Answer:
There are several disadvantages of using ionic compounds and covalent compounds in domestic settings:
> Ionic compounds are generally less stable and less resistant to changes in temperature and humidity than covalent compounds. This means that they may degrade or decompose over time, leading to reduced effectiveness or even hazards.
> Ionic compounds often have a high melting point and boiling point, making them difficult to handle and store. They may also be sensitive to heat, light, or moisture, which can affect their stability and performance.
> Ionic compounds can be corrosive and toxic, making them potentially harmful to humans and animals. Some ionic compounds, such as bleach and ammonia, can cause respiratory issues and skin irritation.
> Covalent compounds can be expensive to manufacture, as they often require specialized equipment and high temperatures and pressures to synthesize. This can make them less cost-effective for domestic use.
> Covalent compounds may also have a low melting point and boiling point, making them prone to decomposition or evaporation. They may also be flammable or explosive, posing a risk of fire or explosion in domestic settings.
Overall, it is important to carefully consider the properties and potential risks of using ionic and covalent compounds in domestic settings, and to follow safety guidelines and instructions for handling and storing these substances.
a 1.4g sample of pure gas occupies a volume of 981 mL at 42°C and 117 kPa. Determine the molar mass of the compound.
Answer:
51 g/mol. Explanation: Whenever you see molar masses in gas law questions, more often than not density will be involved.
Albino trees exist in nature, but they’re rare. These trees contain a gene mutation that causes them to lack chlorophyll, so their leaves are white. In California, albino redwood trees are parasites. They survive off the energy from nearby redwood trees. Why do you think they need to use energy from other trees to survive?
Answer:
They need to use energy from other tress to survive so that they can do basic functions, like absorbing nutrients from the ground, and growing back leaves. They don't have chlorophyll, so they need that energy to do the functions I mentioned above.
Explanation: Hope this helps!
Answer:
Trees need chlorophyll to make energy. Because albino trees don’t have chlorophyll, they can’t create their own energy. So, they must take energy from other trees to survive.
Explanation:
What is the pH of a 4.7 x 10-9 M HCl solution? *
4.67
8.33
11.21
2.93
which gas would diffuse rapidly at the same temperature and pressure UF6 or CL2
Answer:
UF6
Explanation:
When mechanical energy is transformed,
A.
potential energy remains unchanged.
B.
heat is given off.
C.
kinetic energy remains unchanged.
D.
friction is encountered.
Answer:
kinetic energy remains unchanged
I need help answer with right answer
Answer:
I think it would be D
Explanation:
Which of the following is true of all stars? A) they produce energy and radiation B) they have about the same temperature c) they are generally the same size and color D) they produce energy for the same length of time
Answer:
A)
Explanation:
All stars produce some type of energy and radiation. But stars vary in temperature, size, color, and the length of energy they produce.
Circle the letter next to each sentence that is true concerning the compressibility of gases. a. The large relative distances between particles in a gas means that there is considerable empty space between the particles. b. The assumption that particles in a gas are relatively far apart explains gas compressibility. c. Compressibility is a measure of how much the volume of matter decreases under pressure. d. Energy is released by a gas when it is compressed.
Answer:
The large relative distances between particles in a gas means that there is considerable empty space between the particles.
The assumption that particles in a gas are relatively far apart explains gas compressibility.
Compressibility is a measure of how much the volume of matter decreases under pressure.
Energy is released by a gas when it is compressed
Explanation:
The kinetic molecular theory establishes that gases are composed of molecules. These molecules of gas are far apart from each other hence there is a considerable empty space between the gas molecules. As a result of these empty spaces between gas molecules, it is possible to compress a gas.
Compressibility is defined as a measure of how much the volume of matter decreases under pressure. When a gas is compressed, work is done on the gas and energy is evolved hence the gas heats up.
A basketball inflated to a pressure of 2.25 atm is increased in temperature from 275 K to 317 K.What will be the new pressure, in torr, if the volume remains constant?
Answer:
[tex]P_2=1971.2torr[/tex]
Explanation:
Hello there!
In this case, by recalling the Gay-Lussac's gas law, as a directly proportional relationship between pressure and temperature, we can write:
[tex]\frac{P_2}{T_2} =\frac{P_1}{T_1}[/tex]
Thus, by solving for the required final pressure, in atmospheres first, we solve for P2 as follows:
[tex]P_2 =\frac{P_1T_2}{T_1}\\\\P_2=\frac{2.25atm*317K}{275K}\\\\P_2=2.59atm[/tex]
Which in Torricelli is:
[tex]P_2=2.59atm *\frac{760torr}{1atm}\\\\P_2=1971.2torr[/tex]
Best regards!
I NEED HELP ASAP!! What is the difference between the experimental group and a control group?
I believe the control group is what doesn't change in the experiment, and the experimental group is what is being tested / receives the treatment :)
What is the percent composition of water found in tin (IV) oxide octahydrate?
Answer:
tin (IV) oxide octahydrate contains 8 part water
What is the percent composition of water found in tin (IV) oxide octahydrate?
The pH of a solution is 9.67. Calculate [H+] for the solution
Answer:
2.14 x 10^-10 M
Explanation:
[H+] = 10^(-pH) = 10^-9.67 = 2.14 x 10^-10 M
A projectile is projected with an initial velocity of 40 m/s at a 45o angle to the horizontal. , calculate the total time travelled.
Answer:
5.77 s
Explanation:
From the question,
The total time travelled by the projectile = Time of flight (T)
T = 2usinθ/g............ Equation 1
Where T = Time of Flight of the projectile, u = Initial velocity, θ = Angle of projection to the horizontal, g = acceleration due to gravity
Given: u = 40 m/s, θ = 45°
Constant: g = 9.8 m/s²
Substitute these values into equation 1
T = 2(40)sin(45°)/9.8
T = 80sin(45°)/9.8
T = 80×0.7071/9.8
T = 5.77 s
What volume of DI water, in mL, must you use to dissolve 30.0 g of NaOH in order to make a 1.25 M solution? mL (round to whole number)
Answer:
600mL
Explanation:
Molarity of a solution (M) = number of moles (n) ÷ volume (V)
number of moles = mass/molar mass
Molar mass of NaOH = 23 + 16 + 1
= 40g/mol
mole = 30/40
n of NaOH = 0.75mol
Using Molarity = n/V
V = number of moles ÷ molarity
V = 0.75 ÷ 1.25
V = 0.6L
In milliliters (mL), the volume of NaOH will be 0.6 × 1000
= 600mL
HELPPPPP MEEEEE ASAPPP
According to the diagram above, when the north end of the Earth’s axis is tilted toward the sun, explain the suns effect on the North America.
A. North America will experience more indirect rays and shorter days
B. North America will experience more indirect rays and longer days.
C. North America will experience more direct rays and shorter days
D. North America will experience more direct rays and longer days.
Answer:
the answer is D
Explanation:
brainliest?
All of the facts about our star the Sun listed below are true EXCEPT which option?
A. the sun is the smallest object in our Solar System.
B. the sun is an average-sized yellow star.
C. the sun is located in an arm of the spiral shaped Milky Way galaxy.
D. the sun appears brighter because it is much closer to Earth than other stars
Answer:
A
Explanation:
The sun is the smallest object in our solar system
Answer:
A. the sun is the smallest object in our solar system
Explanation:
In 2009, the Hubble Space Telescope discovered the smallest object ever seen in visible light at the time within the Kuiper Belt. The Kuiper Belt Object (KBO) found was a mere 3,200 feet (975 meters) across and was 4.2 billion miles away.
PLEASE PLEASE PLEASE HELP:
An unknown material has 389 J of heat energy added to it. If its specific heat capacity is 0.371 J/g*C and 58 g were affected, what was the temperature increase?
define the term pure substance
Answer:
Pure substances are substances that are made up of only one kind of particles and has a fixed or constant structure. Pure substances are further classified as elements and compounds. An element is a substance that consists of only one type or kind of atom
Answer:
define the term pure substance :
A pure substance does not have to be of a single element or compound, This can either be one single element or one single compound, but every sample of this substance that you examine must contain exactly the same thing with a fixed, definite set of properties
Explanation:
How many grams of KOH are needed to make 0.500 L of a 0.10 M solution
Answer:
2.8 g KOH
Explanation:
We can find the amount of moles we need by multiplying 0.500 L and the molarity given, 0.10 M (molarity is moles of solute divided by liters of solution). The liters cancel out, leaving us with moles; we can then take the moles and convert it to grams of KOH by using the molar mass of KOH.
0.500 L x 0.10 mol/1 L x 56.106 g /1 mol = 2.8 g KOH (two significant figures)
In q = mCΔT, what does C stand for?
Answer:
The symbol c stands for specific heat and depends on the material and phase. The specific heat is the amount of heat necessary to change the temperature of 1.00 kg of mass by 1.00ºC.
At what temperature would the volume of a gas be 0.550 L if it had a volume of 0.432 L at –20.0°C? Be careful! This is not in the correct units for temperature.
Answer:
49.2°C is the temperature
Explanation:
Based on Charles's law, the absolute temperature of a gas is directly proportional to the volume under constant pressure. The equation is:
V1 / T1 = V2 / T2
Where V is volume and T is absolute temperature of 1, initial state and 2, final state of the gas.
Computing the values of the problem:
V1 = 0.432L
T1 = -20.0°C + 273.15K = 253.15K
V2 = 0.550L
T2 = ?
0.432L / 253.15K = 0.550L / T2
322.3K = T2
322.3K - 273.15 =
49.2°C is the temperatureWhat properties can be used to identify puree substances?
Explanation:
1 it easily won't break down using any chemical
2 it is difficult to extract it using chemical process
mark me please
The initial pressure of 0.31 moles of gas in a drum is 742 torr. If gas is added to the drum and the final pressure is 759 torr, how many moles of gas are in the drum? Hint: for this problem, you do not have an equation in the Introduction section, but based on the relationship between pressure and volume, what can you determine about the relationship between pressure and the number of moles?
Answer:
0.3171 moles
Explanation:
The computation of the number of moles of gas in the drum is shown below;
The ideal gas equation is
PV = nRT
where
P denotes the pressure of the gas
V denotes the volume of the container
n denotes the number of moles of gas
R denotes the Gas constant
T denotes the temperature
Also P proportionate to n
Now the following formula should be used
P_1 ÷ P_2 = n_1 ÷ n_2
742 ÷ 759 = 0.31 ÷ n_2
n_2 = 759 × 0.31 ÷742
= 0.3171 moles
Predict the shape of the molecule.
Answer: circle
Explanation:
What is the pH of a solution that has a pOH of 5.9
Answer:
pH = 8.1
Explanation:
Assuming that we are at 25 degrees Celsius, pH + pOH = 14.
We can then plug in the given pOH and solve for pH:
pH + pOH = 14
pH + 5.9 = 14
pH = 14 - 5.9 = 8.1
How many Joules are required to heat 40g of water from 13°C to 40°C?
J
Answer: 1080
Explanation:
you have to subtract 40 from 13 frist then multiply the remins of the temeture with 40 and your answer is 1080
17. When you hold a soda can in your hand, you possess trillions and trillions of aluminum atoms. In one paragraph, using
your own words, explain how ions of aluminum atoms would generally interact based on their charges, and how that
interaction is overcome through metallic bonding to form the can that you hold.
PLEASE PUT REAL ANSWER OR I WILL REPORT YOU
MARKING BRAINLYEST TO FIRST PERSON
In the early 1900's, Paul Drüde came up with the "sea of electrons" metallic bonding theory by modeling metals as a mixture of atomic cores (atomic cores = positive nuclei + inner shell of electrons) and valence electrons. Metallic bonds occur among metal atoms. Whereas ionic bonds join metals to non-metals, metallic bonding joins a bulk of metal atoms. A sheet of aluminum foil and a copper wire are both places where you can see metallic bonding in action.
Metals tend to have high melting points and boiling points suggesting strong bonds between the atoms. Even a soft metal like sodium (melting point 97.8°C) melts at a considerably higher temperature than the element (neon) which precedes it in the Periodic Table. Sodium has the electronic structure 1s22s22p63s1. When sodium atoms come together, the electron in the 3s atomic orbital of one sodium atom shares space with the corresponding electron on a neighboring atom to form a molecular orbital - in much the same sort of way that a covalent bond is formed.
The difference, however, is that each sodium atom is being touched by eight other sodium atoms - and the sharing occurs between the central atom and the 3s orbitals on all of the eight other atoms. Each of these eight is in turn being touched by eight sodium atoms, which in turn are touched by eight atoms - and so on and so on, until you have taken in all the atoms in that lump of sodium. All of the 3s orbitals on all of the atoms overlap to give a vast number of molecular orbitals that extend over the whole piece of metal. There have to be huge numbers of molecular orbitals, of course, because any orbital can only hold two electrons.
The electrons can move freely within these molecular orbitals, and so each electron becomes detached from its parent atom. The electrons are said to be delocalized. The metal is held together by the strong forces of attraction between the positive nuclei and the delocalized electrons Hope this helped
Blood is made up of red and white blood cells, platelets and ______.
Find the interquartile range
blood is made up of red and white blood cells, platelets and plasma
Question :What's oxidation?
Answer:
The process or result of oxidizing or being oxidized.(Rust)
Explanation:
Pluto
Which molecule is shown below?
H
H-C-H
The
H Η Η Η Η
H-Ċ-Ċ-Ċ-Ċ -C-0-H
11 11 1
Η Η Η Η Η Η
A. 2-ethylhexane
B. 2-methylhexane
C. 3-methylhexane
D. 3-ethylhexane
Answer:
2-methylhexane
Explanation:
just took it the quiz
2-methylhexane is the molecule shown below. Hence option B is correct.
What is Molecule and atom ?Atom is smallest entity of a body. Body is made up of atoms. it is basic building block of a body. An atom consist of electrons, protons and neutrons as sub atomic particle. whole mass of the atom is concentrated at the center of the atom which we call it as nucleus, nucleus consist of proton and neutron. Electron revolve around the nucleus at determined(fixed) orbit. Total number of protons in the atom decides the atomic number and the elements in the periodic table.
Molecule is made up of atoms, it is formed when two or more atoms bound together. The electrons in the outermost orbit are responsible for the molecule formation. Electrons are shared by the atoms in the entire molecule.
In this problem the structure shown in this figure is a structure of 2-methylhexane. Hence option B is correct.
To know more about chalcogenides :
https://brainly.com/question/29215809
#SPJ7.