A inverse relationship in between photon's energy (E) and the light's wavelength is described by the formula E=hcE=hc, where h has so far been Planck's constant and c is actually the speed of light.
What connection exists between light frequency and energy?Energy --> Frequency The energy of light increases with its frequency.
Higher frequencies result in shorter wavelengths, as the challenges mentioned above demonstrate.E is also equal to h c / λ.Short wavelengths & high energies characterize high frequency light.
Does the energy of light and its frequency have an inverse relationship?Energy is inversely correlated with wavelength because it is directly related to a electromagnetic frequency of the photon.The energy of a photon increases with its frequency.
To know more about frequency visit:
https://brainly.com/question/5102661
#SPJ4
A charge of +3.5 nC and a charge of +5.0 nC are separated by 40 cm. Find the equilibrium position for a -6.0 nC charge.
Answer: [tex]18.22\ cm[/tex] from [tex]3.5\ nC[/tex] charge.
Explanation:
Given
The magnitude of the first charge is [tex]Q_1=3.5\ nC[/tex]
The magnitude of the second charge is [tex]Q_2=5\ nC[/tex]
[tex]-6\ nC[/tex] charge must be placed in between the two charges to establish equilibrium
The electrostatic force is given by
[tex]F=\dfrac{kq_1q_2}{r^2}[/tex]
Equilibrium will be established when force by both the charges balance out each other. Suppose [tex]-6\ nC[/tex] is placed at a distance of [tex]x[/tex] cm from [tex]3.5\ nC[/tex] . So, we can write
[tex]\Rightarrow \dfrac{k(3.5)(-6)}{x^2}=\dfrac{k(5)(-6)}{(40-x)^2}[/tex]
Canceling similar terms
[tex]\Rightarrow \left [ \dfrac{40-x}{x}\right ]^2=\dfrac{10}{7}\\\\\Rightarrow \dfrac{40-x}{x}=\sqrt{\dfrac{10}{7}}=1.195\\\\\Rightarrow 40-x=1.195x\\\Rightarrow 40=2.195x\\\Rightarrow x=18.22\ cm[/tex]
Thus, the equilibrium position is [tex]18.22\ cm[/tex] from [tex]3.5\ nC[/tex] charge.
Answer:
What school do you go to?
Explanation:
1.Wave motion that is parallel to the wave direction is described
as_____________ wave.
2. The time to make one complete cycle is _____________.
3. The distance between successive crests of a wave is __________.
4. Wave motion that is perpendicular to wave direction describes a
_____________ wave.
5. The number of waves that passes a given point in time is__________.
6. ____________ is a kind of wave that does not need a medium.
7. The highest point of a wave is called ___________.
8. The unit for frequency is ____________.
9. The part of a longitudinal wave where there are fewer particles is
called______________.
10. A region in a medium of longitudinal wave where molecules are
packed is called _____________.
Answer:
Explanation:
A wave is a phenomenon that travels through a material medium without any permanent effect on the medium. It can be classified as mechanical or electromagnetic waves. And the two major types are transverse and longitudinal.
From the given question;
1. Longitudinal waves e.g sound waves, waves in a spring'
2. Frequency (number of cycles per second).
3. Wavelength of the wave. Measured in meters.
4. Transverse waves e.g light waves, water waves.
5. Wave speed.
6. Electromagnetic waves e.g ultraviolet waves, X-rays etc.
7. Amplitude.
8. Hertz.
9. Rarefaction
10. Compression
A wave is a phenomena that flows across a material medium without leaving any lasting mark.
1.Wave motion that is parallel to the wave direction is described
as longitudinal wave.
What is wave?A wave is a phenomena that flows across a material medium without leaving any lasting mark. Mechanical or electromagnetic waves can be used to classify it. Transverse and longitudinal are the two main forms.
1.Wave motion that is parallel to the wave direction is described
as longitudinal wave.
2.Frequency is defined as the number of cycles per second.. The time to make one complete cycle is frequency.
3.Wavelength of the wave is measured in meters.The distance between successive crests of a wave is wavelength.
4. Examples of Transverse waves are light waves, water waves.. Wave motion that is perpendicular to wave direction describes transverse wave.
5.The number of waves that passes a given point in time is Wave speed.
6.Examples of Electromagnetic waves are ultraviolet waves, X-rays etc.
Electroimegnetic wave is a kind of wave that does not need a medium.
7.The highest point of a wave is called amplitude.
8.The unit for frequency is Hertz.
9. A region in a medium of longitudinal wave where molecules are Rarefaction.
10. A region in a medium of longitudinal wave where molecules are
packed is called compression.
To learn more about the wave refer to the link;
https://brainly.com/question/3004869
The semi-major axis of this ellipse is 8.8 cm, and the distance from one of the foci to the
center is 4.4 cm. What is the eccentricity of the ellipse?
The eccentricity is 0.5
What is addictive about vaping?
Answer:
nicotine obviously
Explanation:
If a car moves 12 km north, 19 km east, and 12 km south, what is its displacement?
Answer:
19 km.
..............
Explanation:
.....
Answer:The Distance is 43 and displacement is 5km south
Explanation: To find the distance you add up all the numbers which was 43 and to fine the displacement subtract all the numbers and since all the other numbers were out expect for -5 which was south you would put 5 km south , if the number has a negative on it , it doesnt matter.
A 30 gram ball rolls along a flat surface at a constant speed in the same direction over 4 meters in 20 seconds. Which is the speed of the
ball? (speed = distance = time)
A. 0.2 meters per second
OB. 0.5 meters per second
c. 20 meters per second
D. 80 meters per second
Please answer this FAST!
Look at the circuit diagram. A rectangular box of lines with the long horizontal side. The left side has a circle with an X in it. The top side from left has a small circle connected to another small circle by a horizontal line and then a circle with an X in it. The right side from the top has a small circle connected to another small circle by a horizontal line and then a circle with an X in it. The bottom side has a stack of vertical lines, which are from left short, very short, short, very short. What does the diagram show? one battery, two light bulbs, and three resistors one battery, two switches, and three light bulbs one switch, one resistor, and three light bulbs one switch, one light bulb, and three batteries
Answer:
it is b on edge not d, well atleast for me it was b
Explanation:
Answer:
B) one battery, two switches, and three light bulbs
Explanation:
do opposite poles repel
true or false?
Answer:
false
Explanation:
like poles repel and opposite poles attract. :)
Opposite poles attractc each other.
Same poles repels each other.
A truck with a mass of 15,000 kg moving at 25 m/s crashes into the back of a small 1,100 kg car moving at 15 m/s. They
stick together after the collision. Calculate the momentum of the system before the collision and after the collision.
Explanation:
Given that,
Mass of a truck = 15,000 kg
Speed of the truck = 25 m/s
Mass of car = 1,100 kg
Speed of the car = 15 m/s
As they stick together after the collision. Let V be the speed after the collision.
Initial momentum of the system,
[tex]P_i=15000\times25+1100\times15\\\\=391500\ kg-m/s[/tex]
Final momentum of the system,
[tex]P_f=(15000+1100)V\\\\=16100V[/tex]
Hence, this is the required solution.
Which of the following best describes the term thermal energy? Choose one: A. The energy of an object in motion due to its mass B. The kinetic energy of atoms, ions, and molecules C. The energy stored in an object because of its position D. The energy a particle has because of its charge and its position relative to another particle Part 2 (0.5 point)See Hint Which of the following best describes the term electrostatic potential energy?
Answer:
The correct option is (d).
Explanation:
The energy a particle has because of its charge and its position relative to another particle is called thermal energy. It is the energy that comes from heat. This is generated by the movement of the particles in an object.Thermal energy is the energy an object or system has due to the movement of particles within.Hence, the correct option is (d).
The thermal energy is related to the kinetic energy of atoms, ions, and molecules.
What is thermal energy?The thermal energy of any material is defines as the increase in the internal energy of the material.
When ever heat is given to the material, the atoms and the molecules in the material gains energy and moves with a kinetic energy.
The increase in kinetic energy allows the atoms and the molecules to move with higher velocities in the material, and they collide with each other, thus the temperature of the material increases.
Thus the thermal energy is related to the kinetic energy of atoms, ions, and molecules.
To know more about Thermal energy follow
https://brainly.com/question/19666326
A 20 g block of ice is cooled to −65 ◦C. It
is added to 570 g of water in an 76 g copper
calorimeter at a temperature of 26◦C.
Find the final temperature. The specific
heat of copper is 387 J/kg ·
◦C and of ice is
2090 J/kg ·
◦C . The latent heat of fusion of
water is 3.33 × 10^5
J/kg and its specific heat
is 4186 J/kg ·
◦C .
Answer in units of ◦C.
Answer:
The final temperature is approximately 23.55°C
Explanation:
The given parameters are;
The mass of the ice block, m₁ = 20 g
The initial temperature of the block, T₁ = -65°C
The mass of the water to which the block is added, m₂ = 570 g
The mass of the copper container containing the water, m₃ = 76 g
The initial temperature of the water and the copper, T₂ = 26°C
The specific heat capacity of copper, c₃ = 387 J/(kg·°C)
The specific heat capacity of ice, c₄ = 2,090 J/(kg·°C)
The latent heat of fusion of ice, l = 3.33 × 10⁵ J/kg
The specific heat capacity of water, c₁ = 4,186 J/(kg·°C)
We have;
ΔQ = m₁·c₁·ΔT + m₁·l = m₂·c₂·ΔT + m₃·c₃·ΔT
Therefore, we get;
20 × 2,090 × -65 + 20 × 3.33 × 10⁵ + 20 × T × 4,186 = 570 × 4,186 × (26 - T) + 76 × 387 × (26 - T)
Using a graphing calculator, we get;
83720·T + 3943000 = 62801232 - 2415432·T
The final temperature, T ≈ 23.55 °C
If a girl carries groceries up a flight of stairs, is she doing work on the groceries? Explain.
Answer:
Explanation:
Yes she is doing work. With or without the groceries, she is still doing work. She does more work with the groceries than without because Work is defined by F which is defined by mass. The mass increases with the groceries.
The work done is against the force of gravity.
A car travels for 10s at a steady speed of 20 m/s along a straight road. The traffic lights ahead change to red, and the car slows down with a constant deceleration, so that it halts after a further 8s.
Answer:
The right solution is "2.5 m/s²". A further explanation is given below.
Explanation:
The given values are:
Initial velocity,
= 20 m/s
Final velocity,
= 0 m/s
Time,
= 8 s
As we know,
⇒ [tex]Acceleration=\frac{Final \ velocity-Initial \ velocity}{2}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{0-20}{8}[/tex]
⇒ [tex]=\frac{-20}{8}[/tex]
⇒ [tex]=-2.5 \ m/s^2[/tex]
why doesn't every planet have a moon?
Answer:
Up first are Mercury and Venus. Neither of them has a moon. Because Mercury is so close to the Sun and its gravity, it wouldn't be able to hold on to its own moon. Any moon would most likely crash into Mercury or maybe go into orbit around the Sun and eventually get pulled into it.
How do you rationalize the tension being used in Tennis Racket strings using the concept of impulse and momentum?
Answer:
The momentum, ΔP, and therefore, kinetic energy given to the ball in a serve is the result of the product of the tension force, 'F', in the string and the time of contact, Δt, between the ball and the string
ΔP = F × Δt
Explanation:
The impulse, ΔP, is the produce of the force, 'F', applied to a body for a given period of time, Δt', that gives motion to the body, and it is equal to the change of momentum of the body
ΔP = F × Δt
The momentum, 'P', of a body is the product of the mass, 'm', of the body and its velocity, 'v'
P = m × v
Tension is the axial pulling force of a string
T = Axial Force, F[tex]_{axial}[/tex]
The tension used in Tennis Racket strings is between 40 to 65 lbs.
When high tension is used in the string, the string is taut, and the contact duration between the Racket string and the ball is minimal, and the player needs to use more force to obtain a high momentum, and therefore, energy in the ball, which reduces control, and increase stress, as force is more emphasized
When low tension is used in the string, the Tennis Racket strings are more elastic. During a serve, the ball pushes the strings further back into the racket, such that the ball spends more time in contact with the string, (Δt is larger), and therefore, the impulse, F·Δt = ΔP, given to the ball is larger, therefore, the ball has a larger change in momentum, and therefore more energy in the intended direction.
However, a very slackened string will increase the increase area and time (large Δt) of contact of the ball and the racket such that the force given to the ball, F = ΔP/(large Δt) is reduced and therefore reduce the likelihood of gaining points from a serve against an opponent with a much forceful return of a serve.
PLEASE EXPLAIN IN TWO PARAGRAPHS (A PARAGRAPH IS 4-5 SENTENCES) SOME HEALTHFUL TIPS THAT CAN HELP PREVENT YOU FROM GETTING PHYSICAL FITNESS INJURIES.
Answer:
A workout injury can happen to anyone, no matter your experience or fitness level. People hurt themselves in all kinds of ways when they work out. Even walking can cause an injury. But you can significantly cut your risk of getting hurt by following certain workout precautions. There are simple steps that can help keep you injury-free during your workout.
Every workout should begin with a warm-up and end with a cool-down period. A warm-up helps your body get ready for exercise. It gradually increases your heart rate and loosens your muscles and joints. Cool-down after you work out so, it brings your heart rate back to normal. Walking for 5 to 10 minutes after you work out is one way to cool down. Do dynamic stretching before and after you work out. This will help increase flexibility. Don't push yourself too hard. As your fitness abilities increase and you will be able to challenge yourself more.
Hope this helps
Maintaining physical fitness is very important in today's world. Each and everyone should be involved in physical fitness.nowaday people are so busy with their work that they have forgotten health is wealth.
Even if we get engaged in physical fitness activity we can some time get insuries . some of tips that can help prevent from getting physical fitness injury, warm up exercises should be done before exercise to avoid muscle strength.safety precautions should be taken if you are dealing with heavy objects .
hence we should maintain physical fitness with getting rid of injury that may occur
mark me
A baseball sits motionless near first base on a baseball diamond. What statement best explains why the baseball remains motionless?
Answer:
Explanation:
Newton's first law states that, if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force. This postulate is known as the law of inertia.
hope this helps :))
There is no force acting on the baseball the statement best explains why the baseball remains motionless.
What is inertia?A body wants to remain in its original position until or unless the external force is not applied to it. Such a phenomenon is known as inertia.
Newton's first law asserts that if a body is at rest or traveling at a uniform speed in a straight direction,
It will remain at rest or continue to move in a straight path at a constant speed until acted on by a force. This is referred to as the law of inertia.
There is no force acting on the baseball the statement best explains why the baseball remains motionless.
Hence option B is correct.
To learn more about the inertia refer to the link;
https://brainly.com/question/3268780
The _____________ variable is observed, measured, and affected by the independent variable.
Answer: It would be the dependent variable.
Explanation:
The dependent variable is limited and can be affected by the changes and manipulation of the independent variable.
is silver magnetic or not ?
Answer:
Yes, but its magnetic power is very weak so its not that noticeable to the average person whos not paying attention.
A point source emits sound waves with a power output of 135 watts. What is the sound level (in dB) at a distance of 10 m
Answer:
The sound level of the point source at a distance of 10 meters is approximately 110.294 decibels.
Explanation:
First, we calculate the intensity ([tex]I[/tex]), in watts per square meter, by the Inverse-Square Law:
[tex]I= \frac{\dot W}{4\pi\cdot r^{2}}[/tex] (1)
Where:
[tex]\dot W[/tex] - Power, in watts.
[tex]r[/tex] - Radius, in meters.
And the sound intenity level ([tex]L[/tex]), in decibels, is expressed by:
[tex]L = 10\cdot \log_{10} \frac{I}{I_{o}}[/tex] (2)
Where [tex]I_{o}[/tex] is the reference sound intensity, in watts per square meter.
If we know that [tex]\dot W = 135\,W[/tex], [tex]r = 10\,m[/tex] and [tex]I_{o} = 10^{-12}\,\frac{W}{m^{2}}[/tex], then we find that sound level at a distance of 10 meters is:
[tex]I= \frac{\dot W}{4\pi\cdot r^{2}}[/tex]
[tex]I = 0.107\,\frac{W}{m^{2}}[/tex]
[tex]L = 10\cdot \log_{10} \frac{I}{I_{o}}[/tex]
[tex]L \approx 110.294\,dB[/tex]
The sound level of the point source at a distance of 10 meters is approximately 110.294 decibels.
Dones
Which statement best explains the similarity in the arrangement of the bones in these two structures?
O The bones of all animals are similarly arranged
O The bones of animals that take in oxygen are similarly arranged.
O Humans and whales use these structures to perform the same functions.
Humans and whales inherited these structures from a common ancestor.
Calculate the Kinetic energy of: 1. a rabbit weighing 10
kg moving at a speed of 5 m/s.
Answer:
125
Explanation:
use the formula e=1/2mv² and use m=10 and v=5
this produces the equation e=1/2x10x25=125
dont forget the units (J) ;)
Answer:
125J
Explanation:
K.e=1/2mv^2
=1/2(10)(5)^2
=125J
An object has an angular velocity of 1.0 rad and an angular acceleration of 0.5 rad/s. Is the speed of its rotation increasing or decreasing?
Answer:
increasing
Explanation:
Given that,
Initial angular speed =1 rad/s
Angular acceleration = 0.5 rad/s²
We know that the angular acceleration is given by :
[tex]\alpha =\dfrac{\omega_f-\omega_i}{t}[/tex]
Where
[tex]\omega_f[/tex]city and t is time is the final angualr velo
As the angular acceleration of the object is positive. It means that the final speed of the object is more than that initial. As a result, the speed of its rotation is increasing.
a transfer of energy without a transfer of mass describes what?
Explanation:
Wave motion
ex...longitudinal wave.
A net force of 40 N south acts as an object with a mass of 20kg. What is the object's acceleration
Answer:
a = 2 m/s²
Explanation:
Given: 20 g, 40N
To find: Acceleration (a)
Solution: To find the acceleration (A), divide the force by the weight
A = F ÷ m
= 40 ÷ 20
= 2 m/s²
Newtons are derived units, equal to 1 kg-m/s². In other words, a single Newton is equal to the force needed to accelerate one kilogram one meter per second squared.
How does the mass of a satellite, moon or asteroid affect its orbital speed?
clarify this statement acceleration due to gravity of the Earth is 9.8m/s square
Answer:
it means that velocity of a body rises by 9.8m/s each second if the air resistance is nrelated
mark me
PLEASE HELP !!!
Which statement correctly describes protons?
A.
They have no charge and are present in the nucleus of an atom.
B.
They have a negative charge and travel around the nucleus of an atom.
C.
They have a positive charge and travel around the nucleus of an atom.
D.
They have a positive charge and are present in the nucleus of an atom along with the neutrons.
Answer:
A
Explanation:
The answer is A because proton number is the same as atomic number
Minh spent the weekend on his Wii and now has carpal tunnel syndrome. His 120 V outlet has an electrical current of 8A. What is the resistance in the Wii?
The resistance is 15 ohms.
Also, it's dissipating 960 watts whenever it's turned on. So it's almost as hot as a toaster, and Minh no longer has hands.
An RC circuit consists of a resistor with resistance 1.0 kΩ, a 120-V battery, and two capacitors, C1 and C2, with capacitances of 20.0 μF and 60.0 μF, respectively. Initially, the capacitors are uncharged; and the switch is closed at t = 0 s. How much charge will be stored in eah capacitor after a long time has elapsed (capacitor one 2.4 x 10^-3 C) (capacitor 2 7.2 x 10^-3 C) and what will the total charge on both capacitors two time constants after the switch is closed? (8.3 x 10^-3)
Answer:
[tex]Q_t= 8.3 * 10^3 C[/tex]
Explanation:
From the question we are told that:
Resistor [tex]R=1000ohms[/tex]
Voltage [tex]v=120_V[/tex]
Capacitance of c_1 [tex]c_1=20 \mu F[/tex]
Capacitance of c_2 [tex]c_2=60 \mu F[/tex]
Time [tex]t=0[/tex]
Generally the equation for charges is mathematically given by
[tex]For C_1\\Charge\ on\ C_1 = CV = 20*120 = 2400 μC = 2.4 x 10^-3 C\\Charge\ on\ C_1 = 2400 μC = 2.4 x 10^-3 C\\Charge\ on\ C_1 = 2.4 x 10^-3 C\\[/tex]
[tex]ForC_2\\Charge on C_2 = 60*120 =7200 μC = 7.2 x 10^-3\\Charge on C_2 = 7.2 x 10^-3[/tex]
Generally the equation for voltage across capacitors is mathematically given by
[tex]V_c(t)=V(1-e^{-t/RC})[/tex]
[tex]C=C_1+C_2=80 \mu f\\t=2RC=>160000s[/tex]
[tex]V_c(t)=120(1-e^{-(160000)/1000*(80)})[/tex]
[tex]V_c(t)=103.7598[/tex]
Generally the equation for charges is mathematically given by
[tex]Q1(t) = C1Vc(t)\\Q1(t) = 20*103.7598\\Q1(t) = 2075.196\\\\Q2(t) = 60*103.7598\\Q2(t) = 6225.6\\[/tex]
Generally the equation for total charges [tex]Q_t[/tex] is mathematically given by
[tex]Q_t=Q1(t)+Q2(t)[/tex]
[tex]Q_t= 8.3 * 10^3 C[/tex]