If yeast is given more sugar will they undergo more
cellular respiration than yeast that is given less sugar?

The solution can be described as a supersaturated solution.

Potassium chlorate is an inorganic compound composed of potassium, chlorine and oxygen. It is an oxidizing agent and a white crystalline solid at room temperature. It is used as a bleaching agent, in fireworks, matches, explosives, and fertilizers. It is also used to make chloric acid and in the production of paper, dyes, and textiles. Potassium chlorate is highly reactive and can be hazardous if not used properly. It is important to use personal protective equipment when handling it.
This means that the solution contains more of the dissolved compound than it can normally hold at the given temperature. In this case, the water is holding more potassium chlorate than it would normally be able to hold at the given temperature. As the temperature increases, the solubility of a substance increases, allowing more potassium chlorate to be dissolved.
To know more about potassium chlorate click-
https://brainly.com/question/1388701
#SPJ4

The freezing point of a solution containing 10.0 g of glucose C6H12O6 in 100 g of H2O is -0.53°C.

Freezing point is the temperature at which a liquid turns into a solid. It is the temperature at which a liquid's vapor pressure is equal to the atmospheric pressure. The freezing point of pure water is 0°C (32°F), while most other liquids have different freezing points. Some liquids, such as ethanol, have a lower freezing point than water, while others, such as propylene glycol, have a higher freezing point.

This is because the freezing point depression of a solution is dependent on the amount of solute present within a given amount of water. Glucose, being a solute, causes the freezing point of the solution to decrease.

To know more about freezing point click-

https://brainly.com/question/24314907

#SPJ4

Combination reaction is one of the five main categories of chemical reactions. reaction of decomposition. displacing response. Reaction with double displacement. Reaction to precipitation.

Combination, decomposition, single-replacement, double-replacement, and combustion are the five fundamental types of chemical reactions. chemical reaction, often known as the conversion of one or more chemicals (sometimes referred to as reactants) into one or more other compounds (the products).

Endothermic reactions are chemical processes in which the reactants absorb heat energy from their surroundings to produce products.  The reaction absorbs energy from its surroundings.

To know more about Reaction visit:-

https://brainly.com/question/28984750

#SPJ4

At 20°C, the solubility of NaCl in water is approximately 36.0 g/100 mL, or 36.0 g/L.

Solubility is the ability of a substance to dissolve in a liquid. It is a measure of how much of a substance can be dissolved in a given amount of a liquid. Solubility is affected by temperature, pressure, and the presence of other substances. Different substances have different solubilities; for example, sugar is more soluble in water than salt.

This means that at this temperature, 36.0 g of NaCl will dissolve in every 100 mL of water, or 36.0 g of NaCl will dissolve in every liter of water. The solubility of NaCl is temperature dependent, meaning that the solubility will change as the temperature changes.

To know more about solubility click-

https://brainly.com/question/23946616

#SPJ4

The average atomic mass of silver is approximately 108.3324. The mass of an atom is defined as its atomic mass.

The two isotopes of silver are Ag-107 (60 neutrons) and Ag-109 (62 neutrons).

To calculate the average atomic mass of silver, we need to multiply the mass of each isotope by its natural abundance, then add these values together.

Ag-107 has a mass of 107

Natural abundance of 51.83%,

so its contribution to the average atomic mass of silver is 107 * 0.5183 = 55.8391

Ag-109 has a mass of 109 and a natural abundance of 48.17%,

so its contribution to the average atomic mass of silver is 109 * 0.4817 = 52.4933

The average atomic mass of silver is the sum of these two values,

which is 55.8391 + 52.4933 = 108.3324.

So, the average atomic mass of silver is approximately 108.3324.

To learn more about atomic mass refer :

https://brainly.com/question/3187640

#SPJ1

The final pressure in the bottle for a monatomic gas is 1.20*10^3 Pa.

Given that,

lnitial temperature T = 328 K

Pressure P = 1.606 *10^5 Pa

After the gas expands adiabatically,

P' = 1.203 * 10^5 Pa

Temperature = T'

[tex]P^{f} = P' * (P'/P)^{1-gamma/gamma} \\P^{f} = P^{1/gamma}* P^{gamma-1/gamma}\\[/tex]

For monatomic gas (CV, m = 3R/2 , gamma = 5/3),

[tex]P^{f} = (1.203*10^5)^{3/5}*(1.606*10^5)^{(5/3-1)/5/3} \\ = 1117.27 * 116.59\\ = 1.30 * 105 Pa[/tex]

Part B:

For diatomic gas ( CV, m = 5R/2 , gamma = 7/5)

[tex]P^{f} = (1.203*10^5)^{5/7}*(1.606*10^5)^{(7/5-1)/7/5} \\P^{f} = 1.20*10^{3}Pa[/tex]

To know more about the Pressure, here

https://brainly.com/question/1367741

#SPJ4

Answer:

Explanation:

Oxygen has two allotropic forms, diatomic (O2) and triatomic (O3, ozone).

Apollo boasted to Cupid about how much larger his bow was. Apollo was offended, and Cupid hit him with a golden love arrow in retaliation, leading him to fall in love with the first person he saw.

Who was punished by Apollo for having a human lover?

Daphne, in her effort to escape him, was changed into a laurel, his sacred tree; Coronis was shot by Apollo's twin, Artemis, when she proved unfaithful; and Cassandra rejected his advances and was punished by being made to utter true prophecies that no one believed.5 days ago

Apollo unexpectedly advised Eros to leave warlike weapons to powerful gods like him and stick to magic instead after defeating Python, a terrible earth-dragon that lived near Delphi.

To know more about Cupid and apollo visit:-

https://brainly.com/question/19952705

#SPJ4

Acid in lemon juice reacts with metal containers to produce harmful chemicals. As a result, lemon juice is not kept in such containers.

What  is Acid ?

Acidic substances are typically easy to recognise by their sour flavours. A molecule that can donate an H+ ion and keep its energetic favorability even after losing H+ is a basic definition of an acid. Blue litmus paper is known to turn red when exposed to acids.

Bases, on the other hand, have a smooth consistency and a bitter flavour. A base that may dissolve in water is known as alkali. When these substances interact chemically with acids, salts are created. Red litmus has a history of becoming blue on bases.

The definitions of the terms acid and base vary depending on how one chooses to see the properties of acidity and basicity.

Lemon juice has a strong acidic flavor and can react with some metals. Lemon juice can corrode or rust metal when it comes into touch with it. This is so that iron oxide, a new chemical created by the reaction between the metal and the acid in lemon juice, can be formed.

Reddish-brown iron oxide is a less powerful material than pure iron. Iron oxide will keep combining with oxygen in the air over time to coat the metal in a thick film of rust.

Learn more about Acid from given link

https://brainly.com/question/25148363

#SPJ4

Sodium bicarbonate or sodium hydrogen carbonate also known as baking soda is an ionic compound because it contains ions in it.

Ionic bond which is also known as electrovalent bond is a type of linkage that is formed from the electrostatic attraction between oppositely charged ions in a chemical compound. Ionic bonds are the bonds that are formed when the valence (outermost) electrons of one atom are transferred permanently to another atom.

Baking soda or sodium bicarbonate (NaHCO₃) is an ionic compound since it consists of positive and negative ions. Ionic compounds are generally formed when a metal and a nonmetal combine and covalent compounds are usually formed by a combination of nonmetals.

Learn more about ionic bond from the link given below.

https://brainly.com/question/11924882

#SPJ4

Atomic-scale views and there clasifications:

The world of chemistry is filled with an incredible diversity of elements and compounds, each with its own unique properties and characteristics. Understanding the differences between pure elements, pure compounds, and mixtures can help us to better understand these materials, and how they interact with each other. In this essay, we will look at the defining characteristics of each type of substance, and explore their applications in the world of chemistry.

Pure elements are substances composed of only one type of atom. Examples of pure elements include oxygen, hydrogen, and iron. These elements have distinct chemical and physical properties, and because they are not combined with any other elements, they do not form compounds. Pure elements are essential for all life on Earth, as they form the building blocks of all biological molecules. They are also used in a wide variety of industries, from automobile manufacturing to consumer electronics.

Learn more about Atomic-Scale :

https://brainly.com/question/28295197

#SPJ4

The first reaction is addition reaction, second reaction is substitution reaction, and third reaction is elimination reaction.

In organic chemistry, addition reaction refers to an organic reaction in which two or more molecules combine to generate a bigger one (the adduct). An addition reaction occurs when two or more reactants combine to form a product without the loss of any atoms present in the reactants. A substitution reaction refers to a chemical reaction during which one functional group in a chemical compound is replaced by another functional group.  It is chemical reactions in which an atom, ion, or group of atoms or ions in a molecule is replaced by another atom, ion, or group. An elimination reaction refers to is a type of chemical reaction where several atoms either in pairs or groups are removed from a molecule. The removal usually takes place due to the action of acids and bases or the action of metals.

Note: The question is incomplete. The complete question is attached.

Learn more about Addition reaction:

https://brainly.com/question/1433809

#SPJ4

The concentration of a solution that has 15 grams of a solute and 5 liters of water is 3 g/L (grams per liter).

Concentration is the ability to focus one's attention on a task or activity, blocking out distractions and remaining focused on the task at hand. It is a skill that helps us to stay focused and avoid being easily sidetracked. Concentration is often thought of as being a key factor in academic success, as well as having an important role in the workplace. It can also be beneficial in everyday life, helping us to stay organized and on top of our commitments and responsibilities.

Concentration is a skill that can be developed and improved with practice. Strategies such as setting specific goals, breaking down complex tasks into smaller steps, and taking regular breaks can help to improve concentration. Additionally, reducing distractions such as background noise, social media, and other forms of entertainment can help to create an environment that is more conducive to concentration. Finally, making sure to get enough rest and exercise can also help to improve concentration.
It is calculated by dividing the mass of the solute (15 grams) by the volume of the solution (5 liters). To put it another way, the concentration of the solution is 3 grams of solute for every liter of water. This type of concentration is commonly expressed as either g/L or mg/L (milligrams per liter).
To know more about concentration click

https://brainly.com/question/23437000
#SPJ4

Answer:

hydrogen gas and chlorine

Explanation:

HCl is a chemical compound and aqueous solution form of HCl is a homogeneous solution

All the following are homogeneous mixtures except hydrogen gas and chlorine gas. Therefore, option A is correct.

A mixture is said to be homogeneous if its composition is constant throughout. Because the dissolved salt is evenly distributed throughout the whole salt water sample, the salt water described above is homogeneous.

It is single in composition throughout. There is only one phase of matter observed in a homogeneous mixture.

In an aqueous solution of hydrogen chloride gas, water serves as the solvent and the solute, respectively. Hence, hydrogen chloride is a homogeneous mixture rather than a compound.

When hydrogen chloride is dissociated and solvated in water to create hydrochloric acid, it counts as a homogeneous mixture.

Thus, option A is correct.

To learn more about the homogeneous mixture, follow the link;

https://brainly.com/question/24898889

#SPJ2

A group is the column in the periodic table of chemical elements while the period is the row in the periodic table of the elements.

The electron configuration an element describes how electrons are distributed in its atomic orbitals. The atomic number of the element is used.

According to this question;

Titanium is in group 4 and period 4 of the periodic table while Argon is in group 18 and period 3.

Learn more about groups and periods at: https://brainly.com/question/1995318

#SPJ1

There are distinct h1h1 & c13c13 nmr signals for each molecule, which are a.3, b.3, and c2.

All locations in benzene are identical to one another.As a result, all six hydrogen atoms produce just one signal for proton NMR, and all 6 carbon atoms produce just one signal in 13-C NMR.

These substances each produce three signals!Similar to the examples before, we can determine that two carbon atoms are equivalent by looking at the symmetry planes of a molecule.

To know more about compound visit:

https://brainly.com/question/13516179

#SPJ4

Therefore, the initial Bohr orbit's radius is r=0.53(1)22=0.265 A. The mean radius of an electron's orbit around the nucleus of a hydrogen atom in its ground state.

This radius' value, a, is determined by a physical constant that is roughly equivalent to 5.29177 x 10 -11 metres (m). Logic and Approach: Z is the first atomic number, or atom. Therefore, rn = 0.529n2 is the radius of the nth orbit. The Bohr orbit's(a0), a physical constant, is roughly equivalent to the distance between the nucleus and electron hydrogen in the ground state of a hydrogen atom. Due of its significance in the Bohr model of an atom, it bears Niels Bohr's name. 5.29177210903(80)1011 m is its value.

To learn more about Bohr orbit's, click here.

https://brainly.com/question/2285096

#SPJ4

Lewis dot structures, also known as electron dot structures, are diagrams that depict the chemical bonds that exist between atoms in a molecule. They also show the total number of lone pairs in each of the atoms that make up the molecule.

A Lewis Electron Dot Formula has one dot for each valence electron and the symbol of the element. The stages for articulating the electron dot formula are listed below. Make a skeletal structure with only the element symbols that shows a realistic bonding pattern.

Pick up every two electrons from each atom and simply throw them into a fictitious container known as an electron pot. To determine the number of bonds, use the N - A = S equation.

Learn more about Lewis here;

https://brainly.com/question/15570523

#SPJ

Nucleotide identifies the part of the DNA segment labeled as X in the given image.

Nucleotides are organic compounds composed  of phosphate and a nucleoside and are nitrogen containing base.

RNA is often single-stranded, unlike DNA. Instead of the deoxyribose present in DNA, the backbone of an RNA molecule is made up of alternating phosphate groups and the sugar ribose.

They similarly Consists of the following in RNA :

To know more about Nucleotides visit

https://brainly.com/question/16308848

#SPJ1

Answer:

C) Reaction with dilute action

Explanation:

Metals are good conductors of electricity and heat.

Non-metals are insulators that don't allow heat and electricity to pass through them. Hence, non-metals are bad conductors of electricity and heat.

H+ and Cl

Na+ and OH

Cu+ and SO4

A girl roller-skating has kinetic energy.

Kinetic energy is the energy of motion. It is the energy possessed by an object due to its movement. In this case, the girl roller-skating has kinetic energy because she is moving.

Potential energy is the energy an object possesses due to its position or configuration. It is the energy an object has stored within it, ready to be released. An object at rest has potential energy because it has the potential to be set in motion and does work.

So, in this case, the girl roller-skating has kinetic energy because she is moving, and not potential energy because she is not at rest.

To learn more about kinetic energy, check out https://brainly.com/question/24933254

In order to make Prussian blue paint, a variety of compounds must be mixed together. The pigment itself is made up of iron and potassium ferrocyanide. To this, calcium carbonate, oxygen, and nitric acid are added.

Calcium carbonate is a mineral that is commonly found in limestone and marble. It is also used in a variety of other products such as antacids and toothpaste. In the synthesis of Prussian blue paint, calcium carbonate is used to neutralize the nitric acid. This helps to create the desired color and also prevents the paint from being too acidic.

Oxygen is also added to the mix. Oxygen helps to accelerate the reaction between the iron and potassium ferrocyanide in order to create the desired color. It also helps to make the paint more durable and resistant to fading.

Finally, nitric acid is added to the pigment. Nitric acid helps to create the intense blue color of Prussian blue paint. It also helps to make the paint more resistant to light and water.

Learn more about Calcium carbonate at : https://brainly.com/question/13565765

#SPJ4

The freezing point of an aqueous solution containing 80.0 g of NaCl will be -21.2 °C.

An aqueous solution is a solution that consists of a solvent and solute, where the solvent is water. Water is able to dissolve many different types of molecules and ions, making it an ideal solvent for many applications. Aqueous solutions are ubiquitous in nature and form the basis of many biological processes. In chemistry, aqueous solutions are used as a medium to conduct chemical reactions, as they allow for the solubilization of reactants and products.

This is because NaCl is an electrolyte and increases the freezing point of a solution by lowering the vapor pressure. When NaCl dissolves in water, it separates into individual ions and the ions interact with the water molecules, making it harder for the water molecules to escape into the vapor phase, which in turn increases the boiling point and decreases the freezing point. The freezing point depression of an aqueous solution containing 80.0 g of NaCl can be calculated using the formula ΔTf = Kf·m, where Kf is the molar freezing point constant for water and m is the molality of the solution. The molality of the solution can be calculated by dividing the mass of the solute (NaCl) by its molar mass and then dividing that by the mass of the solvent (water). So, the molality of the solution is 0.522 mol/kg and the freezing point depression is -21.2°C.

To learn more about aqueous solution
https://brainly.com/question/19587902
#SPJ4

When the pressure of a liquid is increased, so is the number of molecules that can fit into a given space.

Freezing point is the temperature at which a liquid turns into a solid. The freezing point of a substance is the temperature at which its molecules stop moving and form into a solid crystal. Generally, the freezing point of a liquid is lower than its boiling point. For example, water freezes at 32°F (0°C) and boils at 212°F (100°C).

This compression of molecules increases the interactions between them and weakens the intermolecular bonds that hold them together. This weakening of the bonds reduces the amount of energy needed to separate the molecules, causing the freezing point to decrease. In other words, when the pressure of a liquid increases, the molecules are more tightly packed and the freezing point decreases.

To know more about freezing point click-

https://brainly.com/question/24314907

#SPJ4

The opposite process of freezing is-Boiling

Boiling is the quick evaporation of a fluid that occurs when it is heated to the boiling point, which is the temperature when the liquid's vapour pressure equals the i.e. changes on the liquid by the outer air. Freezing is a phase transition that occurs when the heat of a liquid falls below its freezing temperature. According to the internationally accepted definition, freezing refers to the crystallisation phase change of a liquid or even the strimmer of a substance, which is usually caused by cooling. In science, boiling occurs when a liquid turns into a gas, forming bubbles within the liquid volume. Water is the most commonly used boiled liquid in cooking.

To learn more about Boiling here:

https://brainly.com/question/2153588

#SPJ4

A reaction reaches dynamic equilibrium at a given temperature when the relative amounts of reactants and products are constant and rate fwd = rate rev. Option D is the correct answer.

This refers to the state of a given system in which the reversible reaction taking place ceases to change the ratio of reactants and products, but there is a movement of substances between the reactants and the products.

Hence, a reaction reaches dynamic equilibrium at a given temperature when reactants change into products and products change into reactants even after equilibrium is achieved. But the rate of forward and backward reactions are the same.

Learn more about dynamic equilibrium on

https://brainly.com/question/2363073

#SPJ1

Ice melting is a physical transformation rather than a chemical reaction. The addition of heat energy causes the phase of ice to transition from solid to liquid during melting. However, there is no chemical reaction taking place while it is melting, therefore the molecular composition remains unchanged.

Endothermic Reaction: An endothermic process is one in which additional heat is needed to complete the reaction. Ice melting is an example.

A physical process called melting or fusing causes a substance to change its phase from a solid to a liquid. This happens when the solid's internal energy rises, usually as a result of the application of heat or pressure raises the material's temperature to the point of melting.

To know more about Endothermic Reaction visit:-

https://brainly.com/question/23184814

#SPJ4

Six electrons occupy the outermost shell in the electron configurations of the elements in Group 16 of the periodic table, which distinguish them from other elements.

To Learn more About periodic table, refer To:

https://brainly.com/question/15987580

#SPJ1