Answer:
The first step of the problem solving process is to identify and define the problem. The second step, which is to analyze the problem, involves gathering information, sorting through relevant and irrelevant information, and evaluating the source of the problem by asking the Five W's: who, what, where, when, and why.
When starting a featheredge, sandpaper grit is increased in steps of up to
A) 200
B) 150
C) 100
D) 50
grit at a time.
Answer: C: 100
Explanation: When starting a featheredge, sandpaper grit is increased in steps of up to 100 grits at a time.
Carolina wants to determine which services are running on the Linux servers in a certain subnet. Which of the following tools would best perform this task?
a. nmap
b. ifconfig
c. telnet
d. ping
Answer: nmap
Explanation:
The best tool to use for determining which services are running on Linux servers in a certain subnet is nmap. Nmap (short for "Network Mapper") is a network scanning and security tool that can be used to discover and map networks, as well as to identify the services that are running on specific servers or devices.
Nmap can be used to scan a subnet and identify the hosts and devices that are connected to it, as well as to determine the services that are running on those devices. This can be useful for identifying potential vulnerabilities or security risks, as well as for understanding the network and its capabilities.
In contrast, the other options listed (ifconfig, telnet, and ping) are not as well-suited to the task of determining which services are running on Linux servers in a subnet. Ifconfig is a command-line utility that is used to configure network interfaces, but it does not provide information about services running on servers. Telnet is a protocol for connecting to remote servers, but it does not provide information about the services that are running on those servers. Finally, ping is a tool for testing network connectivity, but it does not provide information about services running on servers.
please help i am give brainliest i really need help guys no links please ???
can someone create a 2-minute presentation about wind
also i am giving 50 points
no dam links
if you put links i will hack your brainiy account
Wind is the flow of gases on a large scale. On the surface of the Earth, wind consists of the bulk movement of air. Winds are commonly classified by their spatial scale, their speed, the types of forces that cause them, the regions in which they occur, and their effect. Wind is the flow of gases, here on Earth it refers to the movement of air.
It is caused by differences in air pressure. ...
Short bursts of wind moving at high speeds are known as gusts.
Depending on their strength, winds can be known as a breeze, gale, storm or hurricane.
will mark brainliest!
what is ethics and why is it so important? How does it affect the manufacturing processes of specific goods
Ethics in production is a subset of business ethic that is meant to ensure that the production function or activities are not damaging to the consumer or the society. Like other ethics there is a certain code of conduct or standards to be followed, however ensuring that the ethics are complied with is often difficult.
i HOPE IT'S HELPAnswer:
Ethics serve as a guide to moral daily living and helps us judge whether our behavior can be justified. Ethics refers to society's sense of the right way of living our daily lives. It does this by establishing rules, principles, and values on which we can base our conduct.
Explanation:
Business ethics help ensure a good reputation for your company. ... When you have a reputation for consistently being ethical in how you source and build products, and treat employees, customers and the community, more people will want to do business with you. Even social media ethics is important for your reputation.
How do engineers deal with liquefaction when building a very tall building?
Answer:
Engineers can use a variety of techniques to prevent or mitigate the effects of liquefaction when building a very tall building. Liquefaction is a phenomenon that occurs when soil loses its strength and stiffness due to increased pore water pressure. This can cause the ground to become unstable, potentially leading to significant damage to buildings and other structures. To prevent liquefaction, engineers may use a combination of techniques, including:
Giving away points hope they help with your questions
How does the strength of the bar magnet effect the induced current?
Answer:
your answer is c does not effect current
A student is asked to build a model of an atom with 6 protons and 6 electrons. The student is then asked to make an identical model of the same arom but make it an ion. Ro be successful in this project, the student will:
In the above chemistry prompt, where a student is asked to build a model of an atom with 6 protons and 6 electrons. The student is then asked to make an identical model of the same atom but make it an ion. To be successful in this project, the student will: " Place the electrons in the center of the model and distribute them around the protons."
Why are models important in chemistry?Models may be thought of as thinking tools that aid in the formation of explanations. They are also helpful simplifications to improve comprehension.
In the chemistry classroom, physical modeling may help students visualize concepts such as molecular systems, structure and bonding, atomic structure, and collision theory.
Learn more about Chemistry:
https://brainly.com/question/10091720
#SPJ1
Depending on the economy, financial institution, and your credit history, interest rates commonly range from
Answer:
When interest rates increase, it affects the ways that consumers and businesses can.called the Fed—cut the target range for its benchmark interest rate by 0.25%.Why does the Fed cut interest rates when the economy begins to struggle—or raise.The prime rate represents the credit rate that banks extend to their most.
Explanation:
describe 3 examples of biases in design
As we mature, we come to understand that not everything should be perceived and thought of in the same manner. The design term for this is “bias.” increasing awareness and preventing ourselves or our organizations from being victims of such bias.
What are the biases in design?Confirmation bias, sampling bias, and brilliance prejudice are three examples of biases that might affect our ability to objectively assess information.
To help us better grasp how cognitive biases affect our daily life, Jono Hey of Sketchplanations talks us through some examples.
Therefore, Designers must concentrate on connecting with users without letting their connection be influenced by their own or other people's opinions.
Learn more about design here:
https://brainly.com/question/6472622
#SPJ1
Technician A states that a scan tool can read
almost every system on a vehicle and provide
valuable data in identifying problems. Technician
B states that electronic steering system faults set
a diagnostic trouble code that can be retrieved by
a scan tool. Who is correct?
Select one:
A. Technician A
B. Technician B
C. Both A and B
D. Neither A nor B
Answer:
your answer is C.both A and B
Air-break switches are also known as
A soft-limit Switches
B SPST Switches
C knife Switches
D gap Switches
Which of the following types of cables might be used to run from cubicles into a drop ceiling and then routed across to an IDF?
a. SCADA
b. plenum
c. backbone
d. EMI
Answer:
69420
Explanation:
I need help with this, question thank you so much
Answer:
Explanation:
beeeeeeep beeeeeeeeeeeeeeeeeeeep
Answer:
what happened here?
hahaha
make list of possible projects you would like consider doing in the place you live and could be a simple paint job or a bookcase or piece of furniture
plz help
Answer:
Make a model of an highway to study the physics and how the road and velocity of a car.
does anyone have the answers to the modern carpentry book review questions for chapter 21,22, and 23
This is for a history assignment, but it is an engineering question: How long is the length, width, and height of an average power plant?
The length, width, and height of an average power plant varies. The size of a power plant can vary greatly depending on the type of technology it uses and the amount of power it generates.
Some power plants, such as hydroelectric dams, can be very large and span several kilometers in length. Other types of power plants, such as natural gas or coal-fired plants, are typically smaller and may only be a few hundred meters in length.
What is the power plant size about?The size of a power plant may also depend on the location in which it is built. For example, a power plant built in a dense urban area may be smaller in size due to space constraints, while a power plant built in a more rural area may be larger to take advantage of available land.
In terms of the height of a power plant, again this can vary greatly depending on the type of technology being used. Some power plants, such as nuclear or coal-fired plants, may have tall smokestacks that are several hundred meters tall.
Therefore, Other types of power plants, such as solar or wind farms, may have much shorter structures, as they do not require the same type of large equipment.
Learn more about power plant from
https://brainly.com/question/2005734
#SPJ1
You are developing a mind map for measuring the viscosity of fluid. At which stage in the process will you specify the equipment needed for the experiment?
Connecting the subtopics fo the central idea
Defining the lower-level subtopics
Creating the image
Defining the subtopics
Answer:
Defining the subtopics
Answer:
Defining the subtopics
Explanation:
definition of environment in design and technology
Answer:
Environment means our surroundings. Our surroundings consist of naturally occurring things like the air, rivers and trees and it consists of things that are built by humans. We call these two environments: "the natural environment" and the. "built environment".
Explanation:
15 POINTS! Help.
What might happen if a systems engineer overlooked a detail that may have been discovered by a manufacturing engineer? Explain using an example.
Answer: it would overload
Explanation:
Answer:
It is going to overload
Explanation:
Hope this helps have a great day!
FDR is regarded as one of our greatest presidents but he made some real errors, what were they? Why? Is it fair to blame him for these considering the magnitude of what he faced?
Answer: The Second Bill of Rights was proposed by United States President Franklin D. Roosevelt during his State of the Union Address on Tuesday, January 11, 1944. ... Farmers' rights to a fair income. Freedom from unfair competition and monopolies
Explanation:
Three (3) Types of Section Views used in engineering drawing are
Plan, Front and End
Orthographic, Isometric and Oblique Section
Full, Half and Offset Section
None of the above
Answer:
none of the above
Explanation:
plen ,side and elevation are the three section views
Please help i am give brainliest i really need help guys no links please ???
can someone create a 2-minute presentation about wind
also i am giving 40 points
no dam links
if you put links i will hack your brainiy account
Explanation:
The wind is an actual form of solar energy. winds are caused by the heating of the atmosphere by the sun, the rotation of the earth, and the earth's surface irregularities. The wind is capture in a wind turbine which provides a renewable energy source, the wind makes the rotor spin, as the rotor spins the movement of the blades drives a generator that creates energy, also known as wind power. The average wind efficiency of turbines is between 35-45%.
Advantages of wind power
- Wind power is cost-effective
- wind creates jobs
- wind enables US industry growth and US competitiveness
-it's a clean fuel source
Sarah took the advertising department from her company on a round trip to meet with a potential client. Including Sarah a total of 10 people took the trip. She was able to purchase coach tickets for $130 and first class tickets for $1140. She used her total budget for airfare for the trip, which was $7360. How many first class tickets did she buy? How many coach tickets did she buy?
The number of class tickets she did buy is 3. The number of coach tickets she did buy is 8.
What are tickets?Tickets are a piece of paper that contains all the information for someone to enter somewhere or travel.
x= number of coach tickets and y = number of first-class tickets.
$210x + $1200y = $10,230 (cost of a coach ticket plus the cost of first-class tickets is the total budget)
The second equation for y to get y = 11 - x, then plug that into the first equation and solve for x:
$210x + $1200(11 - x) = $10,230
$210x + $13,200 - $1200x = $10,230
-$990x + $13,200 = $10,230
-$990x = $2,970
x = 3
Sarah bought x = 3 coach tickets. The seconds equation and solves for y:
3 + y = 11
y = 8
Thus, the class tickets she did buy are 3 and the coach tickets are 8.
To learn more about the trip, refer to the link:
https://brainly.com/question/26771212
#SPJ1
Which of the following distinguishes why “biosolid” is another name for fertilizers made from sewage sludge?
Answer:
Because human waste is biodegradable
Explanation:
Since sewage sludge or human waste is an environmentally friendly and biodegradable, so means of processing human waste, it is called "biosolid" when used as fertilizer. Sewage is a semi-solid substance formed during the sewage treatment process and during process human waste can be easily biodegrade.
Which of the following tools utilizes a bubble of air floating in liquid?
A. level
B. sliding T bevel
C. tri-square
D. square
Answer:
Option A
A level tool utilizes a bubble of air floating in liquid
Explanation:
A level tool (spirit level, bubble level) utilizes a bubble of air floating in liquid. This is a mechanism to check whether the surface is horizontal (level) or vertical (plumb). The air bubble must always be at the center with in the two level indication line marks.
Hence, option A is the right answer
Primary power is the electrical supply from the power company.
False
True
Primary power is the electrical supply from the power company. The given statement is True.
How do main and secondary powers differ?Primary distribution lines, often known as primaries, are those located on the high voltage side of the distribution transformer. Secondary distribution lines, or secondaries, are those found on the low-voltage side of the distribution transformer. Primary energy (PE) is a type of energy that can be found in nature that hasn't undergone any artificially designed conversion procedures. It is the energy that is present in unprocessed fuels and other energy sources, such as trash, that are introduced into a system.
Renewable or nonrenewable sources can be used for primary energy. Primary energy sources come in a variety of shapes and sizes, and they can be either nuclear, fossil (such as coal, oil, and natural gas), or renewable (such as wind, solar, geothermal, and hydropower).
Learn more about Power here: https://brainly.com/question/25543272
#SPJ1
Calculate the amount of current flowing through a 75-watt light bulb that is connected to a 120-volt circuit in your home.
Answer:
I = 0.625 A
Explanation:
Given that,
Power of the light bulb, P = 75 W
Voltage of the circuit, V = 120 V
We need to find the current flowing through it. We know that, Power is given by :
[tex]P=V\times I[/tex]
I is the electric current
[tex]I=\dfrac{P}{V}\\\\I=\dfrac{75\ W}{120\ V}\\\\I=0.625\ A[/tex]
So, the current is 0.625 A.
Please answer this asap
option 2 bud becasue of how its angles
Answer:
option 2 :
F.V and S.V
Explanation:
that's the correct answer
At the operations level of industrial internet what is not critical
At the industrial internet's operational level, Time is not crucial.
Explain about the industrial internet?An interconnected system of sensors, instruments, and other devices is referred to as the "industrial internet of things" and is utilized in industrial computer applications such as production and energy management.
Increased efficiency The main benefit of IIOT is the ability for industries to automate and increase their operational efficiency. Robotics and automated machinery can work more accurately and effectively, improving output and helping businesses streamline their processes.
Due to its emphasis on machine-to-machine (M2M) connectivity, big data, and machine learning, the IIOT enables businesses and industries to function more effectively and dependably.
Examples of IIOT devices in an IIOT network include sensors, computers, and machinery used in manufacturing, agriculture, and mission-critical applications, such as nuclear and energy management systems.
To learn more about industrial internet refer to:
https://brainly.com/question/29691498
#SPJ1