The following containers have the same number of molecules and temperature. Which container has the most collisions?

Answer:

NaCl and water: Ion - Dipolo forces

NaCl and Hexane: Ion-ion force between Na+ and Cl− ions and London dispersion force between two hexane molecules

Explanation:

NaCl and water:

The ion-dipole force is established between an ion and a polar molecule.  Polar molecules are dipoles, they have a positive end and a negative end.

H2O has an important charge separation in its atoms (the H has a positive partial charge and the O has a negative partial charge) and this causes permanent electrical dipoles in the water molecules.

Sodium chloride is an ionic compound formed of positive and negative charge ions, Na + and Cl-. Depending on their charge, these ions will be attracted to opposite charges in the water molecules (H attracts chloride ions and O attracts sodium ions), causing the salt to dissolve in water.

Explanation:

Answer:

A heterogeneous mixture is a mixture in which the composition is not uniform throughout the mixture

Answer:

Question 16: I'm not sure but most likely #3

Question 17: #4

Explanation: Hope this Helps

Answer:

A for first one and second one is A

Answer:

The agricultural revolution increased agricultural production and technological advancements. I think this led to population growth because the increase in labor and the increase in technologies increased human deveolpment. The revolution also allowed farmers to grow and produce more food and transport it to where it was needed.

Explanation:

Answer:

c. 10–14[H3O+]

Explanation:

On a calculator, calculate 10-8.34, or "inverse" log ( - 8.34). Example: What is the pOH of a solution that has a hydroxide ion concentration of 4.82 x 10-5 M? The hydroxide ion concentration can be found from the pOH by the reverse mathematical operation employed to find the pOH.

Explanation:

Sonic is my bf forever, back off

Answer:

oof I always lose on video games so I just quit

Explanation:

A) Atoms are neither created nor destroyed

number of atoms in the reactant is always equal to the number of atoms in the product and hence, option A is the right answer

Answer:

Explanation:

The answer is true.

Answer:

true

Explanation:

acids have ph which is less than 7 and base have ph greater than 7

Answer:

71.6 g of Ru(CO)₅ is the maximum mass that can be formed.

The limiting reactant is Ag

Explanation:

The reaction is:

RuI₃ (s) + 5CO (g) + 3Ag (s) → Ru(CO)₅ (s) + 3AgI (s)

Firstly we determine the moles of each reactant:

169 g . 1mol /481.77g = 0.351 moles of RuI₃

58g . 1mol /28g = 2.07 moles of CO

96.2g . 1mol/ 107.87g = 0.892 moles

Certainly, the excess reactant is CO, therefore, the limiting would be Ag or RuI₃.

3 moles of Ag react to 1 mol of RuI₃

Then 0.892 moles of Ag may react to (0.892 . 1) /3 = 0.297 moles

We have 0.351 moles of iodide and we need 0.297 moles, so this is an excess. In conclussion, Silver (Ag) is the limiting.

1 mol of RuI₃ react to 3 moles of Ag

Then, 0.351 moles of RuI₃ may react to (0.351 . 3) /1 = 1.053 moles

It's ok, because we do not have enough Ag. We only have 0.892 moles and we need 1.053.

5 moles of CO react to 3 moles of Ag

Then, 2.07 moles of CO may react to (2.07 . 3) /5 = 1.242 moles of Ag.

This calculate confirms the theory.

Now, we determine the maximum mass of Ru(CO)₅

3 moles of of Ag can produce 1 mol of Ru(CO)₅

Then 0.892 moles may produce (0.892 . 1) /3 = 0.297 moles

We convert moles to mass → 0.297 mol . 241.07g /mol = 71.6 g

Answer:

yayyy! proud of u

Explanation:

Answer:

[tex]53.55gNO[/tex]

Explanation:

Hello there!

In this case, according to the given chemical reaction, it is possible for us to calculate the produced grams of nitrogen monoxide by starting with 25.0 g of nitrogen via their 1:2 mole ratio and the molar masses of 30.1 g/mol and 28.02 g/mol, respectively and by some stoichiometry:

[tex]=25.0gN_2*\frac{1molN_2}{28.02gN_2}*\frac{2molNO}{1molN_2}*\frac{30.01 gNO}{1molNO}\\\\=53.55gNO[/tex]

Best regards!

Answer:

4. KCl(s)

Explanation:

KCl is an ionic salt that dissolves in water to form a KCl aqueous solution.

A solution is defined as the homogeneous mixture of one or more solutes dissolved in a solvent. Here in the saturated solution of potassium chloride, the solute is KCl. The correct option is 4.

A solute is defined as the substance which is dissolved in a solution. In a solution the amount of the solute present is always smaller than the amount of the solvent. For example in a salt solution, salt dissolves in water and therefore salt is the solute.

The particles of the solute present in a solution cannot be seen by our eye. The solute from a solution is not possible to separate by filtration. In an unsaturated solution, the concentration of the solute is much lower than that of the concentration of the solvent.

A solution is a combination of the solute and the solvent.

Thus the correct option is 4 - KCl.

To know more about solute, visit;

https://brainly.com/question/13812915

#SPJ2

Answer:

1.175 M

Explanation:

The balanced reaction is:

First we calculate how many moles of KOH reacted, using the given concentration and volume:

Then we convert moles of KOH to moles of H₂SO₄, using the stoichiometric coefficients of the balanced reaction:

Finally we calculate the molarity of the acid:

Answer:

1. False. White blood cells do.

2. False. Every seven years your cells are in the process of dying and being replaced. Although some cells don't die but your cells don't last for more than a period of 7 years.

3. True.

4. True.

5. False. Explained in 2.

Explanation:

Answer:

B

Explanation:

Answer:

Calculate the pH of 0.010 M HNO2 solution. The K, for HNO2 is 4.6 x 104

Answer: pH = 2.72

Ozone gas can be smelled in the air after a thunderstorm as a result of  reactions between oxides of nitrogen and volatile organic compounds.

Ozone gas can be produced due to chemical reactions between oxides of nitrogen and volatile organic compounds. This reaction occurs when pollututed gas is emitted from vehicles react and other activities with each other in the presence of sunlight.

So we can canclude that Ozone gas can be smelled in the air after a thunderstorm as a result of  reactions between oxides of nitrogen and volatile organic co

Learn more about ozone here: https://brainly.com/question/520639

Answer:

Solubility

Explanation:

Solid LiCl dissolves in water because:

A.  The Li+ ions are attracted to the oxygen atom (partially -ve charge) of water.

D.  The Cl– ions are attracted to the hydrogen atom (partially +ve charge) of water.

The better particle diagram was drawn by Student 1 because when LiCl dissolves in water, it dissociates into Li+ and Cl− ions causing an increase in entropy.  The correct option is option A.

The maximum amount of a material that may dissolve in another is known as its solubility. A saturated solution is created when a solvent can dissolve its maximum quantity of solute before reaching equilibrium.

A supersaturated solution results when extra solutes are dissolved past the equilibrium solubility limit under specific circumstances. More solute cannot raise the concentration in the solution past saturation or supersaturation. Instead, the extra solute begins to separate from the solution as a precipitate. The better particle diagram was drawn by Student 1 because when LiCl dissolves in water, it dissociates into Li+ and Cl− ions causing an increase in entropy.

Therefore, the correct option is option A.

To learn more about solubility, here:

https://brainly.com/question/14366471

#SPJ6

Answer:

We can Observe that the Compound does not have the Positive or the negative Charge thus it is Neutral. Hence, the Oxidation Number of the Compound Will be 0. Thus, the Highest Oxidation Number of the X is 6.

The oxidation state/number for X in XO3 is determined as +6.

The oxidation state/number for X in XO3 is determined from the overal charge of the compound and the charge of oxygen atom.

The oxidation state of "X" is calculated as;

X + (3 x -2) = 0

X - 6 = 0

X = +6

Thus, the oxidation state/number for X in XO3 is determined as +6.

Learn more about oxidation state here: https://brainly.com/question/14426389

#SPJ2

Answer:

c substance

Explanation:

Matter is never destroyed or created in chemical reactions. The particles of one substance are rearranged to form a new substance. The same number of particles that exist before the reaction exist after the reaction.

Answer:

iodous acid

Explanation:

iodous acid would also be known as HIO2

Answer: C.

Explanation:

two H nuclei fused into one He nucleus

Answer: A!

Explanation: just did it

Answer:

false

Explanation:

All the members of one species in a particular area are referred to as a population. All the different populations that live together in an area make up a community. The community of organisms that live in a particular area, along with their nonliving surroundings, make up an ecosystem.

Answer:

all of the above

Explanation

Answer:

0.875

...............

Answer:

A. PbI2(s) ===> Pb2+(aq) + 2I-(aq)

B. Ksp = [Pb2+][I-]^2

C. 1.52 x 10^-3 M. It is equal to the moles/L of PbI2 that go into solution.

D. 2 x 1.52 x 10^-3 = 3.04 x 10^-3 M

E. Ksp = (1.52x10^-3)(2.31x10^-6) = 3.51 x 10^-9

Explanation:

In the given question, [tex]\rm PbI_2(s) \rightleftharpoons Pb^{2+}(aq) + 2I^-(aq)[/tex] is the dissolution reaction of [tex]\rm PbI_2[/tex] in water,   [tex]\rm Ksp = [Pb^{2+}][I^-]^2[/tex] is expression for Ksp for [tex]\rm PbI_2[/tex],  [tex]1.52\times 10^{-3 }[/tex] mol/L is the concentration of [tex]\rm Pb^{2+ }[/tex] in the equilibrium solution,  [tex]3.04\times 10^{-3}[/tex] mol/L is the concentration of I- in the equilibrium solution and

[tex]1.40\times 10^{-8}[/tex] is the solubility product of  [tex]\rm PbI_2[/tex], respectively.

A reaction is a process that involves the transformation of one or more substances into one or more different substances.

1. The dissolution reaction of [tex]\rm PbI_2[/tex] in water is:

[tex]\rm PbI_2(s) \rightleftharpoons Pb^{2+}(aq) + 2I^-(aq)[/tex]

2. The expression for Ksp for [tex]\rm PbI_2[/tex] is:

 [tex]\rm Ksp = [Pb^{2+}][I^-]^2[/tex]

Where, [tex]\rm [Pb^{2+}][/tex] is the concentration of [tex]\rm Pb^{2+ }[/tex] ions in solution and [tex]\rm [I^-][/tex] is the concentration of [tex]\rm I^-[/tex] ions in solution.

3. The solubility of  [tex]\rm PbI_2[/tex] is [tex]1.52\times 10^{-3 }[/tex] mol/L. Since [tex]\rm PbI_2[/tex] dissociates into one  [tex]\rm Pb^{2+ }[/tex] ion and two [tex]\rm I^-[/tex] ions, the concentration of  [tex]\rm Pb^{2+ }[/tex] in solution is equal to the solubility of  [tex]\rm PbI_2[/tex], which is [tex]1.52\times 10^{-3 }[/tex] mol/L.

[tex]\rm [Pb^{2+}] = 1.52\times 10^{-3}\ mol/L[/tex]

4. Since  [tex]\rm PbI_2[/tex] dissociates into one [tex]\rm Pb^{2+ }[/tex] ion and two  [tex]\rm I^-[/tex] ions, the concentration of  [tex]\rm I^-[/tex] ions in solution is twice the solubility of  [tex]\rm PbI_2[/tex] .

[tex]\rm [I^-] = 2 \times 1.52\times 10^{-3 }\ mol/L[/tex]

= [tex]3.04\times 10^{-3}[/tex] mol/L

5. The solubility product of  [tex]\rm PbI_2[/tex] can be calculated using the expression for Ksp and the concentrations of [tex]\rm Pb^{2+ }[/tex] and  [tex]\rm I^-[/tex] ions in solution.

[tex]\rm Ksp = [Pb^{2+}][I^-]^2[/tex]

=  [tex]1.52\times 10^{-3 }[/tex]  [tex]\times[/tex] [tex]\rm (3.04\times 10^{-3} mol/L)^2[/tex]

= [tex]1.40\times 10^{-8}[/tex]

Therefore, the dissolution reaction of [tex]\rm PbI_2[/tex] in water, expression for Ksp for [tex]\rm PbI_2[/tex], the concentration of Pb2+ in the equilibrium solution, the concentration of I- in the equilibrium solution and solubility product of  [tex]\rm PbI_2[/tex] is mentioned above.

Learn more about reaction here:

https://brainly.com/question/16737295

#SPJ4

Answer:

m = 176.04 g .

Explanation:

Hello there!

In this case, according to the mole-mass relationships, which are based off the mass of one mole of any compound via the molar mass, it is possible to realize that the molar mass of carbon dioxide is 44.01 (12.01+16*2) g/mol, and therefore, the mass in grams of 4.00 moles of this compound are calculated as shown below:

[tex]m=4.00molCO_2*\frac{44.01gCO_2}{1molCO_2}\\\\m=176.04g[/tex]

Best regards!

Answer:

What do you need help with

Explanation:

Explanation:

okay I'll help but whats the question