What is the unit of measurement of mass and weight? ​

Answer:

a) The angular acceleration is 1.875 radians per square second.

b) The time taken by the disk to reach the final angular speed is 8 seconds.

Explanation:

a) Let suppose that the disk accelerates uniformly, given that initial and final angular speed ([tex]\omega_{o}[/tex], [tex]\omega_{f}[/tex]), in radians per second, and change in angular position ([tex]\Delta \theta[/tex]), in radians, are known. The angular acceleration ([tex]\alpha[/tex]), in radians per square second, are found by using this expression:

[tex]\alpha = \frac{\omega_{f}^{2}-\omega_{o}^{2}}{2\cdot \Delta \theta}[/tex] (1)

If we know that [tex]\omega_{o} = 0\,\frac{rad}{s}[/tex], [tex]\omega_{f} = 15\,\frac{rad}{s}[/tex] and [tex]\Delta \theta = 60\,rad[/tex], then the angular acceleration of the disk is:

[tex]\alpha = \frac{\omega_{f}^{2}-\omega_{o}^{2}}{2\cdot \Delta \theta}[/tex]

[tex]\alpha = 1.875\,\frac{rad}{s^{2}}[/tex]

The angular acceleration is 1.875 radians per square second.

b) The time taken by the disk to reach the final angular velocity is determined by the following kinematic formula:

[tex]t = \frac{\omega_{f}-\omega_{o}}{\alpha}[/tex] (2)

Where [tex]t[/tex] is the time, in seconds.

If we know that [tex]\omega_{o} = 0\,\frac{rad}{s}[/tex], [tex]\omega_{f} = 15\,\frac{rad}{s}[/tex] and [tex]\alpha = 1.875\,\frac{rad}{s^{2}}[/tex], then the time taken by the disk is:

[tex]t = \frac{\omega_{f}-\omega_{o}}{\alpha}[/tex]

[tex]t = 8\,s[/tex]

The time taken by the disk to reach the final angular speed is 8 seconds.

Answer:

[tex]\theta=76\ rad[/tex]

Explanation:

Hoven that,

Initial angular velocity of the wheel = 24 rad/s

Final angular velocity = 14 m/s

Time, t = 4 s

We need to find how many radians does the wheel turn through during the 4 s interval. Let the displacement is [tex]\theta[/tex]. Using second equation of rotational kinematics to find it such that,

[tex]\theta=\omega_i t+\dfrac{1}{2}\alpha t^2[/tex]

Where

[tex]\alpha[/tex] is angular acceleration

[tex]\alpha =\dfrac{\omega_f-\omega_i}{t}\\\\\alpha =\dfrac{14-24}{4}\\\\\alpha =-2.5\ rad/s^2[/tex]

So,

[tex]\theta=24\times 4+\dfrac{1}{2}\times (-2.5)\times 4^2\\\\\theta=76\ rad[/tex]

So, it will turn 76 radian during the 4 s interval.

Answer: B

Explanation:

Answers A and C are examples of physical weathering while B is chemical weathering when water and lime mix it creates a reaction

Answer:

b I'm pretty sure sorry if I'm wrong

Answer:

I think the answer is B

Explanation:

The warm air turns cold and then it goes back to clouds

Answer:

230.4 N

Explanation:

From the question given above, the following data were obtained:

Charge (q) of each protons = 1.6×10¯¹⁹ C

Distance apart (r) = 1×10¯¹⁵ m

Force (F) =?

NOTE: Electric constant (K) = 9×10⁹ Nm²/C²

The force exerted can be obtained as follow:

F = Kq₁q₂ / r²

F = 9×10⁹ × (1.6×10¯¹⁹)² / (1×10¯¹⁵)²

F = 9×10⁹ × 2.56×10¯³⁸ / 1×10¯³⁰

F = 2.304×10¯²⁸ / 1×10¯³⁰

F = 230.4 N

Therefore, the force exerted is 230.4 N

Answer:

230.4

Explanation:

acellus

Answer:

Option D. ²³⁹₉₃Np

Explanation:

From the question given above, the following data were:

²³⁹₉₂U —> ⁰₋₁e + __

Let ⁿₘX represent the unknown. Thus, the equation above becomes

²³⁹₉₂U —> ⁰₋₁e + ⁿₘX

Next, we shall determine n, m and X. This can be obtained as follow:

239 = 0 + n

239 = n

n = 239

92 = –1 + m

Collect like terms

92 + 1 = m

93 = m

m = 93

ⁿₘX => ²³⁹₉₃X => ²³⁹₉₃Np

Thus, the balanced equation becomes:

²³⁹₉₂U —> ⁰₋₁e + ⁿₘX

²³⁹₉₂U —> ⁰₋₁e + ²³⁹₉₃Np

Option D gives the correct answer to the question.

Answer:

D

Explanation:

239 93 Np

The correct statement about the wind is:

Wind is the movement of air currents in relation to the Earth's surface, which is caused by pressure differences and air movement.

Therefore, we can conclude that the wind is the current of air that occurs in the atmosphere due to natural causes, from high pressure areas to low pressure areas.

Learn more about Characteristics of the wind here: https://brainly.com/question/11463167

Answer:

B i think

Explanation:

...

Answer:

3.17333333333? I hope I get it right

Explanation:

..................hello

Answer:

vcyl / vsph = 1.05

Explanation:

       [tex]K_{trans} = \frac{1}{2}* M* v_{cm} ^{2} (1)[/tex]

       [tex]K_{rot} = \frac{1}{2}* I* \omega ^{2} (2)[/tex]

       [tex]v = \omega * R (3)[/tex]

       [tex]K_{rot} = \frac{1}{2}* \frac{1}{2} M*R^{2} * \frac{v_{cmc} ^{2}}{R^{2}} = \frac{1}{4}* M* v_{cmc}^{2} (5)[/tex]

       [tex]K_{cyl} = \frac{1}{2}* M* v_{cmc} ^{2} +\frac{1}{4}* M* v_{cmc}^{2} = \frac{3}{4}* M* v_{cmc} ^{2} (6)[/tex]

        [tex]I_{sph} = \frac{2}{3} * M* R^{2} (7)[/tex]  

       [tex]K_{rot} = \frac{1}{2}* \frac{2}{3} M*R^{2} * \frac{v_{cms} ^{2}}{R^{2}} = \frac{1}{3}* M* v_{cms}^{2} (8)[/tex]

      [tex]K_{sph} = \frac{1}{2}* M* v_{cms} ^{2} +\frac{1}{3}* M* v_{cms}^{2} = \frac{5}{6}* M* v_{cms} ^{2} (9)[/tex]

       [tex]\frac{v_{cmc}}{v_{cms}} =\sqrt{\frac{10}{9} } = 1.05 (10)[/tex]

Answer:

The energy goes from the ground state to the excited states above it.

Answer:

E = 0.1472  J

Explanation:

Given that,

The number of turns in the solenoid, N = 2100

Area of the solenoid, A = 10 cm² = 0.001 m²

The length of the solenoid, l = 30 cm = 0.3 m

Current in the solenoid, I = 4 A

We need to find the magnetic energy stored in the solenoid. The expression for the stored energy is :

[tex]E=\dfrac{1}{2}LI^2[/tex]

Where

L is self inductance of the solenoid,

[tex]L=\dfrac{\mu_oN^2A}{l}\\\\L=\dfrac{4\pi \times 10^{-7}\times 2100^2\times 0.001}{0.3}\\\\L=0.0184\ H[/tex]

So,

[tex]E=\dfrac{1}{2}\times 0.0184\times 4^2\\\\E=0.1472\ J[/tex]

So, 0.1472  J of energy is stored in the solenoid.

Answer:

When the glass rod is rubbed with silk, the silk strips electrons from the rod, leaving it a positive charge. When the hard rubber rod is rubbed with wool, it gains electrons from the wool, gaining a negative charge.

Explanation:

Answer:

you may get bullied or teased for being a differrent race, ethnic.

Answer:

Workload

Explanation:

You may feel stressed about a heavier workload or more too do. You will also be paid as an employee unlike, a student.

Answer:

6 - iron

7 - by stringing many magnets together

Explanation:

6 - substances such as iron, cobalt, and nickel, most of the electrons spin in the same direction. This makes the atoms in these substances strongly magnetic—but they are not yet magnets. ... The piece of iron has become a magnet. Some substances can be magnetized by an electric current.

7 - it is that only

Answer:

K E=( mv²)/2

=(60×3.5²)/2

=367.5J

Answer:

13.6 N

Explanation:

Since one side of the wedge is vertical and the wedge makes and angle of 33 with the horizontal, the angle between the weight of the copper block on the incline and the incline is thus 90 - 33 = 57.

Let M be the mass of the block that hangs, m be the mass of the block on the incline and T be the tension in the weightless unstretchable cord.

We assume the motion is downwards in the direction of the hanging block, M.

We now write equations of motion for each block.

So

Mg - T = Ma    (1) and T - mgcos57 - F = ma where F is the frictional force on the block on the incline and a is their acceleration.

Now, since both blocks do not move, a = 0.

So, Mg - T = M(0) = 0     and T - mgcos57 - F = m(0) = 0

Mg - T = 0    (3) and T - mgcos57 - F = 0 (4)

From (3), T = Mg

Substituting T into (4), we have

T - mgcos57 - F = 0

Mg - mgcos57 - F = 0

So, Mg - mgcos57 = F  

F = Mg - mgcos57

F = (M - mcos57)g

Since g = acceleration due to gravity = 9.8 m/s², and M = 2.94 kg and m = 2.85 kg.

We find F, thus

F = (2.94 kg - 2.85 kgcos57)9.8 m/s²

F = (2.94 kg - 2.85 kg × 0.5446)9.8 m/s²

F = (2.94 kg - 1.552 kg)9.8 m/s²

F = (1.388 kg)9.8 m/s²

F = 13.6024 kgm/s²

F ≅ 13.6 N

Answer:

t = 0.437 s

Explanation:

The speed of sound is a constant that is worth v = 343 m / s

           v = d / t

            t = d / v

the time it takes for the sound to reach Clark at d = 150 m is

           t = 150/343

           t = 0.437 s

This same sound takes much longer to reach you

          t₂ = 127 10³/343

          t₂ = 370 s

Answer:

B

Explanation:

Answer:

Some plains form as ice and water erodes, or wears away, the dirt and rock on higher land. Water and ice carry the bits of dirt, rock, and other material, called sediment, down hillsides to be deposited elsewhere. As layer upon layer of this sediment is laid down, plains form. Volcanic activity can also form plains.

Answer: The electric field is produced by stationary charges, and the magnetic field by moving charges (currents); these two are often described as the sources of the field. ... The force created by the electric field is much stronger than the force created by the magnetic field.

Explanation: An electric field is an invisible force field created by the attraction and repulsion of electrical charges (the cause of electric flow), and is measured in Volts per meter (V/m).

Answer:

The electric field is produced by stationary charges, and the magnetic field by moving charges (currents); these two are often described as the sources of the field.  The force created by the electric field is much stronger than the force created by the magnetic field.

Explanation:

Ggl

Answer:

Explanation:

V = J/C

V = 20/1

= 20 v

Option A is the correct answer

Answer:

a). Single replacement.

Explanation:

Because one element replaces another element in a compound

Answer:

The predicted height is 2.809 meters, writing this in centimeters we get (1m = 100cm):

h = 2.809 m = (2.809)*(100cm) = 280.9 cm

And the total energy is:

E = 6.696 J

Explanation:

First let's see the problem.

We have an object of mass m = 274g which is thrown upwards with an initial velocity v0 = 6.991 m/s, in a place with a gravitational acceleration of g = 8.7 m/s^2

When the object is on the air, the only force acting on it will be the gravitational force, then the acceleration of the object will be equal to the gravitational acceleration, then we can write:

a(t) = -8.7 m/s^2

Where the negative sign is because this acceleration points down.

Now to get the velocity of the object we can integrate over time to get:

v(t) = (-8.7 m/s^2)*t + v0

Where v0 is a constant of integration, which is the initial velocity, then we can write this as:

v(t) = (-8.7 m/s^2)*t + 6.991 m/s

Now we can integrate again over the time to get the position equation.

p(t) = (1/2)*(-8.7 m/s^2)*t^2 + (6.991 m/s)*t + p0

Where p0 is the initial position, because the ball is being thrown from the ground, the initial position is 0.

Then the position equation is:

p(t) = (1/2)*(-8.7 m/s^2)*t^2 + (6.991 m/s)*t

Ok, now we know all the movement equations for the object.

The first thing we want to know is the maximum height of the object.

We know that the object reaches its maximum height when the velocity is zero (this is, the velocity stops being positive, meaning that the object stops going up, then in that time we have the maximum height)

We need to solve:

v(t) = 0m/s = (-8.7 m/s^2)*t + 6.991 m/s

(8.7 m/s^2)*t =  6.991 m/s

t =  6.991 m/s/( (8.7 m/s^2)  = 0.804 seconds

The maximum height of the object is given by:

p(0.804s) = (1/2)*(-8.7 m/s^2)*(0.804)^2 + (6.991 m/s)*(0.804) = 2.809 m

The maximum height of the object is 2.809 meters.

Now let's find the maximum energy.

Remember that the energy of an object can be written as the sum of the potential energy U and the kinetic energy K.

E = K + U

Such that for an object of mass m and velocity v, the kinetic energy is:

K = (1/2)*m*v^2

And for an object of mass m, at a height h from the ground and with gravitational acceleration g, the potential energy is:

U = m*g*h

Now, when the object is at its maximum height, the velocity is zero.

Then K = 0

And for conservation of energy, the total energy of the object becomes potential energy.

E = 0 + U

E = U

So if we find the potential energy at the maximum height of the object's path, we can find the total energy of the object.

We know that:

mass = m = 274g = 0.274 kg  (here i used that 1kg = 1000g)

height = h = 2.809 meters.

gravitational acceleration = g = 8.7 m/s^2

Then the potential energy at this point is:

U =  0.274 kg*(2.809 meters)*(8.7 m/s^2) = 6.696 J

This means that the total energy of the object is:

E = 6.696 J

Answer:

500km per hour

Explanation:

if in 2 hours the airplane flies 1000 km then 1000 divided by 2 is 500km per hour.

Answer:

a.

Explanation:

there would be a new planet is our solar system which could cause different gravitation pull on all the planets also there could be possible be new life form or other valuable metals that haven't been discovered on this planet. hope this helps somewhat

Answer:

Explanation:

angle of incidence.

Answer:

3.67 N

Explanation:

From the question given above, the following data were obtained:

Charge of 1st object (q₁) = +15.5 μC

Charge of 2nd object (q₂) = –7.25 μC

Distance apart (r) = 0.525 m

Force (F) =?

Next, we shall convert micro coulomb (μC) to coulomb (C). This can be obtained as follow:

For the 1st object

1 μC = 1×10¯⁶ C

Therefore,

15.5 μC = 15.5 × 1×10¯⁶

15.5 μC = 15.5×10¯⁶ C

For the 2nd object:

1 μC = 1×10¯⁶ C

Therefore,

–7.25 μC = –7.25 × 1×10¯⁶

–7.25 μC = –7.25×10¯⁶ C

Finally, we shall determine the force. This can be obtained as follow:

Charge of 1st object (q₁) = +15.5×10¯⁶ C

Charge of 2nd object (q₂) = –7.25×10¯⁶ C

Distance apart (r) = 0.525 m

Electrical constant (K) = 9×10⁹ Nm²/C²

Force (F) =?

F = Kq₁q₂ / r²

F = 9×10⁹ × 15.5×10¯⁶ × 7.25×10¯⁶ / 0.525²

F = 3.67 N

Therefore, the force on the object is 3.67 N