Answer:
it will decrease because there will not be food for all of them and there is very little space for them now so if there is more they will start to fight
Explanation:
there is very little habitat left for panda bears so if there population increases the food and space with be filed
Hello! jamilialves888
I'm glad you asked my name is ✰Tobie✰
And I will help you understand why the population of ⚝pandas ⚝
is decreasing .
-Your answer :βy Tobie
≛So why are pandas going extinct?
One of the main cause is due to the destruction of their own habitat
Since china is a country that is constantly growing their own homes are slowly being destroyed Since their habitats are becoming destroyed it forces them to live in small unhabitable area .
≛This leads to another problem.....
If they are forced to live in a small area there will be less food...
Since there is a shortage of food that will leave the panda's to slowly starve to death since pandas only eat bamboo they could never be able to live anywhere else....Another reason panda's are going extinct is because they are being hunted for their fur.
ex·tinct
/ikˈstiNG(k)t/
_____________
It means that the species does not exist anymore and
are no longer in existence
Hope this helps!
-Tobie <3
ʕ •ᴥ•ʔ
Things people think bad about them self
1. I'm to fat/skinny
2.I'm to ugly
3.I don't love myslef
4.why doesn't anyone like me
5. Im gonna hurt myslef
stay strong
1 2 3 4 5 and how the question ask
Identify the parts of a wave using the illustration and the function below.
Answer: 1. Crest 2. Trough 3. Wave Length 4. Amplitude
Explanation:
HELP ASAP 30 POINTS
IS THIS CORRECT?
answer: yes I believe so
explain: I just think it is I have done this before
HCl (aq) + NaOH (aq) = NaCl (aq) + H2O (l)
What type of reaction is the above?
Answer:
Neutralization reaction
Explanation:
It is a reaction between an acid and a base
Pls help if you can, Thx! Describe ozone creation and loss in the ozone layer. Does one occur more than the other?
Ozone was created millions of years ago from a natural process frozen in ice during the ice age, the gases that make up the ozone layer were formed naturally from oxygen atoms accompanied by a reaction of ultraviolet radiation and molecular oxygen which was frozen in the ice during the time of the ice age was released over years as the ice melted.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ6
PLSSSSSS ANSWERRRRR???
Answer:
( j ) should be the correct option because atomic number of fluorine is 9 so, no. of electrons and protons should be same I.e. 9
How many molecules are in 3.01 g of H2O
A. 0.167 molecules
B. 54.18 molecules
C. 1.01x10^23 molecules
D. 6.022x10^23
Answer:
Option C
Explanation:
No. of Molecules=(Given Weight/Molar weight)*Avagadro No.
Given weight of H2O=3.01g
Molar weight of H2O=18g
On applying the formula, we get:
No. of Molecules=(3.01/18)*6.023*10²³=1.01*10²³
Normal values for chemistry tests on serous fluid are different from values obtained on serum.
a. True
b. False
a. True. Due to the differences in composition between serous fluid and serum, the normal values for chemistry tests can vary.
Serum refers to the liquid component of blood that remains after the blood has clotted and the clot has been removed.
On the other hand, serous fluid is a clear, watery fluid that is similar to serum and is found in body cavities such as the pleural, peritoneal, and pericardial cavities.
The composition of serous fluid can differ from serum due to various factors. When testing serous fluid, the values for chemistry tests such as electrolytes, proteins, enzymes, and other analytes may have different reference ranges compared to those obtained from serum testing. This is because the cellular and protein content of serous fluid is different from that of blood serum.
For example, the normal range for protein concentration in serum is generally higher compared to serous fluid due to the presence of fibrinogen and other proteins involved in clotting that are not present in serous fluid.
Due to the differences in composition between serous fluid and serum, the normal values for chemistry tests can vary. Therefore, it is important to use appropriate reference ranges specific to serous fluid when interpreting the results of chemistry tests on serous fluid samples.
To know more about serum visit:
https://brainly.com/question/30559641
#SPJ11
What is the oxidation state of copper in Cu(C2H3O2)2? +2 -1 -2 +4 +1
2.0 L of a gas is at STP. What is the new pressure in kPa if the volume changes to 10.5 L and the temperature and # of molecules remain constant?
Answer:
What is the new volume if the temperature is constant? V=2.50L. P = lookPa. P2=40k Pa. V2 = x. PV = P2 ... If a sample of gas occupies 6.8 L at 327°C
1. A student wants to find how many calories are in a peanut. Describe in detailed complete sentences how they can test this using a can with
150g of water and a thermometer.
Answer: 65 cal
Explanation: they have to find the weight of the peanuts on a scale and per grams. Then put them in water . You should be able to get the calories
Which of the following would produce the most fluid lipid bilayer?
Choose one:
A. phospholipids with fully saturated tails of 20 carbon atoms
B. phospholipids with fully saturated tails of 18 carbon atoms
C. large amounts of cholesterol
D. phospholipids with tails of 18 carbon atoms and two double bonds
E. phospholipids with tails of 20 carbon atoms and two double bonds
Phospholipids with tails of 18 carbon atoms and two double bonds would produce the most fluid lipid bilayer
Option (D) is correct.
The fluidity of a lipid bilayer is influenced by the composition of the phospholipids that make up the membrane. The presence of unsaturated fatty acid tails, indicated by the presence of double bonds, increases the fluidity of the lipid bilayer.
phospholipids with tails of 18 carbon atoms and two double bonds, would produce the most fluid lipid bilayer among the given choices. The presence of double bonds in the fatty acid tails introduces kinks in the hydrocarbon chains, which prevent them from packing tightly together. This increases the fluidity of the lipid bilayer by allowing the phospholipids to move more easily.
Therefore, the correct option is (D).
To learn more about Phospholipids here
https://brainly.com/question/30414619
#SPJ4
T/F. In an aqueous and diethyl ether extraction the aqueous will be the top layer?
The statement is True. In an aqueous and diethyl ether extraction, the aqueous layer will be the top layer. This is due to the difference in density between water and diethyl ether.
Water has a higher density compared to diethyl ether, which causes it to settle at the bottom layer. Diethyl ether, being less dense, will form the top layer. During the extraction process, immiscible solvents like water and diethyl ether are used. Since these solvents do not mix together, they form separate layers based on their densities. Water, being denser, will settle at the bottom while diethyl ether, being lighter, will float on top. This allows for the separation of compounds or substances that are preferentially soluble in either of the solvents. By carefully extracting the top or bottom layer, depending on the desired component, one can isolate specific compounds from a mixture.
To learn more about Diethyl ether, click here: brainly.com/question/14662255 #SPJ11
Kathy is trying to conduct an experiment she wants an element that is
very reactive, which of these should she use?
Define Transportation plants:
Define Respiration Plants:
Answer:
Define Transportation in plants: Transportation in plants is when the plant transports water and other mineral throughout the whole plant from the roots to the stem and finally specific parts of a plant.
Define Respiration In Plants: Is when plants use photosynthesis to make their own food to make energy for the plant's growth
Which of the following statements is true?
Volcanoes can form mountains and islands.
Most changes to the crust happen slowly over time.
Plateaus are large, flat areas of land more than two thousand feet tall.
all of the above
the standard heat of formation for NO2 is 33.2. kj/mol. how much energy is required to form 140.0g of NO2 from its respective elements in kj
Approximately 100.916 kJ of energy is required to form 140.0 g of NO2 from its respective elements.
The energy required to form 140.0 g of NO2 from its respective elements can be calculated using the standard heat of formation and stoichiometry. First, we need to determine the number of moles of NO2 in 140.0 g. The molar mass of NO2 is 46.01 g/mol, so the number of moles is calculated as:
moles of NO2 = mass of NO2 / molar mass of NO2 = 140.0 g / 46.01 g/mol ≈ 3.043 mol
Next, we multiply the number of moles by the standard heat of formation, which is given as 33.2 kJ/mol:
energy required = moles of NO2 × standard heat of formation
= 3.043 mol × 33.2 kJ/mol
≈ 100.916 kJ
To learn more about molar mass, click here: brainly.com/question/12127540
#SPJ11
- The pit of an aqueous solution of NaOH is 12.9. What is the molarity of the solution?
Answer: The molarity of solution is 0.08 M
Explanation:
pH is the negative logarithm of hydrogen ion concentration. It tells abpout the acidity or basicity of a solution.
[tex]pH=-log[H^+][/tex]
also pH+pOH=14
given : pH of NaOH = 12.9
Thus pOH = (14-12.9) = 1.1
Thus [tex][OH^-]=10^{-1.1}=0.08M[/tex]
As [tex]NaOH\rightarrow Na^++OH^-[/tex]
As 1 mole of [tex]OH^-[/tex] is produced by = 1 mole of NaOH
Thus 0.08 moles of [tex]OH^-[/tex] are produced by = [tex]\frac{1}{1}\times 0.08=0.08[/tex] moles of NaOH
The molarity of solution is 0.08 M
What would be the mass, in grams, of 3.50 x 1025 molecules of chlorine?
Show your work
Answer:
2059.645g Cl
Explanation:
A mole of any element contains 6.022e23 molecules, so we will divide the given amount of molecules by 6.022e23.
3.5e25 / 6.022e23 = 5.81e1
5.81e1 = 58.1 mol Cl
Now that we have found the amount of moles of Chlorine, we will multiply the number of moles by the molar mass of Chlorine, which is 35.45g/mol.
35.45(58.1) = 2059.645g Cl
1. Assume that the top of your head has a surface area of 25cm x 25 cm. How many newtons of force push on your head at sea level? 2. If you estimate this area to be 100 in^2 what is the force in pounds
1. Approximately 6333.125 newtons of force push on your head at sea level. Given that the surface area of the top of your head is 25 cm x 25 cm = 625 cm², we can convert it to square meters:
To calculate the force pushing on your head at sea level, we need to use the formula for pressure:
Pressure = Force / Area
Area = 625 cm² × (1 m / 100 cm)^2 = 0.0625 m²
At sea level, the standard atmospheric pressure is approximately 101,325 Pascals (Pa) or 101.325 kilopascals (kPa). Therefore, the force pushing on your head can be calculated by multiplying the pressure by the area:
Force = Pressure × Area
Force = 101,325 Pa × 0.0625 m² = 6333.125 N (to three decimal places)
2.If the area of your head is estimated to be 100 square inches, approximately 1468.276 pounds of force push on your head at sea level.If we estimate the area to be 100 square inches, we can convert it to square meters:
Area = 100 in² × (0.0254 m / 1 in)^2 = 0.064516 m²
Using the same atmospheric pressure, the force pushing on your head can be calculated:
Force = Pressure × Area
Force = 101,325 Pa × 0.064516 m² = 6530.645 N (to three decimal places)
To convert this force into pounds, we can use the conversion factor of 1 N = 0.2248 lb:
Force in pounds = 6530.645 N × 0.2248 lb/N = 1468.276 lb (to three decimal places)
For more such questions on surface area.
https://brainly.com/question/16557677
#SPJ8
how do hydrogen fuel cells and fossil fuels produce energy?
Answer:
The hydrogen reacts with oxygen across an electrochemical cell
Explanation:
13. The element with the following electron configuration [Kr] 4d105s25p2 belongs to
Group of answer choices
actinide.
metal.
transition element.
nonmetal.
lanthanide.
14. Which is a physical change?
Group of answer choices
KNO3 dissolves in water
A firecracker explodes
Popcorn pops when placed in a microwave
A nail rusts
A piece of wood is burned
The element with the following electron configuration [Kr] 4d105s25p2 belongs to transition element.
The given electron configuration belongs to an element with atomic number 52. It can be written as 1s22s22p63s23p63d104s24p64d105s25p2. It belongs to the transition element as the electrons are filled in d orbital. KNO3 dissolves in water is a physical change.A physical change refers to a change in the state or properties of matter without any modification in its composition. The given options that are physical change and rest is a chemical change.KNO3 dissolves in water is a physical change as the salt is still KNO3 and has not been modified into something else. It simply separated into smaller particles to mix uniformly with the solvent, which in this case is water.A firecracker explodes, when popcorn pops when placed in a microwave and a piece of wood is burned are all examples of chemical change.A nail rusts is also a chemical change.
Learn more about electron configuration here:
https://brainly.com/question/29157546
#SPJ11
Predict the electron pair geometry and the molecular structure of each of the following molecules or ions: (a) ClNO (N is the central atom); Determine: electron-pair geometry ; molecular structure ; (b) CS2; Determine: electron-pair geometry ; molecular structure ; (c) Cl2CO (C is the central atom); Determine: electron-pair geometry ; molecular structure ; (d) Cl2SO (S is the central atom); Determine: electron-pair geometry ; molecular structure ; (e) SO2F2 (S is the central atom); Determine: electron-pair geometry ; molecular structure ; (f) XeO2F2 (Xe is the central atom); Determine: electron-pair geometry ; molecular structure ; (g) ClOF2 (Cl is the central atom); Determine: electron-pair geometry ; molecular structure ;
Answer:
See explanation
Explanation:
In ClNO , nitrogen is the central atom here. The central atom has a tetrahedral electron pair geometry and a lone pair on the nitrogen atom. Due to the lone pair, the electron pair geometry is now trigonal pyramidal.
The molecule CS2 has a linear molecular geometry. There are four electron groups around the central atom hence the electron pair geometry is tetrahedral but the molecular geometry results from the repulsion of the two double bonds.
The electron domain geometry for Cl2CO is tetrahedral since there are four electron pairs around the central atom. However, the molecular geometry is trigonal planar due to the sp2 hybridization of the central carbon atom.
The electron domain geometry of Cl2SO is tetrahedral due to the four electron pairs around the central atom. However, due to the lone pair on sulphur, the molecular geometry is triagonal pyramidal.
In SO2F2, sulphur the central atom is surrounded by four electron pairs which are all bonding groups hence both the molecular geometry and the electron pair geometry is tetrahedral.
In XeO2F2, the central atom is Xe. There are five electron pairs around the Xe central atom four of which are bonding groups. The electron domain geometry and molecular geometry is trigonal bipyramidal.
For ClOF2 , the central atom Cl is surrounded by four electron pairs hence the electron pair geometry is tetrahedral but it is an AX3E(three bonding groups and one lone pair are present in the structure) specie hence it is trigonal pyramidal.
How is it possible for scientists to know the composition of stars without traveling to the star?
Answer:
One of the most common methods used today to determine the composition of stars is spectroscopy.
Explanation:
Spectroscopy is the study of the interaction between matter and electromagnetic radiation as a function of the wavelength or frequency of the radiation.
Emu
Sparrow
How are emus and sparrows alike?
A. Both birds build nests in trees.
B. Both birds are taller than humans.
C. Both birds catch small animals while flying.
U
D. Both birds have a beak for breaking apart food.
How do you make the shadows of objects appear bigger on the screen
Explanation:
Indoors, you can change the size of a shadow by moving your body or the object closer to or farther from the light.
Shadows grow bigger and fuzzier as the object moves closer to the light source, and smaller and sharper as the object moves farther away.
A 25.0 mL sample of 0.150M hydrocyanic acid is titrated with a 0.150M NaOH solution. What is the pH before any base is added? The Ka of hydrocyanic acid is 4.9 X 10^-10.
The pH before any base is added to the hydrocyanic acid solution is approximately 0.82.
Before any base is added, the pH of the hydrocyanic acid solution can be calculated using the Ka value and the initial concentration of the acid. The pH of a solution is determined by the concentration of H+ ions present. Hydrocyanic acid (HCN) is a weak acid that partially dissociates in water. The dissociation can be represented as follows: HCN ⇌ H+ + CN-. The Ka value of hydrocyanic acid (HCN) is given as 4.9 x 10^-10.
To find the pH before any base is added, we can assume that the dissociation of HCN is negligible compared to its initial concentration. Therefore, the concentration of H+ ions can be considered equal to the initial concentration of HCN. Using the given concentration of hydrocyanic acid (0.150M), we can calculate the pH by taking the negative logarithm (pH = -log[H+]). The concentration of H+ ions is 0.150M, and thus the pH is determined as the negative logarithm of 0.150, which is approximately 0.82.
To learn more about concentration, click here:
brainly.com/question/3045247
#SPJ11
how to find rate of reaction experimentally of the reaction ? plz help
Based on the reduction potential data, What is the standard cell potential for the following electrochemical cell reaction:
Zn(s) + Cu^2+(aq) Zn^2+(aq) + Cu(s)?
E red = -0.763 V for Zn^2+ (aq) + 2e^- Zn(s)
E red = +0.340 V for Cu^2+(aq) + 2e^- Cu(s)
a. -0.423 V
b. +1.10 V
c. +0.423 V
The standard cell potential (E° cell) for the given electrochemical cell reaction is +1.103 V. (B)
Based on the reduction potential data, the standard cell potential for the electrochemical cell reaction: Zn(s) + Cu⁺(aq) + Zn²⁺aq) + Cu(s) can be calculated as follows:
Reaction: Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s)
The standard cell potential (E° cell) is calculated as follows:E° cell = E° red(cathode) - E° red(anode)
We have, E° red(Zn²⁺) = -0.763 VE° red(Cu²⁺) = +0.340 V
Therefore,E° cell = E° red(Cu²⁺) - E° red(Zn²⁺) = 0.340 V - (-0.763 V) = +1.103 V
The standard cell potential for the electrochemical cell reaction: Zn(s) + Cu⁺(aq) + Zn²⁺aq) + Cu(s) can be calculated using the reduction potentials for the cathode and anode.
The cathode has a reduction potential of +0.340 V for Cu²⁺(aq) + 2e⁻ Cu(s) and the anode has a reduction potential of -0.763 V for Zn²⁺ (aq) + 2e⁻Zn(s).
Using the formula,E° cell = E° red(cathode) - E° red(anode)we get,E° cell = E° red(Cu²⁺) - E° red(Zn²⁺) = 0.340 V - (-0.763 V) = +1.103 V.(B)
To know more about standard cell potential click on below link:
https://brainly.com/question/29797132#
#SPJ11
. What is the total voltage of the circuit, if you install two D-cell batteries in a flashlight so that their positive ends are facing each other compared to If you installed the batteries with the positive and negative terminal facing each other
Answer:
0
Explanation:
A voltage makes the electric charges to move.
When we install a D - cell batteries in the flashlight with their positive ends facing each other, as compared to the batteries installed with their positive and negative terminals facing each other, the flashlight will not work as the total voltage across the two batteries will be zero.