Hey guys so my cuz gave me this stone when he went to mexico
can u plz tell me what kind of stone this is?

Answer:

The pressure will be 4.27 atm.

Explanation:

Gay-Lussac's law can be expressed mathematically as follows:

[tex]\frac{P}{T} =k[/tex]

Where P = pressure, T = temperature, K = Constant

This law indicates that the quotient between pressure and temperature is constant.

This law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move faster. Then the number of collisions with the walls increases, that is, the pressure increases. That is, the pressure of the gas is directly proportional to its temperature.

In short, when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases.

You want to study two different states, an initial state and a final state. You have a gas that is at a pressure P1 and a temperature T1 at the beginning of the experiment. By varying the temperature to a new value T2, then the pressure will change to P2, and the following will be fulfilled:

[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]

In this case:

Replacing:

[tex]\frac{4 atm}{293 K} =\frac{P2}{313 K}[/tex]

Solving:

[tex]P2= 313 K* \frac{4 atm}{293 K}[/tex]

P2= 4.27 atm

The pressure will be 4.27 atm.

Explanation:

La reacción entre un ácido y una base se llama neutralización. Cuando en la reacción participan un ácido fuerte y una base fuerte se obtiene una sal y agua. Si una de las especies es de naturaleza débil y la neutralización se produce en disolución acuosa también se obtiene su respectiva especie conjugada y agua.

Answer:

If i had to take a stab at it would say C

Explanation:

Answer:

I think it might be C but not 100% sure.

Explanation:

When the object transmits all color frequencies.

Answer:

See explanation

Explanation:

Nicotine is a covalent molecule. Recall that covalent molecules are not soluble in water and do not have any kind of ionic interaction.

Let us recall that nicotine contains a nitrogen atom having a lone pair of electrons. When nicotine reacts with HCl, this lone pair is protonated to form the ionic compound called nicotine hydrochloride.

C₁₀H₁₄N₂ + HCl --------> C₁₀H15N₂Cl

Answer: The concentration of [tex]I_2[/tex] at equilibrium is 0.45 M

Explanation:

Equilibrium constant is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_c[/tex]  

For the given chemical reaction:

[tex]H_2(g)+I_2(g)\rightarrow 2HI(g)[/tex]

The expression for [tex]K_c[/tex] is written as:

[tex]K_c=\frac{[HI]^2}{[H_2]^1[I_2]^1}[/tex]

[tex]6.0=\frac{(0.90)^2}{(0.30)^1\times (I_2)^1}[/tex]

[tex][I_2]=0.45M[/tex]  

Thus concentration of [tex]I_2[/tex] at equilibrium is 0.45 M

Answer:

b

Explanation:

Answer:

1. 7 periods

2. 18 groups

3.Magnessium

4.Fluorine

5.Nickel

6.Radon

7.Francium

8.Lead

Explanation:

Answer:

Element   atom    molar mass     Total        % composition

Na               1            23                    40             57.5 %

O                 1            16                     40              40%

H                1               1                      40              2.5 %

The given compound is NaOH.

Na : number of atom= 1

Molar mass= 23 g/mol

Total mass of NaOH = 40 g/mol

% composition by mass = [tex]\frac{\text {mass of atom}}{\text {Total mass}}\times 100=\frac{23}{40}\times 100=57.5\%[/tex]

O : number of atom= 1

Molar mass= 16 g/mol

Total mass of NaOH = 40 g/mol

% composition by mass = [tex]\frac{\text {mass of atom}}{\text {Total mass}}\times 100=\frac{16}{40}\times 100=40\%[/tex]

H : number of atom= 1

Molar mass= 1 g/mol

Total mass of NaOH = 40 g/mol

% composition by mass = [tex]\frac{\text {mass of atom}}{\text {Total mass}}\times 100=\frac{1}{40}\times 100=2.5\%[/tex]

Answer:

Option c.

Explanation:

According to Newton's law, formula to solve this problem is:

F = m . a

Mass → 1000 kg

a → 3 m/s²

F = 1000 kg . 3m/s² →  3000 N

1 N = 1 kg .  m/s²  according to SI, Internation System of units.

Answer:

it decreases

Explanation:

It is a common saying the pressure decreases with height. This means that as altitude increases, the pressure of air decreases. The higher you go above sea level, the pressure becomes lesser.

This is as a result of decrease in the amount of air above sea level and hence a decrease in the density of air as altitude increases.

Hence, with increasing altitude, pressure decreases.

Answer:

It decreases

Explanation:

as pstnonsonjoku says in their answer.

I cannot give you anything more than I just did a question on this an it was correct because i'm in a timed test and just happend to see this!

Have a great nightish day!

Answer:

Explanation:

siltstone

Over millions of years, silt washed into a lake formed layers of sedimentary rock. What type of rock was likely formed? A type of detrital sedimentary rock called siltstone was the likely product of this process.

Answer:

Eukaryotes

Explanation:

Answer:

2.31847E25

Explanation:

One mole of anything contains 6.022 x 10^23 items.

Answer:

Density = mass/volume

= 44/22.4

= 1.96 gram/liter

The density of the Carbon Dioxide at S.T.P. (Standard Temperature and Volume) is 1.96 gram/liter.

Answer:

I'm am so cool I'm depressed tho so yeah good job lady

Explanation:

Explanation:

these are the formula that u need to know

1. moles= concentrate × volume

2. moles = mass / mr

3. moles = volume in dm3 / 24dm^3

4. moles = Pressure in pa × Volume in m3 / 8.031 × temperature in K

hope this helps :)

Answer:

55.1 g Si.

Explanation:

Hello there!

In this case, for the given mole-mole relationship, it is possible to set up the following mole ratio as the moles of Si and P are the same:

1 mol Si = 1 mol P.

Next, since one mole of silicon has a mass of 28.09 g and one of phosphorous of 31.0 g, we can set up the following expression for the mass of silicon:

[tex]60.8gP*\frac{1molP}{31.0gP}*\frac{1molSi}{1molP}*\frac{28.09gSi}{1molSi}[/tex]

Therefore, the result is 55.1 grams of silicon.

Best regards!

Answer:

5.98 × 10^22 particles

Explanation:

To get the number of particles (nA) in a substance, we multiply the number of moles of the substance by Avogadro's number (6.02 × 10^23)

The mass of Al2(SO4)3 given in this question is as follows: 34grams.

To convert this mass value to moles, we use;

Mole = mass/molar mass

Molar Mass of Al2(SO4)3 = 27(2) + {(32 + 16(4) }3

= 54 + (32 + 64)3

= 54 + 288

= 342g/mol

mole (n) = 34/342

n = 0.0994mol

number of particles (nA) of Al2(SO4)3 = 0.0994 × 6.02 × 10^23

= 0.598 × 10^23

= 5.98 × 10^22 particles

Answer: KCIO3

Explanation:

The graph shows that it is the lowest at 0 degrees meaning that it has the lowest solubility

Answer:

KOL c

Explanation:

Answer:

f

Explanation:

Answer:

Metabolism

Explanation:

This is called Metabolism.

Metabolism is a combination of spontaneous chemical reactions which release non-spontaneous energy and chemical reactions requiring energy to proceed. In order to perform cellular processes, living organisms can take energy from food, nutrients or sunlight.

Answer:

True

Explanation:

Answer:

True

Explanation:

Hormones  are chemical messengers secreted into blood or extracellular fluid by one cell that affect the functioning of other cells. Most hormones circulate in blood, coming into contact with essentially all cells. However, a given hormone usually affects only a limited number of cells, which are called target cells.

Answer:

1.83 atm

Explanation:

Total pressure is the sum of partial pressures, so the pressure of hydrogen and pressure of oxygen add to equal 4.53 atm

4.53 = 2.7 + Po

Po = 4.53 - 2.7 = 1.83 atm