Help me please it’s due right now review question help

Answer:

B. 3.1 × 10^5 V

Explanation:

Answer:

B

Explanation:

e2021

Answer:

The correct answer is "6666.67 N".

Explanation:

The given values are:

Mass,

m = 0.100

Relative speed,

v = 4.00 x 10³

time,

t = 6.00 x 10⁻⁸

As we know,

⇒  [tex]F=m(\frac{\Delta v}{\Delta t} )[/tex]

On substituting the given values, we get

⇒      [tex]=0.100\times 10^{-6}(\frac{4\times 10^3}{6\times 10^{-8}} )[/tex]

⇒      [tex]=6666.67 \ N[/tex]

Answer:

A. Increases

Explanation:

As altitude decreases, the amount of gas molecules in the air increases - the air becomes less dense. As altitude increases, the amount of gas molecules in the air decreases—the air becomes less dense.

Answer:

It decreases so it is B

Explanation:

As altitude rises, air pressure drops.

Answer:

Explanation:

stress = ?

length =5 m

area of cross section = 0.04 cm or 0.0004m

force = 20 × 10 = 200 N ( w = mg) g = 10

formula : stress = force / cross-sectional area

stress = 200 / 0.0004

stress = 500,000 Nm^-2

Answer:

The border is 8km above sea level.

Explanation:

We know that:

Density = 1.25 kg/m^3

Pressure = 10^5 N/m^2

g = 10m/s^2

Now, suppose that we have a virtual rectangle, such that its bases have an area of 1m^2 and the rectangle has a height equal to H.

This virtual figure has a volume V = 1m^2*H, and it is filled with air (which we know that has a density 1.25 kg/m^3)

Then the total mass inside that volume is:

M = (1.25 kg/m^3)*V = (1.25 kg/m^3)*(1m^2*H)

The weight of this mass is:

W = g*M = (10m/s^2)*(1.25 kg/m^3)*(1m^2*H)

And if we divide the weight in a given surface, let's say 1 m^2, we get the pressure per square meter, which we know is equal to  10^5 N/m^2

then:

P = 10^5 N/m^2 = (10m/s^2)*(1.25 kg/m^3)*(1m^2*H)*(1/m^2)

Whit this equation we can find the value of H.

10^5 N/m^2 = (10m/s^2)*(1.25 kg/m^3)*(1m^2*H)*(1/m^2)

10^5 N =  (10m/s^2)*(1.25 kg/m^3)*(1m^2*H)

(10^5 N)/(10 m/s^2) = (1.25 kg/m^3)*(1m^2*H)

(10^4 kg) = (1.25 kg/m^3)*(1m^2*H)

(10^4 kg)/( 1.25 kg/m^3) = 1m^2*H

8,000 m^3 = 1m^2*H

(8,000 m^3)/(1m^2) =H

8,000 m = H

And we want this answer in km, knowing that 1,000m = 1km

8,000m = 8km = H

The border is 8km above sea level.

Height of boundaries is 8.2 km

Normal density = 1.25 kg/m³

1 atm = 101325 N/m²

Height of boundaries

Pressure = Height × Density × Gravitational acceleration

101325 = Height × 1.25 × 9.8

101325 = Height × 12.25

Height of boundaries = 101325 / 12.25

Height of boundaries = 8271.42 m

Height of boundaries = 8.2 km

https://brainly.com/question/23358029

Answer:

the electric field strength inside the resistor is 2.57 V/m

Explanation:

Given;

current flowing through the wire, I = 1.10 A

resistance of the wire, R = 7.00 Ω

length of the wire, L = 3.00 m

The emf created inside the resistor is calculated as;

V = IR

V = 1.10 x 7

V = 7.7 V

The electric field strength inside the resistor is calculated as;

E = V/L

E = 7.7 / 3

E = 2.57 V/m

Therefore, the electric field strength inside the resistor is 2.57 V/m

Answer:

4.25 rad/s

Explanation:

Given that.

Mass, m = 51.9 kg

Radius, r1 = 2.4 m

Moment of inertia, I = 215.24 kgm^2

Angular velocity, ω = 2.1 rad/s

Radius, r2 = 0.864 m

To start with, we are going to use the Conservation of angular momentum to solve the question, which is

l(initial) = l(final)

[I₁ + I₂](initial)*ω(initial) = [I₁ + I₂](final)*ω(final)

Making ω(final) the subject of formula, we have

ω(final) = [I₁ + I₂](initial)*ω(initial) / [I₁ + I₂](final)

ω(final) = [215.24 + (51.9)(2.4)²](2.1) / [215.24 + (51.9)(0.864)²]

ω(final) = [215.24 + 298.944]2.1 / [215.24 + 38.74]

ω(final) = 514.184 * 2.1 / 253.98

ω(final) = 1079.786 / 253.98

ω(final) = 4.25 rad/s

= 5.273 rad/s

Answer: 2.67

Explanation: it said he went from 0 to 8 in 3 seconds so if we divide eight By three we get 2.67 rounded to the nearest hundredth so you accelerated that 2.67 m/s

Answer:

The human body carries out its main functions by consuming food and turning it into usable energy. Immediate energy is supplied to the body in the form of adenosine triphosphate (ATP). Since ATP is the primary source of energy for every body function, other stored

Explanation:

this what teacher explain to us

Answer: A

Explanation:

Because someone who is aggressive, stubborn, or proud of theirselves are more likely to think they're above everyone else and be a bully. However someone who is willing to compromise is better since you can generally make everyone happy that way

HOPE THIS HELPS ^^

Answer:

because they are found freely in nature uncombined so they are highly reactive with other elements

Answer:

The second bulb will have thicker filament

Explanation:

Given;

First electric bulb: Power, P₁ = 100 W and Voltage, V₁ = 220 V

Second electric bulb: Power, P₂ = 200 W and Voltage, V₂ = 200 V

Resistivity of tungsten, ρ = 4.9 x 10⁻⁸ ohm. m

Resistance of the first bulb:

[tex]P = IV = \frac{V}{R} .V = \frac{V^2}{R} \\\\R = \frac{V^2}{P} \\\\R_1 = \frac{V_1^2}{P_1} = \frac{(220)^2}{100} = 484 \ ohms[/tex]

Resistance of the second bulb:

[tex]R_2 = \frac{V_2^2}{P_2} = \frac{(200)^2}{200} = 200 \ ohms[/tex]

Resistivity of the tungsten filament is given by the following equation;

[tex]\rho = \frac{RA}{L}[/tex]

where;

L is the length of the filament

R is resistance of each filament

A is area of each filament

[tex]A = \pi r^2[/tex]

where;

r is the thickness of each filament

[tex]\rho = \frac{R (\pi r^2)}{L} \\\\\frac{\rho L}{\pi} = Rr^2 \\\\Recall ,\ \frac{\rho L}{\pi} \ is \ constant \ for \ both \ filaments\\\\R_1r_1^2 = R_2r_2^2\\\\(\frac{r_1}{r_2} )^2 = \frac{R_2}{R_1} \\\\\frac{r_1}{r_2} = \sqrt{\frac{R_2}{R_1} } \\\\\frac{r_1}{r_2} = \sqrt{\frac{200}{484} } \\\\\frac{r_1}{r_2} = 0.64\\\\r_1 = 0.64 \ r_2\\\\r_2 = 1.56 \ r_1[/tex]

Therefore, the second bulb will have thicker filament

Answer:

question #1 is A

Question #2 is C

Explanation:

Answer:

The speed of the bird is 1.00% of the speed of sound.

Explanation:

The speed of the bird can be found by using the Doppler equation:

[tex] f = f_{0}(\frac{v - v_{r}}{v - v_{s}}) [/tex]

Where:

v: is the speed of sound = 343 m/s

f₀: is the frequency emitted = 1490 Hz

f: is the frequency observed = 1505 Hz

[tex]v_{r}[/tex]: is the speed of the receiver = 0 (it is stationary)

[tex]v_{s}[/tex]: is the speed of the source =?

The minus sign of [tex]v_{s}[/tex] is because the source is moving towards the receiver.

By solving the above equation for [tex]v_{s}[/tex] we have:

[tex] v_{s} = v - \frac{f_{0}*v}{f} = 343 - \frac{1490*343}{1505} = 3.42 m/s [/tex]

The above speed in terms of the speed of sound is:

[tex]\% v_{s} = \frac{3.42}{343}\times 100 = 1.00 \%[/tex]

Therefore, the speed of the bird is 1.00% of the speed of sound.  

I hope it helps you!

1. third law

2. first law

3. third law

4. second law

Answer:

Most likely (B)

Explanation:

B in the passage is the most representative out of all your choices and it has evidence from the passage  

Hope dis helps Jit!

Sorry i forgot to type C

B and C both measure mass while the others are calculations and are bias

The following experimental set-ups would allow a student to calculate the magnitude of the gravitational field strength using only the quantities measured:

A gravitational field is a model used in physics to explain the effects that a large thing has on the area surrounding it, exerting a force on smaller, less massive bodies.

When  a known mass from a spring scale is hung; by e; measuring the spring scale reading when the mass is at rest, the magnitude of the gravitational field strength ( reading/mass) can be calculated.

When  a heavy metal ball is dropped, by measuring e the drop height and the time it takes the ball to hit the ground, the magnitude of the gravitational field strength ( h = gt²/2) can be calculated. Hence, option (B) and option (D) is correct.

Learn more about  gravitational field here:

https://brainly.com/question/26690770

#SPJ2

Answer:

true

Explanation:

with increased temperature particles move faster as they gain kinetic energy

Answer:

[tex]0.842\ \text{lb ft}[/tex]

[tex]0.1052\ \text{lb ft}[/tex]

Explanation:

d = Diameter of wheel = 6 in

r = Radius = 3 in = [tex]\dfrac{3}{12}=0.25\ \text{ft}[/tex]

t = Thickness = [tex]\dfrac{3}{4}=0.75\ \text{in}=\dfrac{0.75}{12}\ \text{ft}[/tex]

w = Specific weight = [tex]425\ \text{lb/ft}^3[/tex]

[tex]t_2[/tex] = Time taken to slow down = 35 s

[tex]t_1[/tex] = Time taken to reach operating speed = 5 s

[tex]\omega[/tex] = Angular velocity = [tex]3450\times \dfrac{2\pi}{60}\ \text{rad/s}[/tex]

Weight is given by

[tex]W=2\pi r^2tw\\\Rightarrow W=2\pi\times 0.25^2\times \dfrac{0.75}{12}\times 425\\\Rightarrow W=10.43\ \text{lbs}[/tex]

Mass is given by

[tex]m=\dfrac{W}{g}\\\Rightarrow m=\dfrac{10.43}{32}\\\Rightarrow m=0.326\ \text{lb}[/tex]

Moment of inertia is given by

[tex]I=\dfrac{mr^2}{2}\\\Rightarrow I=\dfrac{0.326\times 0.25^2}{2}\\\Rightarrow I=0.01019\ \text{lb ft}^2[/tex]

Angular acceleration while slowing down is given by

[tex]\alpha_f=\dfrac{\omega}{t_2}\\\Rightarrow \alpha_f=\dfrac{3450\times \dfrac{2\pi}{60}}{35}\\\Rightarrow \alpha_f=10.32\ \text{rad/s}^2[/tex]

Frictional moment is given

[tex]\tau_f=I\alpha_f\\\Rightarrow \tau_f=0.01019\times 10.32\\\Rightarrow \tau_f=0.1052\ \text{lb ft}[/tex]

Frictional moment is [tex]0.1052\ \text{lb ft}[/tex]

Angular acceleration while speeding up is given by

[tex]\alpha=\dfrac{\omega}{t_1}\\\Rightarrow \alpha=\dfrac{3450\times \dfrac{2\pi}{60}}{5}\\\Rightarrow \alpha=72.26\ \text{rad/s}^2[/tex]

Motor torque is given by

[tex]\tau_m=\tau_f+I\alpha\\\Rightarrow \tau_m=0.1052+0.01019\times 72.26\\\Rightarrow \tau_m=0.842\ \text{lb ft}[/tex]

Motor torque is [tex]0.842\ \text{lb ft}[/tex].

Answer:

20.0N

Becuase It's the largest

Answer:

20.0

Explanation:

It's the biggest number

Answer:

Answer: Oxygen

Explanation:

Oxygen would not be considered as a pollutant

Answer:

Hey there the answer is C. Oxygen

Explanation:

Oxygen is the chemical element with the symbol O and atomic number 8. It is a member of the chalcogen group in the periodic table, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements as well as with other compounds. After hydrogen and helium, oxygen is the third-most abundant element in the universe by mass. At standard temperature and pressure, two atoms of the element bind to form dioxygen, a colorless and odorless diatomic gas with the formula O 2. Diatomic oxygen gas constitutes 20.95% of the Earth's atmosphere. Oxygen makes up almost half of the Earth's crust in the form of oxides. Hope this helps! Have a great day!

Answer:

Option C

Explanation:

Options for the question are as follows -

A. At a faucet close to entrance valve

B. At a faucet away from the entrance valve

C. It will be the same at all faucets

D. There will be no increase in the pressure at the faucets

Solution -

The static force will be the same at all faucets and also the area of the faucets be same.

Thus, the pressure created at all faucets will be the same.

Thus, option C is correct

The final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.

The final angular velocity of the carnival ride is determined by applying third kinematic equation as shown below;

ωf = ωi + 2αθ

where;

ωf = 0 + 2(2.0) x 6.3

ωf = 25.2 rad/s

Thus, the final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.

​

Learn more about angular velocity here: https://brainly.com/question/6860269

Answer: 5.0 rad/s

Explanation: Because that’s what khan said so try it out.

Answer:

The force of gravity is not the same as being on the earth. when your on the earth there no gravitational pull its all up to the air

Explanation:

No explanation