We are making two fruit drinks, Red berry (R) and Green Mush (GM). The drinks contain a combination of cherry juice (C), cranberry juice (CB) and avocado (A). Red Berry sells for $9 a gallon and Green Mush sells for $11 a gallon. We need at least 100 gallons of red berry and 50 gallons of green mush. Cherry juice contains 400 units vitamin C per gallon, cranberry juice contains 350 units of vitamin C per gallon and avocado contains 200 units of vitamin C. Cherry juice costs $2 per gallon, cranberry juice $1.50, and avocado costs $5. Red Berry must contain at least 325 units of vitamin C per gallon. Green Mush must contain a minimum of 150 units of vitamin C. We have 50 gallons of cherry juice, 70 gallons of cranberry juice and unlimited supply of avocado juice.

The objective function is
One decimal place examples 4.0 or 4.1

Z =

______________ XC,RB+

_______________XCB,RB+

________________XA,RB+

________________XC,GM+

_________________XCB,GM+

___________________XA,GM

The constrint for minimum vitamin C for Red Berry is
No decimal places example 4 negatives as -4 not parenthesis
______________ XC,RB+

_______________XCB,RB+

________________XA,RB+0XC,GM+0XCB,GM+0XA,GM <=

____________________

Answer:

The next term will be -5.

Step-by-step explanation:

This is actually an AP with a = 11 and common difference d = -4.

Therefore next term will be -1 - 4 = -5

Answer:

Step-by-step explanation:

The numbers in this sequence come by subtracting 4 so

11, 7, 3, - 1, - 5, - 9, - 13

Answer:

15/

x

136

Step-by-step explanation:

im pretty sure

Answer:

0.11

Step-by-step explanation:

The desirable answer would be 0.11029411∞, and it would go on forever. Therefore, by rounding the designated number above, thou shall get 0.11.

I hope this is of good use.

Answer:

OA

Step-by-step explanation:

18+12=30

6×3=18

6×2=12

18+12=30

hope this helps

Answer:

Which of the following is equal to the expression listed below?

18 + 12

OA. 6(3+2)

OB. (6 x 3)(6 x 2)

OC. 6+ (3 x 2)

OD. (6 + 3)(6 + 2)

Step-by-step explanation:

the answer is (B)

The given question can be answered as follows:

True or False:

The ANOVA Test uses the entire bell. - False_

____ There are 2 types of hypotheses. - True_

____ The null hypothesis may posit that there is no significant difference between - True

Explanation:

ANOVA (Analysis of Variance) is a statistical test used to determine whether two or more population means are equivalent. It does not use the entire bell, so the statement is false.There are two types of hypotheses: the null hypothesis and the alternative hypothesis. The statement is true.The null hypothesis is used to determine if there is a significant difference between two or more sets of data. It can posit that there is no significant difference between two or more sets of data. So, the statement is true.

To know more about hypothesis.:

https://brainly.com/question/28331914

#SPJ11

The ANOVA Test uses the entire bell is a false statement.

There are 2 types of hypotheses is a true statement.

The null hypothesis may posit that there is no significant difference between the groups is a true statement.

Hence, the correct answer is: False; True; True.

The given statements can be summarized as follows: Statement 1 is that the ANOVA Test uses the entire bell. It is false.

Statement 2 is that there are 2 types of hypotheses. It is True.

Statement 3 is that the null hypothesis may posit that there is no significant difference between the groups. It is True.

Hence, the correct answer is: False; True; True.

To know more about hypothesis visit

https://brainly.com/question/23056080

#SPJ11

Answer:

are u ok tho

Step-by-step explanation:

The equations you mentioned:

1. y = xy:

To solve this differential equation, we can separate the variables and integrate both sides.

dy/y = x dx

Integrating both sides gives:

ln|y| = (1/2)x² + C

Exponentiating both sides gives the general solution:

|y| = [tex]e^{((1/2)x^2 + C)[/tex]

Taking the positive and negative values of y, we get two branches of solutions:

y = [tex]Ae^{(1/2)x^2[/tex] and y = [tex]-Ae^{(1/2)x^2[/tex], where A is an arbitrary constant.

2. xy = 2y:

Rearranging the equation, we get:

xy - 2y = 0

Factoring out y, we have:

y(x - 2) = 0

This equation has two solutions:

y = 0 and x - 2 = 0, which leads to x = 2.

3. y = [tex]e^x[/tex] - y:

Rearranging the equation, we get:

y + y = [tex]e^x[/tex]

Combining like terms, we have:

2y = [tex]e^x[/tex]

Dividing both sides by 2, we get:

y = (1/2)[tex]e^x[/tex]

4. y = (1 + y²)[tex]e^x[/tex]:

Rearranging the equation, we get:

y - y² = [tex]e^x[/tex]

Factoring out y, we have:

y(1 - y) = [tex]e^x[/tex]

This equation has two solutions:

y = 0 and 1 - y = [tex]e^x[/tex], which leads to y = 1 - [tex]e^x[/tex].

5. y = xy + y:

Rearranging the equation, we get:

y - xy - y = 0

Combining like terms, we have:

-xy = 0

This equation has two solutions:

x = 0 and y = 0.

6. y = y[tex]e^x[/tex] - 2[tex]e^x[/tex] + y - 2:

Rearranging the equation, we get:

y[tex]e^x[/tex] - y = 2[tex]e^x[/tex]- 2

Factoring out y, we have:

y([tex]e^x[/tex] - 1) = 2([tex]e^x[/tex] - 1)

Dividing both sides by ([tex]e^x[/tex] - 1), we get:

y = 2

7. y = x/(y + 2):

Rearranging the equation, we get:

y(y + 2) = x

Expanding the equation, we have:

y² + 2y - x = 0

This equation doesn't have a general solution in terms of elementary functions. It can be solved numerically or using approximation methods.

8. y = xy/(x - 1):

Rearranging the equation, we get:

(x - 1)y = xy

Dividing both sides by y and rearranging, we have:

x - 1 = x/y

Solving for y, we get:

y = x/(x - 1)

9. x²y = ylny - y:

This is a nonlinear differential equation that doesn't have a general solution in terms of elementary functions. It can be solved numerically or using approximation methods.

10. xy - y = 2x²y:

Rearranging the equation, we get:

xy - 2x²y - y = 0

Factoring out y, we have:

y(x - 2x² - 1) = 0

This equation has two solutions:

y = 0 and x - 2x² - 1 = 0, which leads to x = (1 ± √3)/2.

11. y - 3y² = x + 2y:

Rearranging the equation, we get:

-3y² + y + 2y - x = 0

Combining like terms, we have:

-3y² + 3y - x = 0

This equation doesn't have a general solution in terms of elementary functions. It can be solved numerically or using approximation methods.

12. y = (2xy + 2x)/(x² - 1):

Rearranging the equation, we get:

y(x² - 1) = 2xy + 2x

Expanding the equation, we have:

x²y - y = 2xy + 2x

Combining like terms, we get:

x²y - 2xy - y - 2x = 0

This equation doesn't have a general solution in terms of elementary functions. It can be solved numerically or using approximation methods.

Learn more about the general solution at

https://brainly.com/question/32062078

#SPJ4

Answer:

Where is the question so that I can help you with it

Answer:

step 5

Step-by-step explanation:

Answer:

The standard method for solving an equation like 3x + 5 = 26 is to use the Subtraction Property of Equality and then the Division Property of Equality.

Step-by-step explanation:

To solve, you subtract both sides by 5 first. Then you divide both sides by 3 to isolate the x.

Answer:

i think it is b

Step-by-step explanation:

Answer:

x = 12 the correct answer

Answer:

$2500

Step-by-step explanation:

First, multiply the $15 for the 150 people attending, to get 2250. Next, add the last $250 to get a total cost of $2500

Hopefully this helps- let me know if you have any questions!

Answer:

i think it is 2500

Step-by-step explanation:

take 15 times the amount of people. then add the 250 fee

The correct answer i.e. mean difference is (a) 0.

What is the mean difference?

The mean difference is a statistical measure that represents the average difference between pairs of values in a dataset. It is calculated by taking the sum of all the differences and dividing it by the total number of pairs.

To calculate the mean difference, follow these steps:

Identify the pairs of values in your dataset for which you want to calculate the difference.

Calculate the difference between each pair of values.

Sum up all the differences.

Divide the sum by the total number of pairs.

In a correlated t-test, the null hypothesis assumes that the mean difference between paired observations is zero, indicating no effect of the independent variable. Therefore, if the independent variable has no effect, the sample difference scores are expected to be a random sample from a population where the mean difference score, denoted as μd, equals 0.

Hence, the correct answer is (a) 0.

Learn more about the mean difference:

https://brainly.com/question/29004229

#SPJ4

Answer:

Explanation:

given f(x) = 3x - 1

for f(x) = 2

3x - 1 = 2

3x = 2 + 1

3x = 3

x = 3/3

x = 1

Answer:

B. 9

Step-by-step explanation:

Proportions are just like fractions and to figure them out sometimes you can use simplification in different forms.

[tex]\frac{x}{6}[/tex] = [tex]\frac{36}{24}[/tex]

Now to get to 6, 24 had to be divided by 4...in proportions and fractions usually, the top and bottom are both simplified or proportioned to the same number or scale

36 ÷ 4 = 9

Check your answer by inserting it there to see if it works

9*4 = 36            6*4 = 24

Answer:

[tex]\boxed {\boxed {\sf B. \ 9}}[/tex]

Step-by-step explanation:

We are given this proportion:

[tex]\frac {x}{6}=\frac{36}{24}[/tex]

We want to solve for x, so we must isolate the variable using inverse operations.

It is being divided by 6. The inverse of division is multiplication, so we multiply both sides of the proportion by 6.

[tex]6*\frac {x}{6}=\frac{36}{24}*6[/tex]

[tex]x=\frac{36}{24}*6[/tex]

[tex]x=1.5*6 \\x=9[/tex]

Another way to solve is with cross multiplication. Multiply the first numerator by the second denominator, then the first denominator by the second numerator.

[tex]\frac { x}{6}=\frac{36}{24}[/tex]

[tex]24*x=6*36[/tex]

[tex]24x=216[/tex]

The variable is being multiplied by 24. The inverse of multiplication is division, so we divide both sides of the equation by 24.

[tex]24x/24=216/24\\x=9[/tex]

The value of x that makes this proportion true is 9.

Let P be the vector space of polynomials of degree at most.

(a) is a subspace of P.

(b) is not a subspace of P.

(c) is a subspace of P.

(d) is a subspace of P.

(a) {p(x) = P₂|p(2)=0}

This subset consists of polynomials in P₂ that evaluate to 0 at x = 2. To check if it is a subspace, we need to verify the three conditions:

The zero polynomial is in this subset since it evaluates to 0 at x = 2.

Let p₁(x) and p₂(x) be two polynomials in this subset. If p₁(2) = 0 and p₂(2) = 0, then (p₁ + p₂)(2) = p₁(2) + p₂(2) = 0 + 0 = 0. Hence, the subset is closed under vector addition.

Let p(x) be a polynomial in this subset, and c be a scalar. If p(2) = 0, then (cp)(2) = c(p(2)) = c(0) = 0. Hence, the subset is closed under scalar multiplication.

Therefore, (a) is a subspace of P.

(b) {p(z) € P₂ | x-p'(x) + p(x) = 0}

This subset consists of polynomials in P₂ that satisfy the equation x - p'(x) + p(x) = 0. To check if it is a subspace, we need to verify the three conditions:

The zero polynomial is not in this subset since it does not satisfy the equation x - p'(x) + p(x) = 0.

If p₁(x) and p₂(x) are two polynomials in this subset, (p₁ + p₂)(x) = p₁(x) + p₂(x) satisfies the equation x - (p₁ + p₂)'(x) + (p₁ + p₂)(x) = 0. However, we need to check if it satisfies the equation x - (p₁ + p₂)'(x) + (p₁ + p₂)(x) = 0 for all x, not just at certain points. This condition may not hold, so the subset is not closed under vector addition.

Let p(x) be a polynomial in this subset, and c be a scalar. If we consider cp(x), the equation x - (cp)'(x) + cp(x) = 0 may not hold for all x, depending on the value of c. Therefore, the subset is not closed under scalar multiplication.

Therefore, (b) is not a subspace of P.

(c) {p(z) E P₂|p(0) = p(1)}

This subset consists of polynomials in P₂ that satisfy the equation p(0) = p(1). To check if it is a subspace, we need to verify the three conditions:

The zero polynomial is in this subset since it satisfies the equation p(0) = p(1) (both sides are 0).

If p₁(x) and p₂(x) are two polynomials in this subset, (p₁ + p₂)(x) = p₁(x) + p₂(x) satisfies the equation (p₁ + p₂)(0) = p₁(0) + p₂(0) and (p₁ + p₂)(1) = p₁(1) + p₂(1). Since p₁(0) = p₁(1) and p₂(0) = p₂(1), it follows that (p₁ + p₂)(0) = (p₁ + p₂)(1). Hence, the subset is closed under vector addition.

Let p(x) be a polynomial in this subset, and c be a scalar. If we consider cp(x), the equation (cp)(0) = (cp)(1) holds since p(0) = p(1). Hence, the subset is closed under scalar multiplication.

Therefore, (c) is a subspace of P.

(d) {ar² + (a + 1)x + b | a, b ∈ R}

This subset consists of all polynomials of the form ar² + (a + 1)x + b, where a and b are real numbers. To check if it is a subspace, we need to verify the three conditions:

The zero polynomial is in this subset since it can be written as 0r² + (0 + 1)x + 0 = x.

If p₁(x) and p₂(x) are two polynomials in this subset, their sum p₁(x) + p₂(x) is of the form ar² + (a + 1)x + b, where a and b are real numbers. Hence, the subset is closed under vector addition.

Let p(x) be a polynomial in this subset, and c be a scalar. Then cp(x) is of the form car² + (ca + c)x + cb, where a, b, and c are real numbers. Hence, the subset is closed under scalar multiplication.

Therefore, (d) is a subspace of P.

To learn more about subspace

https://brainly.com/question/31770630

#SPJ11

The quantified statement (∃x)¬D(x) can be translated into simple, everyday English as "There exists a penguin that is not dangerous."

The quantified statement (∃x)¬D(x) can be further explained in the context of penguins. Let's break it down:

The symbol (∃x) denotes the existence of an object or entity that satisfies a certain condition. In this case, it refers to a penguin that meets the condition specified afterward.

The predicate ¬D(x) can be understood as the negation of the predicate D(x), where D(x) represents the statement "x is dangerous." The negation symbol (¬) in front of D(x) indicates the opposite or negation of the statement.

Combining these elements, the quantified statement (∃x)¬D(x) asserts that there is at least one penguin for which the predicate "is not dangerous" holds true. In everyday English, this statement can be translated as "There exists a penguin that is not dangerous."

Essentially, it implies that within the domain of all penguins being considered, at least one penguin can be found that is not considered dangerous. This quantified statement allows for the possibility that not all penguins are dangerous and acknowledges the existence of non-threatening penguins.

To learn more about negation click here :

brainly.com/question/30478928

#SPJ11

Answer:

H0: μ = 7.0

H1: μ > 7.0

Step-by-step explanation:

The null hypothesis will equal and take up the value of the population mean value ;

The population mean value, μ is 7.0

Null hypothesis ; H0: μ = 7.0

The alternative hypothesis will align with the claim ; which will take up and side with the value and direction of the sample mean ; 7.82 micrograms/100 ml

7.82 > 7.0 (sample mean is greater Than the population mean).

Hence, the alternative hypothesis, H1 will be ;

H1 : μ > 7.0

Answer:

-11 degrees Fahrenheit.

Step-by-step explanation:

the higher the negative number is, the colder it gets <D

Answer:

0

Step-by-step explanation:

Apply Only the Outside and Inside Method of the Foil Method.

[tex]7 \times - \frac{1}{2} = - 3.5x[/tex]

[tex] \frac{1}{2} \times 7x = 3.5x[/tex]

Add them together

[tex] - 3.5x + 3.5x = 0[/tex]

So our b value is 0.

Answer: x= 4y/7 - 1/7

7x/4+ 1/4

Step-by-step explanation:

Answer:

.02

Step-by-step explanation:

a. For the function f(x) = (x + x)(log(x) + 3x) is O(x) with the witnesses C = 7 and k = 1.

b. It is proved that f(x) = (x + x)(log(x) + 3x) is (x) with the witnesses C = 1 and k = 1.

c. The obtained witnesses C = 1, C' = 10, and k =[tex]10^C.[/tex] such that g(x)log(x) < Cg(x) whenever x > k. And g(x) = 1.

a) To show that f(x) = (x + x)(log(x) + 3x) is O(x),

find witnesses C and k such that f(x) ≤ C × x for all x > k.

Let's simplify the expression for f(x):

f(x) = 2x × (log(x) + 3x)

= 2x × log(x) + 6x²

Now, find a witness C and a value k such that f(x) ≤ C × x for all x > k.

Let's choose C = 7 and k = 1.

This means show that f(x) ≤ 7x for all x > 1.

For x > 1,

f(x) = 2x × log(x) + 6x²

< 2x × log(x) + 6x² + 7x

= 2x × log(x) + 6x² + 7x

= x(2log(x) + 6x + 7)

≤ x(2log(x) + 13x)

≤ x × 7

= 7x

This implies,

f(x) = (x + x)(log(x) + 3x) is O(x) with the witnesses C = 7 and k = 1.

b) To show that f(x) = (x + x)(log(x) + 3x) is (x),

find witnesses C and k such that f(x) ≥ C × x for all x > k.

Let us simplify the expression for f(x):

f(x) = 2x × (log(x) + 3x)

= 2x × log(x) + 6x²

Now, find a witness C and a value k such that f(x) ≥ C × x for all x > k.

Let us choose C = 1 and k = 1.

This means show that f(x) ≥ x for all x > 1.

For x > 1,

f(x) = 2x × log(x) + 6x²

> x × log(x) + 6x²

= x(log(x) + 6x)

≥ x(log(x) + x)

≥ x × log(x)

≥ x

Therefore, we have shown that f(x) = (x + x)(log(x) + 3x) is (x) with the witnesses C = 1 and k = 1.

c) To find the obtained witnesses C, C', and k .

such that g(x)log(x) < Cg(x) whenever x > k,

Examine the expression f(x) = (x + x)(log(x) + 3x) and determine the function g(x).

Let us simplify the expression for f(x),

f(x) = 2x × (log(x) + 3x)

= 2x × log(x) + 6x²

From the given condition, we have g(x)log(x) < Cg(x) rewrite this as,

log(x) < C

Since log(x) is an increasing function, if log(x) < C, it means x < [tex]10^C.[/tex]Therefore, the witness k is [tex]10^C.[/tex]

Now let us determine g(x).

Since g(x)log(x) appears in the inequality, we can take g(x) = 1.

C = 1, C' = 10, and k = [tex]10^C.[/tex] for g(x)log(x) < Cg(x) whenever x > k. And g(x) = 1.

Learn more about function here

brainly.com/question/29182644

#SPJ4

Answer:

16%

Step-by-step explanation:

(174-150)/150= 0.16

0.16*100 = 16%

The main effects of the relevant variables are 3.5x and -1.6x, while the interaction effect is 0.9x*x.

The given model for manufacturing yield, expressed as a percentage of good products, is represented by the equation ỹ = 95 + 3.5x - 1.6x + 0.9x*x. In this equation, x represents the reactor temperature, and X2 represents the air pressure.

The coefficient 3.5 corresponds to the main effect of the reactor temperature, indicating that for each unit increase in temperature, the yield is expected to increase by 3.5 percentage points.

Similarly, the coefficient -1.6 represents the main effect of air pressure, implying that for each unit increase in pressure, the yield is expected to decrease by 1.6 percentage points.

Additionally, the term 0.9x*x accounts for the interaction effect between temperature and pressure. This suggests that the combined influence of temperature and pressure on the yield is not solely determined by the sum of their individual effects. Instead, the interaction effect captures the nonlinear relationship between these variables.

To estimate the probability of the yield being higher than 96% for a temperature of 315K and pressure of 130kPa, we need to evaluate the model equation for these specific values.

Substituting x = 315 and X2 = 130 into the equation, we can calculate the corresponding yield. If the yield exceeds 96%, the estimated probability would be 100%; otherwise, it would be 0%.

Learn more about main and interaction effect

brainly.com/question/29753991

#SPJ11

A class interval refers to option b) a division used for grouping a set of observations.

The correct answer is (b) a division used for grouping a set of observations. In statistics, when dealing with a large set of data, it is often helpful to group the data into intervals or classes to better understand the distribution. A class interval represents a range of values that are grouped together. It is defined by specifying the lower and upper boundaries of each interval.

For example, if we are analyzing the heights of individuals, we may create class intervals such as 150-160 cm, 160-170 cm, and so on. The purpose of using class intervals is to simplify the data and provide a clearer picture of the distribution. It allows us to summarize the data and identify patterns or trends within specific ranges. Therefore, option (b) is the correct description of a class interval.

Learn more about interval here:

brainly.com/question/11051767

#SPJ11

Answer:

50

Step-by-step explanation:

this can be solved by ratio   15/x = 30/100.  Cross multiply and solve for x.  The answer is 50.

Answer:

-1(3x^2) +4x-7

Step-by-step explanation:

grouping

Answer:

Monthly deposit= $489.59

Step-by-step explanation:

Giving the following information:

Future Value (FV)= $180,000

Number of periods (n)= 18*12= 216

Interest rate (i)= 0.055 / 12= 0.004583

To calculate the monthly deposit, we need to use the following formula:

FV= {A*[(1+i)^n-1]}/i

A= monthly deposit

Isolating A:

A= (FV*i)/{[(1+i)^n]-1}

A= (180,000*0.004583) / {[(1.004583)^216] - 1}

A= $489.59