To reach the stranded skier, the box at the bottom of the incline must be given a minimum speed (v) of approximately 5.65 m/s. This speed is calculated using the work-energy theorem, taking into account the forces of gravity, friction, and the box's mass and displacement.
Determine the minimum speed of the box?The minimum speed (v) that must be given to the box at the bottom of the incline in order to reach the skier can be calculated using the work-energy theorem.
The work-energy theorem states that the work done on an object is equal to the change in its kinetic energy. In this case, the work done on the box will be equal to the work done by the force of gravity and the work done by the friction force.
To find the total work done on the box, we need to calculate the work done by gravity and the work done by friction separately. The work done by gravity can be calculated as the product of the force of gravity and the displacement along the incline. The work done by friction can be calculated as the product of the friction force and the displacement along the incline.
Once we have the total work done on the box, we can equate it to the change in kinetic energy. Since the box starts from rest, the initial kinetic energy is zero. The final kinetic energy will be 1/2 mv², where m is the mass of the box.
Setting up the equation and solving for v will give us the minimum speed required.
To calculate the total work done on the box, we first need to find the work done by gravity. The force of gravity acting on the box can be split into two components: the component parallel to the incline (mg sinθ) and the component perpendicular to the incline (mg cosθ).
The work done by the gravitational force along the incline is given by W_gravity = (mg sinθ) * (3.50 m).
Next, we calculate the work done by the friction force. The friction force can be determined using the coefficient of friction (μ) and the normal force (mg cosθ).
The friction force (f_friction) is equal to μ times the normal force.
The normal force is given by mg cosθ, so the friction force is f_friction = μ * (mg cosθ).
The work done by friction is given by W_friction = f_friction * (3.50 m).
Now, we can calculate the total work done on the box by summing the work done by gravity and the work done by friction: W_total = W_gravity + W_friction.
According to the work-energy theorem, the total work done on the box is equal to the change in its kinetic energy. Since the box starts from rest, the initial kinetic energy is zero.
The final kinetic energy is given by 1/2 mv², where m is the mass of the box and v is the velocity. Therefore, we have W_total = (1/2)mv².
By equating these two expressions, we can solve for v:
(1/2)mv² = W_gravity + W_friction
Substituting the expressions for W_gravity and W_friction, and rearranging the equation, we get:
(1/2)mv² = (mg sinθ) * (3.50 m) + (μ * mg cosθ) * (3.50 m)
Now we can substitute the given values into the equation. The mass of the box is 2.50 kg, the angle of the incline is 30.0°, the coefficient of friction is 6.00x10², and g is the acceleration due to gravity, which is 9.81 m/s².
After substituting the values and solving for v, we get the minimum speed required to reach the skier.
To know more about acceleration, refer here:
https://brainly.com/question/980919#
#SPJ4
Complete question here:
Use the work-energy theorem to calculate the minimum speed v that you must give the box at the bottom of the incline so that it will reach the skier. You are a member of an alpine rescue team and must get a box of supplies, with mass 2.50 kg, up an incline of constant slope angle 30.0° so that it reaches a stranded skier who is a vertical distance 3.50 m above the bottom of the incline. There is some friction present; the kinetic coefficient of friction is 6.00x102. Since you can't walk up the incline, you give the box a push that gives it an initial velocity; then the box slides up the incline, slowing down under the forces of friction and gravity. Take acceleration due to gravity to be 9.81 m/s Express your answer numerically, in meters per second.
1. How to approach the problem
2. Find the total work done on the box
The left end of a spring is attached to a wall. When Bob pulls on the right end with a 200 N force, he stretches the spring by 20 cm. The same spring is then used for a tug-of-war between Bob and Carlos. Each pulls on his end of the spring with a 200 N force. How far does the spring stretch
Answer:
40 cm
Explanation:
Since Bob pulls with a force of F = 200 N when the spring is attached to the wall and it extends a length x = 20 cm, from Hooke's law,
F = kx where k = spring constant
So, k = F/x = 200 N/20 cm = 10 N/cm
Now, sine both Bob and Carlos pull with a force of F = 200 N in opposite directions, the spring stretches about its center and has an extension, x' in each direction.
So, from F = kx
x = F/k = 200 N/10 N/cm = 20 cm
So, the spring stretches 20 cm in both directions.
So, the total extension is thus x' + x' = 2x' = 2(20 cm) = 40 cm
The spring will stretch 40 cm.When a force is act om the spring the spring will stretch or compress depeds on the application of force.
What is hooke's law?Hooke's law states that the force used to extend the spring is directly equal to the amount of stretch.
The force needed to extend the spring is proportional to its displacement. It is stated as
F=Kx
The given data in the problem is;
F is the force of pull to bob= 200 N
x is the length of extension= 20 cm.
F' is the force act on the another end= 200 N
According to Hooke's law,
[tex]\rm F = Kx \\\\ \rm K= \frac{F}{x} \\\\ \rm K= \frac{200}{20} \\\\ \rm K=10 \ N/cm[/tex]
The extension due to another end force is found by;
[tex]\rm x' = \frac{F}{K} \\\\ \rm x' = \frac{200}{10} \\\\ \rm x' = 20[/tex]
The total extension of the spring will be;
[tex]\rm x_t = x+x' \\\\ \rm x_t = 2(20) \\\\ \rm x_t =40\ cm[/tex]
Hence the spring will stretch 40 cm.
To learn more about the hooke's law refer to the link;
https://brainly.com/question/13348278
At high elevations or high latitudes, some of the water that falls on land does not immediately soak in , run off, evaporate or transpire. where is the water being temporarily stored?
Answer:
The water is stored in ice sheets and as snow
Explanation:
Temperature reduces with an increase in altitudes. The standard laps rate is 6.5°C per 1,000 m gained in elevation
At very high elevations, therefore, the air is usually very cold such that when an elevation of 4,500 meters is reached at the equator, it is possible to observe snowfall and the water remain temporarily stored on the surface of the mountain as ice and snow
Investigators are exploring ways to treat milk for longer shelf life by using pulsed electric fields to destroy bacterial contamination. One system uses 8. 0-cm-diameter circular plates separated by 0. 95 cm. The space between the plates is filled with milk, which has the same dielectric constant as that of water. The plates are briefly charged to 30,000 V. What is the capacitance of the system? How much charge is on each plate when they are fully charged?
The given system consists of two 8.0-cm-diameter circular plates separated by 0.95 cm, which are filled with milk. The capacitance of the system can be calculated as follows:Explanation:Capacitance is defined as the charge stored per unit potential difference,using the formula C = Q/V, where C is capacitance, Q is charge, and V is potential difference.
In this case, the capacitance of the system can be calculated using the formula for the capacitance of parallel plate capacitors:
[tex]C = εA/d[/tex],
where C is capacitance, ε is the permittivity of free space, A is the area of each plate, and d is the distance between the plates.The area of each plate can be calculated using the formula for the area of a circle:
[tex]A = πr²[/tex],
where r is the radius of the circle.Substituting the given values into the formula, we get:
[tex]C = εA/dC = (8.85 × 10⁻¹² F/m) × [(π × (8.0/2 × 10⁻² m)²)/0.95 × 10⁻² m]C = 6.21 × 10⁻¹⁰ F[/tex]
Thus, the capacitance of the system is [tex]6.21 × 10⁻¹⁰ F[/tex].
The amount of charge on each plate when they are fully charged can be calculated using the formula Q = CV, where Q is charge, C is capacitance, and V is potential difference.Substituting the given values into the formula, we get:
[tex]Q = CVQ = (6.21 × 10⁻¹⁰ F) × (30,000 V)Q = 1.86 × 10⁻⁵ C[/tex]
Thus, the amount of charge on each plate when they are fully charged is [tex]1.86 × 10⁻⁵ C[/tex].
To know more about capacitance visit :
https://brainly.com/question/31871398
#SPJ11
2.
Which of the following has the greatest momentum?
A.
0.2 kg ball moving at 40 m/s
В.
500 kg car traveling at 16 m/s
С.
2000 kg truck traveling at 9 m/s
D
50 kg child skateboarding at 4 m/s
Answer:
I'm corona positive and isolated feeling depressed just logged in to talk someone but people ignoring me thanks for this behaviour got disappointed bye everyone logging out had a great time
Which of these energy transformations is not part of how a nuclear power plant
provides electrical energy to a home?
changing electrical energy to chemical energy
changing thermal energy to mechanical energy
changing nuclear energy to thermal energy
changing mechanical energy to electrical energy
a maciromwave an an eray are traveling in a vacuum compared to the wavelnegth and period of the microwave the x ray hasa wavelnegth that is
A maciromwave and an X-ray are traveling in a vacuum compared to the wavelnegth and period of the microwave, the X-ray has a wavelnegth that is shorter than that of a microwave
A microwave and an X-ray are both electromagnetic waves that travel through a vacuum, they differ in their wavelength and frequency. The wavelength of an X-ray is shorter than that of a microwave. The wavelength and period of a wave are inversely proportional. This means that as the wavelength decreases, the frequency and period increase. This is the case for X-rays, which have a high frequency and short period compared to microwaves.
In terms of energy, X-rays have more energy than microwaves due to their shorter wavelength. This allows X-rays to penetrate materials more easily and be used in medical imaging. In conclusion, the wavelength and period of a wave are inversely related. X-rays have a shorter wavelength and higher frequency compared to microwaves, allowing them to have more energy and penetrate materials more easily. So therefore the wavelength of an X-ray is shorter than that of a microwave.
To know more about X-rays visit:
https://brainly.com/question/29774932
#SPJ11
A cyclist travels 21 km in 90 minutes. Calculate, in m s–1 , the speed of the cyclist.
Answer:
35/9 m/s
Explanation:
21 km = 21000 m
90 min = 90*60 s = 5400 s
21000/5400 = 35/9 m/s
the movement of the action potential down the length of the axon is
The movement of the action potential down the length of the axon is a crucial process in neural communication.
The action potential is an electrical signal that allows neurons to transmit information throughout the nervous system. When a neuron receives a stimulus, it undergoes a rapid change in membrane potential, resulting in the generation of an action potential.
This electrical impulse travels down the length of the axon, which is the long, slender projection of the neuron. The movement of the action potential is facilitated by a series of events. Initially, the depolarization of the neuron's membrane triggers the opening of voltage-gated sodium channels, leading to an influx of sodium ions.
This influx of positive charge further depolarizes the membrane, propagating the action potential along the axon. As the action potential travels, the depolarization in one region of the axon triggers the opening of voltage-gated sodium channels in the adjacent region, allowing the action potential to continue its journey.
This process of depolarization and propagation repeats along the length of the axon until the action potential reaches the axon terminal. At the axon terminal, the action potential triggers the release of neurotransmitters, which transmit the signal to the next neuron or target cell.
To learn more about action potential here:
https://brainly.com/question/4305583
#SPJ11
Two identical metal objects are insulated from their surroundings. Object A has a net charge of excess electrons. Object B is grounded. Which object is at a higher potential?
a) A
b) B
c) Both are at the same potential.
d) Cannot be determined without more information.
As a result, electrons are in high potential energy, and the object A has a negative potential.
Two identical metal objects are insulated from their surroundings. Object A has a net charge of excess electrons. Object B is grounded. The object at a higher potential is the object with excess electrons which is object A. The correct option is: A .In grounded object, the excess charges will neutralize and are canceled out by opposite charges from the earth, resulting in the object having no charge or neutral. Therefore, object B is neutral. On the other hand, Object A has an excess of electrons that create an electrostatic repulsive force, with each electron repelling each other.
Know more about potential here:
https://brainly.com/question/9349250
#SPJ11
q11: why was your surface pressure higher or lower than the slp of your location? if your location is falcon field, then remember that the surface pressure was measured at 245 meters above sea level.
The surface pressure may be higher or lower than the sea level pressure (SLP) of Falcon Field depending on various factors such as local weather conditions, elevation differences, and atmospheric disturbances.
Surface pressure refers to the atmospheric pressure measured at a specific location on the Earth's surface. It can be influenced by multiple factors, leading to variations compared to the sea level pressure (SLP) recorded at a specific elevation, in this case, 245 meters above sea level at Falcon Field.
One possible reason for the surface pressure to be higher than the SLP is the presence of a high-pressure system. High-pressure systems are associated with sinking air and can cause surface pressure to increase. Additionally, local weather conditions, such as temperature and humidity, can affect the density of the air, influencing surface pressure. For example, warmer air is less dense and can result in lower surface pressure.
Conversely, colder air is denser and can lead to higher surface pressure. Furthermore, topographical features like hills or mountains near the location can create localized pressure differences due to variations in elevation. Lastly, atmospheric disturbances, such as the passage of weather fronts or the presence of storms, can cause temporary changes in surface pressure compared to the SLP. Therefore, multiple factors need to be considered when analyzing the differences between surface pressure and the SLP at a specific location like Falcon Field.
Learn more about surface pressure here:
https://brainly.com/question/31792877
#SPJ11
Which person below is likely to have better health?
A. Jenna, who is optimistic about life
B. Albert, who thinks that events in his life are not in his control
C. Peter, who is depressed
D. Claire, who blames everyone else for her circumstances
SUBMIT
Jenna, who is optimistic about life, is likely to have better health. Hence, option (A) is correct.
What is mental health?Mental health affects cognition, perception, and behavior and includes emotional, psychological, and social well-being. It also affects how someone responds to stress, interacts with others, and makes decisions.
Subjective well-being, perceived self-efficacy, autonomy, competence, generational reliance, and self-actualization of one's intellectual and emotional potential are only a few examples of what is considered to be mental health.
The ability to enjoy life and strike a balance between daily activities and endeavors to develop psychological resilience may be considered a sign of mental health from the viewpoints of positive psychology or holistic approaches.
Learn more about mental health here:
https://brainly.com/question/18216607
#SPJ2
an engine uses 5280 j of input heat to do 702 j of work. how much heat is rejected into the air
An engine uses 5280 j of input heat to do 702 j of work. The heat rejected into the air is 4578 J.
In this case, we can use the first law of thermodynamics, which states that the heat input to a system is equal to the work done by the system plus the heat rejected or lost.
Given:
Input heat (Qin) = 5280 J
Work done (W) = 702 J
The equation for the first law of thermodynamics is:
Qin = W + Qout,
where Qin is the input heat, W is the work done, and Qout is the heat rejected.
Rearranging the equation to solve for Qout:
Qout = Qin - W.
Substituting the given values:
Qout = 5280 J - 702 J.
Calculating the result:
Qout = 4578 J.
Therefore, the heat rejected into the air is 4578 J.
To know more about heat, refer here:
https://brainly.com/question/2427061#
#SPJ11
A container of carbon dioxide has a volume of 315 cm³ at a temperature of 25°C if the pressure remains constant what is the volume of 54°C
Answer:
680.4
Explanation:
the formula is V1 over T1 is equals (=) to V2 over T2 .
and we have been given that
V1 represents 315
T1 represents 25°c
V2 is unknown and what we're finding
T2 represents 54°c
so 315×54 all over 25 ...gives you 680.4
By using the definition of path-connectedness, show that [0,3) is path-connected.
By using the definition of path-connectedness, [0,3) is path-connected can be shown as f(t) is a linear function, and the interval [0,1] is mapped to [0,3) in a continuous and smooth manner.
To show that the interval [0,3) is path-connected, we need to demonstrate that for any two points in the interval, there exists a continuous path connecting them entirely within the interval.
Let's take two arbitrary points in [0,3), say a and b, where 0 ≤ a < b < 3.
Consider the following continuous function f: [0,1] → [0,3) defined as:
f(t) = (1-t)a + tb
where t is a parameter ranging from 0 to 1.
We can verify that f(0) = (1-0)a + 0b = a, which is the starting point, and f(1) = (1-1)a + 1b = b, which is the ending point.
Now, let's show that f(t) lies entirely within [0,3) for any value of t. Since a < b, we know that the function f(t) = (1-t)a + tb lies between a and b for all t ∈ [0,1]. Since a and b are in the interval [0,3), f(t) is also bounded within [0,3).
Moreover, f(t) is a linear function, and the interval [0,1] is mapped to [0,3) in a continuous and smooth manner.
Therefore, we have constructed a continuous path (via the function f) connecting any two points a and b within [0,3), satisfying the definition of path-connectedness.
Hence, we can conclude that the interval [0,3) is path-connected.
To learn more about path, click here:
https://brainly.com/question/30897010
#SPJ11
Atmospheric pressure on the peak of Mt. Everest can be as low as 0.197 atm, which is why
climbers need to bring oxygen tanks for the last part of the climb. If the climbers carry 10.0
liter tanks with an internal gas pressure of 40 atm, what will be the volume in liters of the gas
when it is released from the tanks?
Answer:2,030
Explanation:
40 atm x 10.0 L = 400
400/0.197 atm = 2,030
A 1.99 uF capacitor that is initially uncharged is connected in series with a 5.77 ki2 resistor and an emf source with 54.3 V and negligible internal resistance. The circuit is completed at t = 0. just after the circuit is completed, what is the rate at which electrical energy is being dissipated in the resistor?
The rate at which electrical energy is being dissipated in the resistor is 0.052 Watts.
What is resistor?
A resistor is an electronic component that is used to resist the flow of electric current in a circuit. It is specifically designed to have a specific resistance value, which determines how much it restricts the flow of current. Resistors are typically made of materials with high resistivity, such as carbon, metal alloys, or wire-wound materials.
Given:
Capacitance (C) = 1.99 μF = 1.99 * 10⁻⁶ F
Resistor (R) = 5.77 kΩ = 5.77 * 10³ Ω
EMF source voltage (V) = 54.3 V
First, we need to find the current flowing through the circuit. The current at any time t in an RC circuit can be given by:
I(t) = (V / R) * (1 - e⁻ᵗ⁄ ʳ×ᶜ)
At t = 0, just after the circuit is completed, we can simplify this to:
I(0) = (V / R)
Substituting the given values:
I(0) = (54.3 V) / (5.77 * 10³ Ω)
Calculating this, we find:
I(0) ≈ 0.00941 A
Now, to determine the rate at which electrical energy is being dissipated in the resistor, we use the formula for power:
P = I² * R
Substituting the value of current:
P = (0.00941 A)² * (5.77 * 10³ Ω)
Calculating this, we find:
P ≈ 0.052 W
Therefore, just after the circuit is completed at t = 0, the rate at which electrical energy is being dissipated in the resistor is approximately 0.052 Watts.
To learn more about resistor,
https://brainly.com/question/17671311
#SPJ4
The density of water is 1. 0 g/cm3. How many kilograms of water does a submerged 120-cm3 block displace? Recall that 1. 0 g/cm3 weights 9. 8 N on earth. What is the buoyant force on the block?
The density of water is 1.0 g/cm³. It's required to determine the mass of water displaced by a submerged 120-cm³ block and the buoyant force on the block.To find the mass of water displaced by a 120 cm³ block, we first need to know the mass of 1 cm³ of water, which is equal to its density, which is 1.0 g/cm³.
The volume of the block is 120 cm³, so we can calculate its mass by multiplying its volume by the density of water. Therefore, the mass of the block submerged in water is:120 cm³ × 1.0 g/cm³ = 120 gTo find the number of kilograms, we divide the value obtained by 1000. Therefore, 120 g = 0.12 kg.The buoyant force is equal to the weight of the water displaced by the block. The buoyant force equals the weight of water displaced by the object.
The weight of 1 cm³ of water is 9.8 N (newtons), which is equal to the weight of 1 g of water. We can use this to calculate the weight of water displaced by the block as follows:120 cm³ × 1.0 g/cm³ × 9.8 N/g = 1176 NTherefore, the buoyant force acting on the block is 1176 N (Newtons).
To know more about weight visit :
https://brainly.com/question/31659519
#SPJ11
Help please!!!!!!!!!!
Answer:
j
Explanation:
An f/3.05 CCD camera has a 109 mm focal length lens and can focus on objects from infinity to as near as 32.5 cm from the lens. Note: "773.05* means an number of 3.05. HINT (a) Determine the camera's aperture diameter in mm. mm Determine the minimum and maximum distances in cm from the CCD sensor over which the lens must be able to travel during focusing (b) minimum cm (c) maximum cm
a)The camera's aperture diameter is approximately 35.737 mm, b)The minimum distance from the CCD sensor during focusing is approximately infinity, c) The maximum distance from the CCD sensor during focusing is approximately infinity.
To determine the camera's aperture diameter in mm, we can use the formula for calculating the aperture diameter based on the f-number (f/3.05):
Aperture diameter = Focal length / f-number
Substituting the values into the formula, we get:
Aperture diameter = 109 mm / 3.05
Aperture diameter = 35.737 mm (rounded to three decimal places)
Now, let's calculate the minimum and maximum distances from the CCD sensor over which the lens must be able to travel during focusing.
Given:
Minimum focusing distance = 32.5 cm
Infinity focusing distance (approximated as very large) = infinity
(b) Minimum distance from the CCD sensor during focusing:
The minimum distance from the CCD sensor during focusing is the difference between the infinity focusing distance and the minimum focusing distance. Since infinity is approximated as very large, we can consider the minimum distance as:
Minimum distance = Infinity - Minimum focusing distance
Minimum distance = infinity
(c) Maximum distance from the CCD sensor during focusing:
The maximum distance from the CCD sensor during focusing is the difference between the infinity focusing distance and the minimum focusing distance. Since infinity is approximated as very large, we can consider the maximum distance as:
Maximum distance = Infinity - Minimum focusing distance
Maximum distance = infinity
To know more about aperture diameter
https://brainly.com/question/10095671
#SPJ4
Which type of bond is the attraction between two oppositely charged atoms or groups of atoms
Answer:
The type of bond is ionic bond also called electrovalent bond.
Explanation:
This ionic bond is formed through an electrostatic attraction between two oppositely charged atoms.
Hope this helps! :)
And also this question was already answered on Brainly if you wanna check it out.
I need the definition or I won't graduate help and thank you
Answer:
1. a 2.c 3 b
Explanation:
Answer:
3=b 2=c 1=a
Explanation:
an astronaut travels to a distant star on a spaceship moving at velocity 0.997c, where c is the speed of light, and then returns to earth. the astronaut has a twin who remains on the earth. according to the twin on the earth 11 years pass before the astronaut returns. how many years have passed according to the astronaut?
According to the twin on Earth, 11 years have passed whereas, according to the astronaut, approximately 142.10 years have passed during their journey to the distant star and back.
According to the astronaut traveling at a velocity of 0.997c, the number of years that have passed can be calculated using the concept of time dilation in special relativity.
Time dilation occurs when an object moves at speeds close to the speed of light relative to another object.
The formula for time dilation is given by:
t' = t / √(1 - v²/c²)
Where:
t' is the time experienced by the moving object (the astronaut)
t is the time experienced by the stationary object (the twin on Earth)
v is the velocity of the moving object relative to the stationary object
c is the speed of light
In this case, the astronaut is traveling at a velocity of 0.997c. Let's calculate the time experienced by the astronaut.
t' = 11 / √(1 - (0.997c)²/c²)
Calculating the square of 0.997c:
(0.997c)² = (0.997)² * c²
0.997)² * c² = 0.994009 * c²
Substituting the value back into the time dilation formula:
t' = 11 / √(1 - 0.994009 * c²/c²)
Simplifying the equation:
t' = 11 / √(1 - 0.994009)
t' = 11 / √(0.005991)
t' = 11 / 0.077453
t' ≈ 142.10 years
Therefore, according to the astronaut, approximately 142.10 years have passed during their journey to the distant star and back.
According to the twin on Earth, 11 years have passed. However, due to the effects of time dilation at the high velocity of the spaceship, the astronaut experiences a significantly longer duration of time. In this case, approximately 142.10 years have passed according to the astronaut.
To know more about astronaut visit:
https://brainly.com/question/29727760
#SPJ11
State all facts and questions within the diagram.
On minerals and effects of mining:
The mineral in the diagram is water. Water is a mineral because it is a naturally occurring, inorganic substance that has a definite chemical composition.Mining can pollute water, air, and soil. It can also disrupt wildlife habitats and contribute to climate change.What are other effects of mining?Facts:
Water is a mineral.A mountain is a landform that is typically higher than a hill.A plant is a living organism that can make its own food.After mining, the land may be left scarred and the environment may be damaged. It can take many years for the environment to recover from mining.Water pollution: Mining can contaminate water with heavy metals, chemicals, and sediments. This can make water unsafe to drink, swim in, or use for irrigation.
Air pollution: Mining can release dust, fumes, and gases into the air. This can contribute to respiratory problems and other health problems.
Soil pollution: Mining can contaminate soil with heavy metals, chemicals, and sediments. This can make soil unsafe for growing crops or for other uses.
Wildlife habitat disruption: Mining can destroy wildlife habitats. This can lead to the loss of species and the disruption of ecosystems.
Climate change: Mining can contribute to climate change by releasing greenhouse gases into the atmosphere.
Find out more on mining here: https://brainly.com/question/1278689
#SPJ1
if the incident intensity of the light is 78 w/m, what is the intensity of the light that emerges from the filter? (express your answer to two significant figures.)
The intensity of the light that emerges from the filter is 38 w/m.
According to Malus's Law, the intensity of light that passes through a polarizer is proportional to the cosine squared of the angle between the transmission axis of the polarizer and the direction of polarization of the light. The equation is given as I = I_0 cos²θ where I is the transmitted light intensity, I_0 is the incident light intensity, and θ is the angle between the polarization direction and the transmission axis of the polarizer.In this case, the incident intensity of light is 78 W/m. Since the filter is placed perpendicular to the direction of polarization of the incident light, the angle between the polarization direction and the transmission axis of the polarizer is 90°. Thus, θ = 90°, cos θ = 0, and the transmitted light intensity is zero. Therefore, the intensity of the light that emerges from the filter is 0.
Force is the degree, volume, or greatness of a thing, like fire, feeling, climate, work, or energy. The word "intensity" is frequently associated with rage, passion, and violence. It is used to talk about the intensity of things like a love affair or perhaps a flame.
Know more about intensity, here:
https://brainly.com/question/17583145
#SPJ11
fill in the blank. quasars vary on a timescale of ___________. this means they must be very _________.
Fill in the blank: Quasars vary on a timescale of days to months. This means they must be very dynamic.
Quasars, also known as quasi-stellar objects, are extremely luminous and distant celestial objects that emit massive amounts of energy. They are powered by supermassive black holes at the centers of galaxies. The variability of quasars refers to their fluctuations in brightness over time. Observations have shown that quasars can exhibit significant changes in their luminosity on timescales ranging from days to months. The rapid variability of quasars suggests that the processes occurring in their vicinity must be highly dynamic. The variability is believed to arise from the accretion of matter onto the central black hole, which generates intense radiation and powerful jets of material. Studying the timescale of quasar variability provides insights into the physical mechanisms occurring near supermassive black holes and helps astronomers understand the nature and evolution of these fascinating cosmic objects.
To learn more about timescale, Click here:
https://brainly.com/question/32234089
#SPJ11
Explain what does a calorimeter measure?
Measuring the heat of chemical reactions or physical changes.
Pls help with all questions dew in 10 minutes!
A 95 kg person climbs some stairs at a constant rate, gaining 2.8 meters in height. Find the work done by the person, in joules, to accomplish this task.
The work done by the person to climb some stairs at a constant rate and gain 2.8 meters in height is approximately 2605.86 J.
The work done by the person can be calculated using the formula W = Fd where W is the work done, F is the force applied and d is the distance moved in the direction of the force.
In this case, the force applied is equal to the weight of the person which can be calculated using the formula F = mg where m is the mass of the person and g is the acceleration due to gravity which is approximately 9.81 m/s².
Given that the mass of the person is 95 kg, we can calculate the force applied as follows:
F = mg = (95 kg)(9.81 m/s²) = 931.95 N
The distance moved in the direction of the force is equal to the height gained which is 2.8 meters.
Now we can substitute these values into the formula for work done:
W = Fd
W = (931.95 N)×(2.8 m)
W ≈ 2605.86 J
Therefore, the work done by the person to climb some stairs at a constant rate and gain 2.8 meters in height is approximately 2605.86 J.
To know more about force
https://brainly.com/question/12970081
#SPJ4
The graph below represents the motion of four cars, labeled W, X, Y, and Z.
w
Distance
Time
Which car traveled at a constant speed throughout its motion?
O AW
ОВ. Х
О O c.ru
OD. Z
Answer:
Answer is A
Explanation:
As we know , for constant velocity we get a straight line.
The formula for this problem is s = vt which is similar to a straight line formula like y = mx + c.
If we put here c = 0 we get the formula for distance and velocity.
So the answer is A.
A point charge of +10 μC is at (+3 m, 0 m) on the x-axis and a point charge of +10 μC is at (-3 m,0 m).
a. Determine the work required to assemble this charge distribution.
W = ________ J
b. Find the magnitude of the electric field at a point (0,+3 m) on the y-axis.
E = __________ x103 N/C
A charge q = +1 μC is placed at this point. Find the magnitude of the force on the 1 μC charge.
c. A charge q= +1 μC is placed at a point (0,+3 m) on the y-axis. Find the magnitude of the force on the 1 μC charge.
F = ____________ x10-3 N
a)Therefore, the work required to assemble this charge distribution is approximately 0 J. b)Therefore, the magnitude of the electric field at a point (0, +3 m) on the y-axis is 90 kN/C. c)Therefore, the magnitude of the force on the 1 μC charge is 0.03 N (approximately) are the answers.
Given information: A point charge of +10 μC is at (+3 m, 0 m) on the x-axis and a point charge of +10 μC is at (-3 m,0 m).
a. Determine the work required to assemble this charge distribution. The work done to assemble this charge distribution is the sum of the work done to bring each charge to its respective position.
It can be calculated using the formula as follows;
W = (1/4πε0)(q1q2/r1 + q1q2/r2)
where
ε0 = permittivity of free space = 8.85 × 10−12 C2/Nm2q1
= +10 μC, q2 = +10 μCr1 = +3m,
r2 = +3m
W = (1/4πε0)(q1q2/r1 + q1q2/r2)
= (1/4π × 8.85 × 10−12 × 10 × 10 × 106 )/(3 + 3) J= 4.44 × 10−7 J ≈ 0 J (approximately).
Therefore, the work required to assemble this charge distribution is approximately 0 J.
b. Find the magnitude of the electric field at a point (0,+3 m) on the y-axis. The electric field at a point on the y-axis due to the charges can be calculated by using the formula as follows;
E = (1/4πε0)(q/r1^2 − q/r2^2),
where q = +10 μCr1 = +3m,
r2 = +3mE = (1/4πε0)(q/r1^2 − q/r2^2)
r2= (1/4π × 8.85 × 10−12 × 10 × 106 )/(32 − 32) N/C
r2= (1/4πε0)(q/r1^2)= (1/4π × 8.85 × 10−12 × 10 × 106 )/(3^2) N/C
r2= 9 × 10^4 N/C. To get the answer in kN/C,
the answer can be divided by 1000.
E = 9 × 10^4 x 10^-3 = 9 × 10^1 kN/C C = 90 kN/C.
Therefore, the magnitude of the electric field at a point (0, +3 m) on the y-axis is 90 kN/C.
c. A charge q= +1 μC is placed at a point (0,+3 m) on the y-axis. Find the magnitude of the force on the 1 μC charge.
The force on the 1 μC charge due to the charges can be calculated using Coulomb's law.
Coulomb's law is given by;
F = (1/4πε0)(q1q2/r^2)
where
ε0 = permittivity of free space = 8.85 × 10−12 C2/Nm2q1
= +10 μC, q2 = +1 μCr = +3mF
= (1/4πε0)(q1q2/r^2)
=(1/4π × 8.85 × 10−12 × 10 × 1 × 106 )/(3^2) N
= 2.96 × 10−2 N ≈ 0.03 N (approximately).
to know more about magnitude visit:
https://brainly.com/question/28714281
#SPJ11