its speed. Plugging in the values, we get:

[tex]KE = (1/2)(1.50 * 103 kg)(27.0 m/s)^2 = 2.16 * 105[/tex] joule

The change in the car's potential energy can be found by subtracting its initial potential energy (which is 0 Joules at sea level) from its final potential energy. The final potential energy of the car is given by

PE = mgh,

where m is the mass of the car, g is the acceleration due to gravity, and h is the height of the car above the ground. Plugging in the values, we get:

PE = (1.50 x 103 kg)(9.8 m/s²)(2.00 x 102 m) = 2.94 x 105 Joules

Substituting these values into the equation above, we get:

Work done by friction and air resistance = (2.16 x 105 Joules) - (2.94 x 105 Joules) = -780,000 Joules

Learn more about work done, here https://brainly.com/question/13662169

#SPJ4

Answer:

3*3-४3*74-7%**&-*%३;9८32&*7५३३6

Energy (E) is related to wavelength (λ) and frequency (ν) according to the equation E=hν, where h is Planck’s constant (6.626 × 10-34 J-s).

Wavelength is the distance between two successive peaks or troughs of a wave, such as light, sound, or other forms of energy. It is measured in meters or nanometers and is related to the frequency of the wave, as the frequency is inversely proportional to the wavelength. Wavelength can also be used to describe the physical size of an object, such as a particle or cell.
The equation for calculating wavelength (λ) is λ=c/ν, where c is the speed of light (3.0 × 10⁸ m/s). The equation for calculating frequency (ν) is ν=c/λ. Therefore, the formulas for calculating energy wavelength and frequency are:
Energy (E) = hν
Wavelength (λ) = c/ν
Frequency (ν) = c/λ
To know more about wavelentgh click-
https://brainly.com/question/10750459
#SPJ4

The maximum amount of weight that we can load on a vehicle is known as maximum loading capacity.

The maximum loading capacity of any vehicle can be define as that maximum value of the weight of the body that we can load on the vehicle without damaging any part of the vehicle.

The maximum loading capacity of the vehicle is decided by doing certain experiments and observation by the makers and the manufacturers of the parts of the vehicle.

To avoid accidents and unfortunate events the maximum loading capacity is always higher than the prescribed limit of weight for the vehicle.

To know more about loading capacity, visit,

https://brainly.com/question/14645317

#SPJ4

The separation of the plates in this parallel-plate capacitor is approximately 6.49 micrometers.

The separation of the plates in a parallel-plate capacitor can be calculated using the equation:

d = ε0 * ∆V/σ

where d is the separation of the plates, ε0 is the electric constant (also known as the permittivity of free space), ∆V is the potential difference between the plates, and σ is the surface charge density on the plates.

In this case, the potential difference between the plates is given as v = 6.0 V, and the surface charge density on the plates is given as σ = 7.0 nC/m^2. Plugging these values into the equation above, we get:

d = (8.85 x 10^-12 C^2/N*m^2) * (6.0 V) / (7.0 nC/m^2)

This simplifies to:

d = 6.49 x 10^-6 m

To know more about capacitance

https://brainly.com/question/14746225

#SPJ4

The sign of q, or the heat transfer, for the process of compressing the air in a bicycle pump, is positive. This means that heat is being transferred into the system, in this case, the air in the pump.

When a gas is compressed, the molecules collide more frequently and with greater force, which increases the temperature of the gas. This increase in temperature is due to the transfer of heat from the surroundings (in this case, the body of the pump) into the gas.

The sign of q can be determined using the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.

If heat is added to the system, q is positive, and if heat is removed from the system, q is negative. In the case of compressing the air in a bicycle pump, the internal energy of the system (the air in the pump) increases, which means that q is positive.

Learn more about the air at

https://brainly.com/question/17551490?referrer=searchResults

#SPJ4

The question is -

You may have noticed that when you compress the air in a bicycle pump, the body of the pump gets warmer. What is the sign of q for this process?

Frequency, in physics, the number of waves that pass fixed point in unit time; also, the number of cycles or vibrations undergone during one unit of time by a body in periodic motion.

What is frequency?

To know more about frequency, click the link given below:

https://brainly.com/question/30053506

#SPJ4

The angle the road should be banked is determined as 2⁰.

The banking angle of the road is calculated by applying the following equation.

tan ( θ ) = v² / rg

where;

The given parameters includes;

radius of the road = 2.3 km = 2,300 m

speed rating of the road = 100 km/hr = 27.78 m/s

tan ( θ ) = v² / rg

tan ( θ ) = (27.78)² / (2,300 x 9.8)

tan ( θ ) = 0.034

θ = arc tan (0.034)

θ = 2⁰

Learn more about banking angle here: https://brainly.com/question/8169892

#SPJ1

The tension in the cord is 39.2 N.

The tension in the cord used in pulling down the solid wooden sphere  is equal to the weight of the solid wooden sphere .

The weight of the sphere is calculated from the density of the solid wooden sphere.

S.G = density of solid wooden sphere / density of liquid

where;

¹/₂ = ρ / (800 kg/m³)

ρ  = ¹/₂ x 800 kg/m³

ρ  = 400 kg/m³

The mass of the solid wooden sphere is calculated as;

m = density x volume

m = 400 kg/m³  x  0.01 m³

m = 4 kg

The tension in the cord is calculated as follows;

T = W = mg

T = 4 kg  x  9.8 m/s²

T = 39.2 N

Thus, the tension in cord is equal to the weight of the solid wooden sphere submerged in the liquid.

Learn more about tension in cord here: https://brainly.com/question/24994188

#SPJ1

The maximum height the rocket will reach is 298.584m if its initial velocity is 76.5m/sec and it flies upwards.

We know that at highest point final velocity of the rocket will be 0m/sec.Now,we have initial velocity of rocket,final velocity of rocket,acceleration due to gravity.

We are taking upward direction as positive and downward direction as negative, due to that value of acceleration due to gravity is -9.8m/sec²

So,we can use third equation of motion which is given by

v² - u² =2aS

where v is the final velocity of rocket,

u is initial velocity of rocket

a is acceleration of the rocket

and S is the distance travelled by the rocket

We have v=0m/sec,u=76.6m/sec,a=9.8m/sec²,S=?

So,on putting the values,we get

=>(0)² - (76.5)² = 2 × (-9.8) × S

=>S=(76.5)² / 19.6

=>S=5852.25/19.6

=>S=298.584m

Hence, maximum height attained by rocket  is 298.584m.

To know more about height,visit here:

https://brainly.com/question/25099086

#SPJ4

Your marital status, health information, shopping patterns, financial transactions, income, account balances, criminal history, and level of education are not included in your credit report. Thus, option C is correct.

Your credit report contains personal information, credit account history, credit queries, and public records. These details will be provided to the credit reporting agencies by your creditors and lenders. A significant portion of information is utilized to determine your Scores, which tell prospective lenders how creditworthy you are.

All credit reports contain essentially the same types of information, even if Experian, Equifax, and TransUnion format and publish your information differently.

Therefore, The amount of money in your checking account.

Learn more about credit report here:

https://brainly.com/question/2989702

#SPJ1