. If you apply heat to the copper bar, its density will

Answer:

Recall the colligative properties of freezing point depression and boiling point elevation.

In proportion to the molality product of the solute, (

i

m

), the boiling point will raise and the freezing point will decrease.

Now, consider tap water. You know this!

Is tap water pure water? Of course not! It's a solution of many ions of metals or other inorganic compounds.

Hence, it has a varied boiling and melting point, by definition.

Explanation:

The colligative properties like the boiling point elevation and freezing point depression depend on the solute concentration. The boiling point of the water will increase while the freezing point will decrease.

Colligative properties are the attributes that depend on the amount or the solute concentration rather than on the type or identity of the solute particle. They include freezing point depression, lowering of vapor pressure, osmotic pressure, and boiling point elevation.

The boiling point elevation is the increase of the solvent's boiling point by the addition of the solute. Potassium chloride​ is a salt and a non-volatile solute that increases the boiling point of the solution.

The freezing point depression is one of the colligative properties that states the direct relationship between the molality and the freezing point of the solvent. As potassium chloride is a non-volatile solute it decreases the freezing point of the substance.

Therefore, the boiling point will increase but the freezing point will decrease after the addition of potassium chloride.

Learn more about colligative properties here:

https://brainly.com/question/1350420

#SPJ2

Answer:

109.575

Explanation:

Answer: i would do the mineral formed when a hot water solution cooled because you said that a mineral forms in water heated by magma inside Earth.

Explanation:

The answer would be C

Explanation:

When magma cools down it will change into a rock type so the answer would be C.

Answer:

0.00004

Explanation:

i dont have one its just i know

Answer:

c. stays the same, changes

Explanation:

temperature and heat go hand in hand, however while the change of state occurs, the temperature remains the same while the heat increases since the heat input is constant.

As a change of state takes place, heat and temperature: C. stays the same, changes.

Matter can be defined as anything that has mass and occupies space. Thus, any physical object or substance that is found on earth is typically composed of matter.

Since all matter are made up of atoms, they have a property of existing in three (3) distinct states and these include;

Generally, matter changes state when heat (thermal energy) is released or absorbed with a corresponding change in its temperature.

In conclusion, at the point when the change of state is taking place, heat stays the same and temperature changes.

Find more information: https://brainly.com/question/17203857

Answer:

hope it helped you.

Explanation:

The properties of matter that do not depend on the size or quantity of matter in any way are referred to as an intensive property of matter. Temperatures, density, color, melting and boiling point, etc., all are intensive property as they will not change with a change in size or quantity of matter.

Answer:

1.) land

2.) water

3.) warmer

4.) rises

5.) sea

Explanation:

Hot air rises, and land heats up first.

Answer:

Here are the answers:

1.) land

2.) water

3.) warmer

4.) rises

5.) sea

Explanation:

During a day at the beach, the land heats up faster than the water. Because of this, the air over land rises over the land and the cooler, more dense air, blows into the ocean, creating a sea breeze.

Answer:

True

Explanation:

Sorry if this is late lol

Answer:

The answer is True.

Explanation:

Did not copy

Answer:

Explanation:

A proton has a mass of approximately 938 MeV/c2, of which the rest mass of its three valence quarks contributes only about 9.4 MeV/c2; much of the remainder can be attributed to the gluons' QCBE.

Answer:

Spits

Explanation:

Deposit by waves include beaches. They may shift along the shoreline due to longshore drift. Other wave deposits are spits, sandbars and barrier islands

Answer: D

Explanation:

Answer:

Odessium (Od) has an average atomic mass of 284.45

Explanation:

Average mass is calculated from the isotopes of an element weighted by their relative abundance.

To calculate the relative average mass, you need to find the % of each isotope and use these to calculate the relative average mass

Add all 3 answers to get the relative average mass

Answer: С . The temperature increases by about 12°C and then decreases by about 12°C.

Explanation:

Temperatures around the world have been on the rise since the Industrial revolution as humans clog the planet with Carbon Dioxide and other pollutants. This had led to a rise in temperatures that has seen ice levels fall and sea levels rise around the world.

Temperature fluctuations on the other hand are not a new thing. Studies show that in Antarctica temperatures from about 440,000 years ago to about 340,000 years ago increased by 12°C and then decreased by about 12°C.

Answer:

  C.  The temperature increases by about 12°C and then decreases by about 12°C.

Explanation:

The attached shows ice core data that indicates the time period of interest was about the period of one full cycle of climate change. Temperature went up, then went down again to about its original level. The range of change was on the order of 12 °C.

Answer:

D

Explanation:

According to this question, each model of molecules in the options contains spheres of different colors and sizes representing different types of atoms. The atoms of the same element are the spheres of same color and size while atoms of different element are of different color or size.

Therefore, the model showing a molecule of a substance that is made up of three elements is model D because it is made up of three distinct spheres representing atoms of each element.

- The red sphere is the atom of the first element

- The big dark sphere is the atom of the second element

- The small white sphere is the atom of the third element

Answer:

D

Explanation:

A small pebble sinks in water because its density is greater than the density of water. Density is a measure of how much mass is packed into a given volume. If an object is denser than the liquid it is placed in, it will sink.

When a pebble is dropped into water, the water exerts an upward force called buoyancy. This force opposes the weight of the pebble, and if the pebble is less dense than water, it will experience an upward force greater than its weight and float.

However, if the pebble's density is greater than that of water, the downward force due to its weight will be greater than the upward buoyant force, causing it to sink.

Learn more about Density, here:

https://brainly.com/question/29775886

#SPJ6

Answer:

Principle quantum number.

Explanation:

Answer:

CH₃CH₂CH₂COOH.

Explanation:

To know which option is correct, let us hydrolysed the given ester. This is illustrated in the attached photo.

Hydrolysis of ester involves breaking the ester bond by a water molecule to produce the corresponding alcohol and carboxylic acid.

From the reaction given in the attached photo, we can see that the carboxylic acid needed to produce the desired ester is butanoic acid, CH₃CH₂CH₂COOH.

Answer:

B) In order to accurately identify the source of any blood. In order to thoroughly and accurately recreate the crime scene.

Answer:

Argon {Ar}

Explanation:

The noble gas used for a condensed electron configuration is the one before the element which you are configuring.

In this case, the element (Mn) is manganese

The noble gas that is before this element is Argon which is the row above it

so your configuration would be {Ar} 3d^5 4s^2

Answer:

2.878 (w/w)%

Explanation:

The reaction of NH3 with HCl is:

NH3 + HCl → NH4Cl

That means 1 mole of ammonia reacts per mole of HCl. The moles of HCl that reacts = Moles of ammonia are:

14.22mL = 0.01422L * (0.1063mol HCl / L) = 0.001512 moles HCl = Moles ammonia

In mass:

0.001512 moles NH3 * (17.031g / mol) = 0.02574g of NH3 in the solution.

The concentration in weight percent of the diluted solution is:

0.02574g of NH3 / 4.373g * 100 = 0.5887 (w/w)%

This is the concentration of the diluted solution that was diluted from 10.151g to 10.151g + 39.466g = 49.617g

-Assuming density of water = 1g/mL-

The solution was diluted:

49.617g / 10.151g = 4.888 times.

That means the concentration of NH3 in the original cleaner is:

0.5887 (w/w)% * 4.888 =

Answer:

H3O^+ < HClO2 < H3PO4< HCOOH < H2PO4^-<CIO2^-<H2O< HCOO^-

Explanation:

The pH of a solution refers to the negative logarithm of it's hydrogen ion concentration. Generally, the hydrogen ion concentration of an acid is always greater than that of its conjugate base. Hence, the conjugate acid always has a lower pH than the conjugate base.

This can be seen in the species, H3O^+ and H2O, HClO2 and ClO2^- etc.

Answer: Here u go!

Explanation:

The electron cloud of argon is thus larger and more polarized, able able to express mawr inter molecular forces Vander Waals forces, which results in a higher boiling point due to these increase forces. Due to this, the boiling point of argon is higher are gone. We can see its boiling point is 87.2 Kelvin's, whereas a neon and spoiling point is 24.5.

Hope this helps!

Explanation:

Argon has an atomic number of 18, while neon has an atomic number of 10.

The atomic radius is comprised of the atom’s nucleus and electron cloud. As you go down on the periodic table, the effective nuclear charge decreases. This results in more screening of the electrons

from the nucleus (decreasing the attraction between the nucleus and the electrons) resulting in a larger atomic radius.

However, because they’re both noble gasses, the size difference in this case can be easier described by the number of particles in each atom.

Argon has 18 protons, 18 electrons and 22 neutrons.

Neon has 10 protons, 10 electrons and 10 neutrons.As you can see, argon has more “stuff.”

The increase in protons and electrons in particular results in a larger electron cloud, which means a much larger atomic radius than in neon.

i hope it helps u :)

Potassium acid phthalate will serve as our primary standard. This is a large molecule (KHC8H4O4) with a molar mass of 204.2 g/mol. Instead of writing the whole formula, we abbreviate it as KHP, where "P" stands for the phthalate ion, C8H4O42-, not for phosphorus. KHP is an acidic substance, with the ionizing hydrogen being set forward in the formula for emphasis. Therefore, KHP is monoprotic and will react with NaOH in a simple 1 to 1 relationship according to the following equation:

Answer:

smooth, skeletal, cardiac

contract

actin and myosin

Explanation:

edge

Answer:

The correct answers are

smooth, skeletal, cardiac

contract

actin and myosin

Answer:

So... for the element of SODIUM, you already know that the atomic number tells you the number of electrons. That means there are 11 electrons in a sodium atom. Looking at the picture, you can see there are two electrons in shell one, eight in shell two, and only one in shell three.

Explanation:

brainliest pleaseeee <3

Answer:

so there would be 2 electrons because

Explanation:

sodium has 11 electrons but if you look at the shels it onl has one electron (from the image im looking at) and the other shell only have one so theres 2 electrons

Answer:

Magnesium forms a positive ion and wants to lose electrons. Bromine forms a negative ion and wants to gain electrons.

Answer:

Magnesium forms a positive ion (Mg²+) and wants to lose two electrons.

Bromine forms a stable noble gas electronic

configuration when it gains one electron. Thus we find

magnesium as 2+ cation and bromine as a 1- anion in a

1:2 ratio in the compound .

Also, bromine forms a negative ion.

Answer:

D. The sun's light helps plants grow

Explanation:

This is a scientific observation, because it is describing the structure of a living thing.