Help ASAP 20 Points

Answer:

first circle is radius= 12.5 inches and diameter= 25 inches

second circle is radius=2 feet and diameter=4 feet

Step-by-step explanation:

radius is the point halfway down the circle. diameter is full length straight across the whole circle.

further analysis;

in the first circle it gives you the diameter which is 25 inches. in order to get the radius you cut 25 in half which is 12.5 inches.

in the second circle it gives you the radius which is 2 feet. in order to get the diameter you need to double 2 feet which is a total of 4 feet.

Answer:

B is the correct answer

Step-by-step explanation:

Answer:

51.5 ft^2

Step-by-step explanation:

The length of the diameter circumcised about this isosceles triangle is 32 cm.

To find the length of the circumcircle's diameter, we can use the properties of an isosceles triangle.

In an isosceles triangle, the vertex angle is the angle formed by the two congruent sides. In this case, the vertex angle is given as 120 degrees.

We know that the vertex angle of an isosceles triangle is located opposite the base. Let's denote the base as side a, and the congruent sides as side b.

In an isosceles triangle, the base angles are congruent. Since the sum of the angles in a triangle is 180 degrees, each base angle in this triangle measures (180 - 120) / 2 = 30 degrees.

Now, we can apply the Law of Sines to find the length of the base, side a. The Law of Sines states:

a/sin(A) = b/sin(B) = c/sin(C)

In our case, since angle A is the vertex angle and side a is the base, we have:

a/sin(120) = b/sin(30)

Using the given length of the leg (side b) as 8 cm, we can solve for side a:

a/sin(120) = 8/sin(30)

a = (8 × sin(120)) / sin(30)

Using the values of sin(120) and sin(30) from a trigonometric table or calculator:

a ≈ (8 × √3) / (1/2) = 16√3 cm

Now, let's find the length of the diameter of the circumcircle. The circumcircle of a triangle passes through the vertices of the triangle and has its center at the intersection of the triangle's perpendicular bisectors.

Since the triangle is isosceles, the perpendicular bisector of the base will pass through the vertex angle and bisect it, resulting in two 60-degree angles.

In an equilateral triangle, the perpendicular bisector of a side passes through the triangle's center, which coincides with the center of the circumcircle. Since our isosceles triangle has two congruent sides, we can treat it as half of an equilateral triangle.

The length of the diameter of the circumcircle of an equilateral triangle is given by the formula:

Diameter = 2 × (side length) / √3

In our case, since we have half of an equilateral triangle, the diameter of the circumcircle will be:

Diameter = 2 × (16√3) / √3 = 32 cm

Therefore, the length of the diameter circumcised about this isosceles triangle is 32 cm.

for such more question on diameter

https://brainly.com/question/28700310

#SPJ8

For the CDF of a continuous real function, the answers are as follows:

(i) P(X = Y) = 0 because P(X ≤ Y) > 0 and P(X < Y) > 0 and both are strictly positive

(ii) P(exist i < j with Xi = Xj) = 0 which is a contradiction.

(i) Suppose the CDF F is a continuous real function and note that this does not imply F is differentiable. Assume for simplicity that F(0) = 0 and F(1) = 1 (this does not change the major statements below but makes the proof a bit cleaner). If X, Y are independent F-distributed RVs, then for any n in N, we have; P(X ≤ Y) = P(X ≤ Y, Y ≤ X) = P(X ≤ Y|Y ≤ X) P(Y ≤ X) = P(Y ≤ X|X ≤ Y) P(X ≤ Y) = P(X ≤ Y|X ≤ Y) P(X ≤ Y) = P(X = Y). Hence, P(X = Y) = P(X ≤ Y)P(Y ≤ X) = P(X ≤ Y)P(X ≤ Y) = P²(X ≤ Y).Since F is continuous, P(X ≤ Y) = P(X < Y) = P(X ≤ Y) - P(X = Y). Therefore, P(X = Y) = 0 because P(X ≤ Y) > 0 and P(X < Y) > 0 and both are strictly positive.

(ii) Conclude that P(X = Y) = 0 (remember that you cannot assume F has a density). As for the sample case, we show that P(exist i < j with Xi = Xj) = 0. Suppose, for the purpose of contradiction, that we have X1, . . . , Xn in F such that P(exist i < j with Xi = Xj) > 0. Then, there must be some distinct i < j such that Xi = Xj. Without loss of generality, we may assume i = 1 and j = 2. Then, the probability that this event occurs is; P(X1 = X2, X3 ≠ X1, . . . , Xn ≠ X1) = P(X2 ≤ X1, X3 ≠ X1, . . . , Xn ≠ X1) + P(X1 < X2, X3 ≠ X1, . . . , Xn ≠ X1)Since Xi are independent F-distributed RVs and P(X = Y) = 0, it follows that the probability of the first term in the sum above is zero. Therefore, P(exist i < j with Xi = Xj) = 0 which is a contradiction.

To know more about CDF, visit the link : https://brainly.com/question/30402457

#SPJ11

Answer:

12z-32

Step-by-step explanation:

-4z-12-20+16z

Answer:

A. 72 cm

Step-by-step explanation:

72 x 2/3 = 48

Answer:

72 cm

Step-by-step explanation:

if the smaller figure is 48 cm and its a 2/3 ratio

lets just say 2x:3x

2x=48 so x would =24

then the larger perimeter would be 3*24 which is 72

Answer:

BXC=70 degrees

Step-by-step explanation:

XBC = 55

corresponding angles are equal

XCB=55

isosceles base angles are equal

BXC=70

angles in a triangle add up to 180 degrees

Comparing the two z-scores, we can conclude that the student performed better relative to the other testers on the first exam because the z-score of 1 is closer to the mean (0) than the z-score of 2.5 on the second exam.

Given that the national mean and standard deviation were 475 and 100, respectively for the first test, and 40 and:8, respectively for the second test and the student scored 575 on the first test and 60 on the second test, we are to use z-scores to determine which exam the student performed better relative to the other testers.

A z-score is a numerical measure of a value's relationship to the mean of a group of values, measured in terms of the number of standard deviations from the mean. It can be calculated using the formula; z = (x - μ) / σ, where x is the value, μ is the mean, and σ is the standard deviation.

For the first exam;z-score = (x - μ) / σ = (575 - 475) / 100 = 1For the second exam;z-score = (x - μ) / σ = (60 - 40) / 8 = 2.5

To Know more about z-scores visit:

https://brainly.com/question/31871890

#SPJ11

Given that a student took two national aptitude tests. The national mean and standard deviation were 475 and 100, respectively for the first test, and 40 and:8, respectively for me second test the student scored 575 on the test and 60 on the second test. The student performed better relative to other test-takers on the second test as the z-score of the second test is higher than the z-score of the first test.

In order to determine which test the student performed better on relative to other test-takers, we need to calculate the z-score for each test.

For the first test, the national mean is 475 and the standard deviation is 100.

The student's score is 575.

The z-score is calculated as:

z = (x - μ) / σ

z = (575 - 475) / 100

z = 1

For the second test, the national mean is 40 and the standard deviation is 8.

The student's score is 60.

The z-score is calculated as:

z = (x - μ) / σ

z = (60 - 40) / 8

z = 2.5

Since the z-score is a measure of how many standard deviations an observation is above or below the mean, a higher z-score indicates that the student performed relatively better compared to other test-takers.

Therefore, the student performed better relative to other test-takers on the second test as the z-score of the second test is higher than the z-score of the first test.

To know more about z-score, visit:

https://brainly.com/question/31871890

#SPJ11

Answer:

64y^2

Step-by-step explanation:

Answer:

Air

Step-by-step explanation:

You can't really measure air

Answer:

Air

Step-by-step explanation:

You cannot measure air because it is invisible.

its a           .......................................Step-by-step explanation:

Answer:

[tex]\frac{80-19.25}{6.75} = x[/tex]

Step-by-step explanation:

Subtract $19.25 from the Amount Used for Payment ($80) to get the amount spent, then divide the amount of each sandwich to get the amount of sandwiches bought.

Answer:

-x² + 6x - 17

Step-by-step explanation:

First, expand (x-3)² using FOIL

(x - 3)(x - 3)

= x² - 6x + 9

Distribute the negative sign to the expression:

-(x² - 6x + 9)

-x² + 6x - 9

Now, subtract 8 from this

-x² + 6x - 9

= -x² + 6x - 17

So, the equation in standard form is -x² + 6x - 17

The answer is.. x^2+6x-17

The set of real numbers with a repeating decimal expansion is countable because it can be mapped to a countable set of unique pairs of rational numbers.

To show that the set of all real numbers with a repeating decimal expansion is countable, we can prove that it is at most countable.

Let's consider a repeating decimal number 0.d1d2d3...dn(dn+1...dn+m-1dn+m...). This can be represented as 0.d1d2d3...dn + (dn+1...dn+m-1dn+m...)/([tex]10^m - 1[/tex]).

We can see that for any repeating decimal number, the part before the repeating block (0.d1d2d3...dn) is a finite decimal representation, which is a rational number.

The part within the repeating block ((dn+1...dn+m-1dn+m...)/([tex]10^m - 1[/tex])) is also a rational number because it can be expressed as a fraction.

Since both the finite decimal part and the repeating block part are rational numbers, we can map each repeating decimal number to a unique pair of rational numbers (finite decimal part, repeating block part).

Now, we know that the set of rational numbers is countable. Therefore, if we can show that the set of unique pairs of rational numbers is countable, then the set of repeating decimal numbers is at most countable.

To show that the set of unique pairs of rational numbers is countable, we can use the fact that the Cartesian product of countable sets is countable.

Since the set of rational numbers is countable, the set of unique pairs of rational numbers (finite decimal part, repeating block part) is also countable.

Thus, we can conclude that the set of all real numbers with a repeating decimal expansion is at most countable.

To know more about a rational number follow

brainly.com/question/1535013

#SPJ4

The Economic Stimulus Act of 2008 focused on providing tax relief, while the American Recovery and Reinvestment Act of 2009 focused on a combination of tax cuts, government spending, and investments for economic growth.

the Economic Stimulus Act of 2008 was enacted in response to the economic downturn that occurred during the Great Recession. Its main objective was to provide immediate relief to the economy by implementing tax incentives and rebates for individuals and businesses. The act aimed to encourage consumer spending and investment by putting more money into people's pockets and reducing the tax burden on businesses.

On the other hand, the American Recovery and Reinvestment Act of 2009 was a broader and more comprehensive economic stimulus package. It included a mix of tax cuts, grants, loans, and direct government spending on infrastructure projects, renewable energy, healthcare, education, and other areas. The goal was to not only provide short-term economic relief but also to make long-term investments that would promote sustainable economic growth and job creation.

Overall, while both acts were aimed at stimulating the economy, the focus of the Economic Stimulus Act of 2008 was primarily on tax relief, while the American Recovery and Reinvestment Act of 2009 encompassed a wider range of measures to boost the economy and address various sectors affected by the recession.

Learn more about recession here:

https://brainly.com/question/31926163

#SPJ11

Answer:

2

Step-by-step explanation:

Subtract the number with the term both sides ( which is 9)

[tex] {x}^{2} + {y}^{2} - 6x + 4y = - 9[/tex]

Complete the square for the x terms and y terms.

( To complete the square divide the coefficient term by 2 and square it, then add that product to both sides.)

[tex] {x}^{2} - 6x + 9 + {y}^{2} +4y + 4 = - 9 + 9 + 4[/tex]

[tex] (x - 3) {}^{2} + (y + 2) {}^{2} = 4[/tex]

Take the square root of the right side to find the radius

[tex] \sqrt{4} = 2[/tex]

A possible set of scores for the students is: 4, 4, 6, 6, 6

We are given that five students took the quiz. If the lowest score is 4 and the highest score is 6, we can say that the set of values ​​can be expressed as:

4, x, y, z, 6

Here we can see that the mode is 6 and the mean is 5.2. Therefore, at least one other student of hers has scored her 6, which could result in:

4, x, y, 6, 6

Therefore:

(4 + x + y + 6 + 6)/5 = 5.2

16+x+y=26

x + y = 10

So the other two numbers are probably 6 and 4, because 6 is the mode, so they can't both be 5.

Read more about Measures of Central Tendencies at: https://brainly.com/question/17631693

#SPJ4

Let T: R² → R³ be a linear mapping, satisfying T(1, 2) = (1, 0, 1) and T (2,5) = (0, 1, 1). T(0, 1) is option (b) (-2, 1, -1)

Let T: R² → R³ be a linear mapping, and T(1, 2) = (1, 0, 1) and T (2,5) = (0, 1, 1).

To calculate T(0, 1), we must first determine the matrix A of T with respect to the standard basis of R² and R³.

Using the values of T(1, 2) and T(2, 5), we can create an augmented matrix with the standard basis vectors of R²:1 2 1 0 01 2 0 1 1

Using Gaussian elimination to solve this augmented matrix, we get:A = \begin{bmatrix} 1 & 2 \\ 0 & 1 \\ -1 & 1 \end{bmatrix}

Now, we can apply T to (0, 1) as follows: T(0, 1) = A(0, 1) = \begin{bmatrix} 1 & 2 \\ 0 & 1 \\ -1 & 1 \end{bmatrix} \begin{bmatrix} 0 \\ 1 \end{bmatrix} = \begin{bmatrix} 2 \\ 1 \\ 0 \end{bmatrix}

Therefore, the answer is option (b) (-2, 1, -1).

Know more about linear mapping here,

https://brainly.com/question/32560791

#SPJ11

Answer:

Step-by-step explanation:

Unit rate = 26.2 ÷ 4 = 6.55

Answer:

Answer

Step-by-step explanation:

for 4. I think sports?

for 5. I think sports also.

Not sure though.. sorry if it's wrong.

Answer:

A) 4:5

Step-by-step explanation:

A) 4:5

B) 4:9

C) 5:4

D) 5:9

If there are 4 sixth grade students, you can already cross off D because there is no 4 as an option. There are 5 seventh grade students, you can cross off B because there's no 5. So now it's down to 4:5 or 5:4. Since it wants the ration of sixth to seventh, it's 4 to 5.

Hence, the ratio is 4:5, answer A

Hope this helps :)

Stay Cold,

Brook

Answer:

I DO NOT KNOW

Step-by-step explanation:

I am here for the answers

I am hungry

Pizza

Given below are the step-by-step solutions to the provided questions:

1. Determine whether 23, 340, 1 is divisible by 341, 341, 11, 77. To prove 23, 340, 1 is divisible by 341, 341, 11, 77:341 is not a prime number since it is equal to 11 * 31, and it is the LCM of 11 and 31.So, 341 is a composite number. To check the divisibility of 23, 340, 1 by 341, we need to find the remainder of 23, 340, 1 when it is divided by 341.Since 341 = 11 * 31, the remainder of 23, 340, 1 when divided by 341 will be the same as the remainder when 23, 340, 1 is divided by 11 and 31, respectively.Remainder of 23, 340, 1 when divided by 11:340 + 23 + 1 = 364364 = 11 × 33Therefore, the remainder of 23, 340, 1 when divided by 11 is 0.Remainder of 23, 340, 1 when divided by 31:10^3 ≡ −1 (mod 31)340 ≡ 12 (mod 31)23 ≡ −8 (mod 31)−8 − 12 − 1 = −21 = −1 × 31Therefore, the remainder of 23, 340, 1 when divided by 31 is 10.Therefore, the remainder of 23, 340, 1 when divided by 341 is 0.Since the remainder is 0, then 23, 340, 1 is divisible by 341, 341, 11, and 77. Hence, the given statement is true.

2. Show that (Zn + nXn) is a commutative ring with unity assuming it is a commutative additive n' group.To prove that (Zn + nXn) is a commutative ring with unity assuming it is a commutative additive n' group:Firstly, we need to prove that Zn is a commutative ring with unity given that it is a commutative additive n' group.Commutativity of addition:a, b ∈ Zna + b = b + aAssociativity of addition:a, b, c ∈ Zna + (b + c) = (a + b) + cExistence of additive identity:n ∈ Zna + n = n + a = aAdditive inverse:For every a ∈ Zn there exists an element -a in Zn such that a + (-a) = (-a) + a = nExistence of multiplication:For a ∈ Zn and b ∈ Zn, their product ab is defined as ab ∈ Zn Multiplication is distributive over addition:For a, b, c ∈ Zna(b + c) = ab + ac and(a + b)c = ac + bcThus, we have proven that Zn is a commutative ring with unity given that it is a commutative additive n' group.Now we need to prove that (Zn + nXn) is a commutative ring with unity given that it is a commutative additive n' group.Zn is a commutative ring with unity and Xn is a commutative additive group. Hence, we have the following:Commutativity of addition:a, b ∈ (Zn + nXn)a + b = b + aAssociativity of addition:a, b, c ∈ (Zn + nXn)a + (b + c) = (a + b) + cExistence of additive identity:n ∈ (Zn + nXn)a + n = n + a = aAdditive inverse:For every a ∈ (Zn + nXn) there exists an element -a in (Zn + nXn) such that a + (-a) = (-a) + a = nExistence of multiplication:For a ∈ (Zn + nXn) and b ∈ (Zn + nXn), their product ab is defined as ab ∈ (Zn + nXn)Multiplication is distributive over addition:For a, b, c ∈ (Zn + nXn)a(b + c) = ab + ac and(a + b)c = ac + bcThus, (Zn + nXn) is a commutative ring with unity assuming it is a commutative additive n' group.

Know more about commutative ring here:

https://brainly.com/question/32556076

#SPJ11

Answer: C

Step-by-step explanation:

Answer:

A'=(4,-8)

B'=(4,12)

C'=(-12, -12)

Step-by-step explanation:

Ad 3 to the location you are heading remember first is x then y so (x, y)

X is always left and right

Y is always up or down

Answer:

Step-by-step explanation:

The mean housing cost for the given cities is $20.42.

The standard deviation of housing costs for the given cities is 1.91.

The mean is calculated by summing up all the values in the dataset and dividing the sum by the total number of values. In this case, we have the following data for housing costs in different cities:

Comparative City Housing Cost

NY $16.00

Coors $20.00

Los Angeles $22.05

Santa Barbara $18.70

Oceanside $22.90

Porterville $20.50

New York $21.40

To calculate the mean, we add up all the values:

Sum = $16.00 + $20.00 + $22.05 + $18.70 + $22.90 + $20.50 + $21.40 = $141.55

Next, we divide the sum by the total number of values, which is 7 in this case:

Mean = $141.55 / 7 = $20.42

Therefore, the mean housing cost for the given cities is $20.42.

The standard deviation is a measure of the spread or variability in the dataset. It tells us how much the individual values deviate from the mean.

The formula for calculating the standard deviation is:

σ = sqrt[(Σ(x - μ)^2) / N]

Where:

σ is the standard deviation

Σ represents the sum of

x represents each individual value

μ is the mean

N is the total number of values

Using the given data, we substitute the values into the formula:

σ = sqrt[((16 - 20.42)^2 + (20 - 20.42)^2 + (22.05 - 20.42)^2 + (18.70 - 20.42)^2 + (22.90 - 20.42)^2 + (20.50 - 20.42)^2 + (21.40 - 20.42)^2) / 7]

Simplifying the expression within the square root:

σ = sqrt[(5.2364 + 0.0016 + 0.0264 + 2.7164 + 0.0524 + 0.0064 + 0.0064) / 7]

σ = sqrt[8.0456 / 7]

σ = sqrt(1.1494)

σ ≈ 1.07

Therefore, the standard deviation of housing costs for the given cities is approximately 1.07.

These calculations provide a measure of the average and spread of the housing costs across the different cities.

To learn more about standard deviation visit : https://brainly.com/question/475676

#SPJ11