All of these increase the pressure of a gas:
a. decreasing the volume
b. increasing temperature
c. increasing the number of molecules
None of these decreases the pressure of a gas:
a. decreasing the volume
b. increasing the temperature
c. increasing the number of gas molecules
What is the pressure of a gas?
Therefore, a gas's pressure can be used to calculate the average linear momentum of its moving molecules. The pressure acts normal (perpendicular) to the wall, and the viscosity of the gas affects the tangential (shear) component of the force.
They will now have an inverse relationship if PV remains constant. The pressure will rise as there are more gas atoms in the container. The pressure in a container will rise as the volume rises.
The relationship between the gas pressure and the number of molecules in the gas is direct. Inversely correlated to the gas's pressure is the gas's volume. The relationship between the gas's pressure and temperature is straightforward.
To learn more about pressure :
https://brainly.com/question/24719118
#SPJ4
A laptop battery has an emf of 11.4 V. The laptop uses 0.80 A while running. Part A How much charge moves through the battery each second? Express your answer with the appropriate units. By how much does the electric potential energy of this charge increase as it moves through the battery? Express your answer with the appropriate units.
(a) The charge moving through the battery each second is 0.80 Coulombs. (b) The electric potential energy of the charge increases by 9.12 Joules as it moves through the battery.
Part A:
The charge moving through the battery each second can be calculated using the formula:
Q = I * t
Where Q is the charge, I is the current, and t is the time.
Given that the laptop uses 0.80 A while running, the charge moving through the battery each second can be calculated as:
Q = (0.80 A) * (1 s)
Calculating this expression gives us:
Q = 0.80 C
Therefore, the charge moving through the battery each second is 0.80 Coulombs.
Part B:
The change in electric potential energy as the charge moves through the battery can be calculated using the formula:
ΔPE = Q * ΔV
Where ΔPE is the change in electric potential energy, Q is the charge, and ΔV is the change in voltage.
In this case, since the battery has an emf (electromotive force) of 11.4 V, the change in voltage is equal to the emf. Therefore, we have:
ΔPE = Q * emf
Substituting the known values, we have:
ΔPE = (0.80 C) * (11.4 V)
Calculating this expression gives us:
ΔPE = 9.12 J
Therefore, the electric potential energy of the charge increases by 9.12 Joules as it moves through the battery.
(a) The charge moving through the battery each second is 0.80 Coulombs.
(b) The electric potential energy of the charge increases by 9.12 Joules as it moves through the battery.
To know more about potential energy ,visit:
https://brainly.com/question/21175118
#SPJ11
A cyclist travels 21 km in 90 minutes. Calculate, in m s–1 , the speed of the cyclist.
Answer:
35/9 m/s
Explanation:
21 km = 21000 m
90 min = 90*60 s = 5400 s
21000/5400 = 35/9 m/s
A shopper standing 3.00 m from a convex security mirror sees his image with a magnification of 0.250. How far is his image from the mirror's surface and is it real or virtual?
o 8.33 cm, virtual o 8.33 cm, real o 75.0 cm, virtual o 75.0 cm. real
The image of the shopper is 75.0 cm from the mirror's surface, and it is virtual.
The magnification (m) of an image formed by a convex mirror is given by the formula:
m = -d_i / d_o,
where d_i is the distance of the image from the mirror's surface and d_o is the distance of the object from the mirror's surface. In this case, the magnification is given as 0.250.
Given that the shopper is standing 3.00 m from the convex mirror (d_o = 3.00 m) and the magnification is 0.250, we can rearrange the formula to solve for d_i:
d_i = -m * d_o.
Substituting the values into the formula:
d_i = -0.250 * 3.00,
= -0.75 m.
The negative sign indicates that the image is virtual, meaning it cannot be projected onto a screen. Taking the absolute value, the image is 0.75 m from the mirror's surface.
Converting 0.75 m to centimeters, we get 75.0 cm.
The image of the shopper is located 75.0 cm from the convex mirror's surface, and it is a virtual image. This calculation utilizes the magnification formula for a convex mirror to determine the distance of the image based on the given magnification and object distance.
To know more about mirror, visit
https://brainly.com/question/1126858
#SPJ11
the force on a loop of wire in a magnetic field shown in the figure can be used to measure the field strength. the field is uniform, and the plane of the loop is perpendicular to the field.
The force experienced by the loop can be utilized to measure the field strength of the uniform magnetic field.
This force is known as the magnetic force or the Lorentz force.
The magnetic force (F) on a current-carrying loop of wire in a magnetic field is given by the equation:
[tex]F = I * B * A * sin(\theta)[/tex]
Where:
F is the magnetic force,
I is the current flowing through the loop,
B is the magnetic field strength,
A is the area of the loop, and
θ is the angle between the magnetic field and the normal to the loop.
In this case, the loop is placed perpendicular to the magnetic field, so θ = 90 degrees, and sin(θ) = 1. Therefore, the equation simplifies to:
F = I * B * A
By adjusting the current and measuring the resulting force, we can calculate the magnetic field strength (B) using the equation:
B = F / (I * A)
To know more about Lorentz force, here
brainly.com/question/28211140
#SPJ4
--The complete question is, How the force on a loop of wire in a magnetic field can be used to measure the field strength? the field is uniform, and the plane of the loop is perpendicular to the field.--
a car moving south speeds up from 10 m/s to 40 m/s in 15 seconds. what is the car’s acceleration?2 m/s215 m/s230 m/s250 m/s2
The acceleration of this car include the following: A. 2 m/s².
How to calculate the acceleration of this car?In Science, the acceleration of a car can be calculated by using this mathematical expression:
a = (V - U)/t
Where:
a represents the acceleration measured in meters per seconds square (m/s²).V represents the final velocity measured in meters per seconds (m/s).U represents the initial velocity measured in meters per seconds (m/s).t represents the time measured in seconds.By substituting the given parameters into the acceleration formula, we have;
Acceleration, a = (40 - 10)/15
Acceleration, a = 30/15
Acceleration, a = 2 m/s².
Read more on acceleration here: brainly.com/question/24728358
#SPJ4
In your own words, tell me how an element, molecule, and compound are used to make different substances. All three must be mentioned in order to receive full credit.
Answer:
When atoms from different elements are joined together in groups, they form molecules. The atoms in molecules bind together chemically, which means that the atoms cannot be separated again by physical means, such as filtration. The molecule has different properties from the elements from which is was made.
Explanation:
Investigators are exploring ways to treat milk for longer shelf life by using pulsed electric fields to destroy bacterial contamination. One system uses 8. 0-cm-diameter circular plates separated by 0. 95 cm. The space between the plates is filled with milk, which has the same dielectric constant as that of water. The plates are briefly charged to 30,000 V. What is the capacitance of the system? How much charge is on each plate when they are fully charged?
The given system consists of two 8.0-cm-diameter circular plates separated by 0.95 cm, which are filled with milk. The capacitance of the system can be calculated as follows:Explanation:Capacitance is defined as the charge stored per unit potential difference,using the formula C = Q/V, where C is capacitance, Q is charge, and V is potential difference.
In this case, the capacitance of the system can be calculated using the formula for the capacitance of parallel plate capacitors:
[tex]C = εA/d[/tex],
where C is capacitance, ε is the permittivity of free space, A is the area of each plate, and d is the distance between the plates.The area of each plate can be calculated using the formula for the area of a circle:
[tex]A = πr²[/tex],
where r is the radius of the circle.Substituting the given values into the formula, we get:
[tex]C = εA/dC = (8.85 × 10⁻¹² F/m) × [(π × (8.0/2 × 10⁻² m)²)/0.95 × 10⁻² m]C = 6.21 × 10⁻¹⁰ F[/tex]
Thus, the capacitance of the system is [tex]6.21 × 10⁻¹⁰ F[/tex].
The amount of charge on each plate when they are fully charged can be calculated using the formula Q = CV, where Q is charge, C is capacitance, and V is potential difference.Substituting the given values into the formula, we get:
[tex]Q = CVQ = (6.21 × 10⁻¹⁰ F) × (30,000 V)Q = 1.86 × 10⁻⁵ C[/tex]
Thus, the amount of charge on each plate when they are fully charged is [tex]1.86 × 10⁻⁵ C[/tex].
To know more about capacitance visit :
https://brainly.com/question/31871398
#SPJ11
In the space provided, write either TRUE or FALSE.
(a) Intheequationf(x)=mx+b,thevariablebrepresentstheslope.
(b) The graph of a linear function is always a straight line.
√
(c) The domain of the function y = 3 − x is the set of all real numbers less
than or equal to 3.
(d) The operation of function composition is commutative. That is, for all
functionsf andg,itistruethatf◦g=g◦f.
A. FALSE. In the equation, 'b' represents the y-intercept not slope.
B. TRUE. The graph of a linear function is always a straight line.
C. FALSE. The domain of the function y = √3 − x is the set of all real numbers greater than or equal to 3.
D. FALSE. The operation of function composition is not commutative
What should you know about function composition?
The operation of function composition is not generally commutative. For functions f and g, it's not necessarily true that f(g(x)) = g(f(x)). The order in which functions are composed can affect the result.
The domain of the function y = √(3 - x) is the set of all real numbers less than or equal to 3.
This is because for the expression under the square root to be non-negative (and thus yield a real number as output), x must be less than or equal to 3.
However, if the expression was y = √3 - x, it would have a different meaning, and the domain would be all real numbers, because √3 is a constant, and subtracting any real number x from a constant yields a real number
Find more exercises on function composition;
https://brainly.com/question/30143914
#SPJ1
An f/3.05 CCD camera has a 109 mm focal length lens and can focus on objects from infinity to as near as 32.5 cm from the lens. Note: "773.05* means an number of 3.05. HINT (a) Determine the camera's aperture diameter in mm. mm Determine the minimum and maximum distances in cm from the CCD sensor over which the lens must be able to travel during focusing (b) minimum cm (c) maximum cm
a)The camera's aperture diameter is approximately 35.737 mm, b)The minimum distance from the CCD sensor during focusing is approximately infinity, c) The maximum distance from the CCD sensor during focusing is approximately infinity.
To determine the camera's aperture diameter in mm, we can use the formula for calculating the aperture diameter based on the f-number (f/3.05):
Aperture diameter = Focal length / f-number
Substituting the values into the formula, we get:
Aperture diameter = 109 mm / 3.05
Aperture diameter = 35.737 mm (rounded to three decimal places)
Now, let's calculate the minimum and maximum distances from the CCD sensor over which the lens must be able to travel during focusing.
Given:
Minimum focusing distance = 32.5 cm
Infinity focusing distance (approximated as very large) = infinity
(b) Minimum distance from the CCD sensor during focusing:
The minimum distance from the CCD sensor during focusing is the difference between the infinity focusing distance and the minimum focusing distance. Since infinity is approximated as very large, we can consider the minimum distance as:
Minimum distance = Infinity - Minimum focusing distance
Minimum distance = infinity
(c) Maximum distance from the CCD sensor during focusing:
The maximum distance from the CCD sensor during focusing is the difference between the infinity focusing distance and the minimum focusing distance. Since infinity is approximated as very large, we can consider the maximum distance as:
Maximum distance = Infinity - Minimum focusing distance
Maximum distance = infinity
To know more about aperture diameter
https://brainly.com/question/10095671
#SPJ4
Calculate the magnitude of the electric field at one corner of a square 2.12 m on a side if the other three corners are occupied by 4.75×10−6 C charges. Express your answer to three significant figures and include the appropriate units.
What is the direction of the electric field at the corner?
What is the direction of the electric field at the corner?
along the side of the square between the corner and one of the charges toward the charge
along the side of the square between the corner and one of the charges outward of the charge
along the line between the corner and the center of the square toward the center
along the line between the corner and the center of the square outward of the center
The direction of the electric field at the corner is along the line between the corner and the center of the square, outward of the center.
The formula to calculate the electric field at a point due to a point charge is given by: Electric field = (k * |q|) / r^2
Given that the charge at each corner is 4.75×10−6 C and the side length of the square is 2.12 m, we can calculate the electric field due to each charge at the corner. Since the charges are at the corners, the distance (r) between each charge and the corner is equal to the side length of the square (2.12 m). Calculating the electric field due to each charge and summing them up, we have:Electric field = (k * |q|) / r^2 + (k * |q|) / r^2 + (k * |q|) / r^2
Electric field = (3 * k * |q|) / r^2
Substituting the values, we get:
Electric field = (3 * 9 x 10^9 N m^2/C^2 * 4.75×10−6 C) / (2.12 m)^2
Electric field ≈ 2.526 x 10^6 N/C
Therefore, the magnitude of the electric field at one corner of the square is approximately 2.526 x 10^6 N/C. Now, let's determine the direction of the electric field at the corner. Since the other charges are positive, the electric field vectors due to these charges will point away from them. Considering the symmetry of the square, the electric field vectors at the corner will be directed along the line between the corner and the center of the square, outward of the center.Therefore, the direction of the electric field at the corner is along the line between the corner and the center of the square, outward of the center.
To learn more about electric field:
https://brainly.com/question/11482745
#SPJ11
A force of 355 N is applied to an object that accelerates at a rate of 7.8 m/sec2 . What is the mass of the object ?
Answer:
A force of 355 N is applied to an object that accelerates at a rate of 7.8 m/sec2 . What is the mass of the object ?
Explanation:
A force of 2 lb stretches a spring 1 ft. An 8-lb weight is attached to the end of the spring and released 4in. above the equilibrium position from rest. If the medium offers a resistance to the motion of the weight numerically equal to 3/2 times the instantaneous velocity, find the equation of motion. Determine if the system is underdamped, overdamped, or critically damped.
The solution to the differential equation is then:
x(t) = 0.25e⁽⁻⁶·⁰²⁵t⁾ cos(2.181t)
And the system is underdamped because the roots of the characteristic equation have a non-zero imaginary part.
The force required to stretch a spring is directly proportional to the amount the spring is stretched. This relationship is known as Hooke’s Law. It can be expressed mathematically as:
F = -kx
Where F is the force applied to the spring, x is the displacement of the spring from its equilibrium position, and k is the spring constant.
For a mass-spring system under the influence of a damping force, the differential equation governing the system is:
m(d2x/dt2) + c(dx/dt) + kx = 0
where m is the mass of the object attached to the spring, c is the damping coefficient, and k is the spring constant.
The given force of 2 lb stretches the spring by 1 ft, so the spring constant is given by k = F/x = 2/1 = 2 lb/ft.
The 8-lb weight is released 4 in. above the equilibrium position, which is 0.25 ft. The initial displacement is therefore x(0) = 0.25 ft, and the initial velocity is v(0) = 0. The damping force is given by f_d = -3/2v. Using the values given, the differential equation for the system is:
m(d2x/dt2) + c(dx/dt) + kx = 0 (1)
The values of m, k, and c are given by
m = 8/g = 8/32.2 = 0.248 kg
k = 2/lb/ft * 0.4536 kg/lb * 0.3048 m/ft = 0.294 kg/sm = 0.248 kgc = 3/2
The equation of motion is then:
d2x/dt2 + 12.05dx/dt + 1.186x = 0 (2)
where we have substituted the values of m, c, and k into equation (1).
The characteristic equation is:
r2 + 12.05r + 1.186 = 0 (3)
Solving for the roots of the characteristic equation, we find:
r = (-12.05 ± √(12.052 - 4(1.186)))/2= -6.025 ± 2.181i
The roots are complex conjugates, so the solution to the differential equation can be written as:
x(t) = e⁽⁻⁶·⁰²⁵t⁾(C₁ cos(2.181t) + C₂ sin(2.181t)) (4)
The initial displacement and velocity are given by x(0) = 0.25 and v(0) = 0.
Substituting these values into equation (4) and taking the derivative, we get:
x(0) = C₁ = 0.25dx/dt|t=0 = -6.025
C₂ = 0
Solving for C₁ and C₂, we get:
C₁ = 0.25C2 = 0
The solution to the differential equation is then:
x(t) = 0.25e⁽⁻⁶·⁰²⁵t⁾ cos(2.181t) (5)
The system is underdamped because the roots of the characteristic equation have a non-zero imaginary part.
Learn more about the forces at:
https://brainly.com/question/17063178
#SPJ11
A. 180Ω resistor is in series with a 0.150H inductor and a 0.600μF capactor. Part A
Compute the impedance of the circuit at a frequency of f1=500 Hz and at a frequency of f2 =1000 Hz. Enter your answer in ohms separated by comma
Z1, Z2 = ____Ω. Part B In each case; compule the phase angle of the source voltage with respect to the current. Enter your answer in degrees separated by comma.
At a frequency of 500 Hz, the impedance of the circuit is approximately 180.026Ω, and the phase angle of the source voltage with respect to the current is approximately 0.637°.
A) To compute the impedance of the circuit, we use the formula:
Z = √(R² + (XL - XC)²)
Where Z is the impedance, R is the resistance, XL is the inductive reactance, and XC is the capacitive reactance.
Given:
Resistance (R) = 180Ω
Inductance (L) = 0.150H
Capacitance (C) = 0.600μF
= 0.600 × 10⁻⁶ F
At frequency f1 = 500 Hz:
XL = 2πf1L
XC = 1/(2πf1C)
Calculating XL and XC:
XL = 2π(500 Hz)(0.150 H)
= 471 Ω
XC = 1/(2π(500 Hz)(0.600 × 10⁻⁶ F))
≈ 5307 Ω
Using the formula for impedance:
Z1 = √(R² + (XL - XC)²)
= √(180² + (471 - 5307)²)
≈ 180.026 Ω
At frequency f2 = 1000 Hz:
XL = 2πf2L
XC = 1/(2πf2C)
Calculating XL and XC:
XL = 2π(1000 Hz)(0.150 H)
= 942 Ω
XC = 1/(2π(1000 Hz)(0.600 × 10⁻⁶ F))
≈ 2653 Ω
Using the formula for impedance:
Z2 = √(R² + (XL - XC)²)
= √(180² + (942 - 2653)²)
≈ 180.134 Ω
B) The phase angle (θ) of the source voltage with respect to the current can be calculated using the formula:
θ = atan((XL - XC)/R)
At frequency f1:
θ1 = atan((XL - XC)/R)
= atan((471 - 5307)/180)
≈ 0.637°
At frequency f2:
θ2 = atan((XL - XC)/R)
= atan((942 - 2653)/180)
≈ 0.318°
At a frequency of 500 Hz, the impedance of the circuit is approximately 180.026Ω, and the phase angle of the source voltage with respect to the current is approximately 0.637°. At a frequency of 1000 Hz, the impedance of the circuit is approximately 180.134Ω, and the phase angle is approximately 0.318°.
To know more about Impedance visit:
https://brainly.com/question/15110043
#SPJ11
Does Direction matter when you are measuring momentum
Answer:
Yes
Momentum is a vector quantity
Explanation:
A vector quantity is a quantity that has both magnitude and direction
So definitely direction matters
Answer:
no on edge 2021
Explanation:
Explain why locations near the North Pole experience weeks of sunlight in June with no sunsets.
Answer:
It happens because the Earth is tilted on its axis around 23 degrees therefore the sun normally never sets at north Pole in summers. The sun doesn't set at Arctic Circle on North pole from about April 19 to August 23 each year due to this phenomenon.
A 1.99 uF capacitor that is initially uncharged is connected in series with a 5.77 ki2 resistor and an emf source with 54.3 V and negligible internal resistance. The circuit is completed at t = 0. just after the circuit is completed, what is the rate at which electrical energy is being dissipated in the resistor?
The rate at which electrical energy is being dissipated in the resistor is 0.052 Watts.
What is resistor?
A resistor is an electronic component that is used to resist the flow of electric current in a circuit. It is specifically designed to have a specific resistance value, which determines how much it restricts the flow of current. Resistors are typically made of materials with high resistivity, such as carbon, metal alloys, or wire-wound materials.
Given:
Capacitance (C) = 1.99 μF = 1.99 * 10⁻⁶ F
Resistor (R) = 5.77 kΩ = 5.77 * 10³ Ω
EMF source voltage (V) = 54.3 V
First, we need to find the current flowing through the circuit. The current at any time t in an RC circuit can be given by:
I(t) = (V / R) * (1 - e⁻ᵗ⁄ ʳ×ᶜ)
At t = 0, just after the circuit is completed, we can simplify this to:
I(0) = (V / R)
Substituting the given values:
I(0) = (54.3 V) / (5.77 * 10³ Ω)
Calculating this, we find:
I(0) ≈ 0.00941 A
Now, to determine the rate at which electrical energy is being dissipated in the resistor, we use the formula for power:
P = I² * R
Substituting the value of current:
P = (0.00941 A)² * (5.77 * 10³ Ω)
Calculating this, we find:
P ≈ 0.052 W
Therefore, just after the circuit is completed at t = 0, the rate at which electrical energy is being dissipated in the resistor is approximately 0.052 Watts.
To learn more about resistor,
https://brainly.com/question/17671311
#SPJ4
The density of water is 1. 0 g/cm3. How many kilograms of water does a submerged 120-cm3 block displace? Recall that 1. 0 g/cm3 weights 9. 8 N on earth. What is the buoyant force on the block?
The density of water is 1.0 g/cm³. It's required to determine the mass of water displaced by a submerged 120-cm³ block and the buoyant force on the block.To find the mass of water displaced by a 120 cm³ block, we first need to know the mass of 1 cm³ of water, which is equal to its density, which is 1.0 g/cm³.
The volume of the block is 120 cm³, so we can calculate its mass by multiplying its volume by the density of water. Therefore, the mass of the block submerged in water is:120 cm³ × 1.0 g/cm³ = 120 gTo find the number of kilograms, we divide the value obtained by 1000. Therefore, 120 g = 0.12 kg.The buoyant force is equal to the weight of the water displaced by the block. The buoyant force equals the weight of water displaced by the object.
The weight of 1 cm³ of water is 9.8 N (newtons), which is equal to the weight of 1 g of water. We can use this to calculate the weight of water displaced by the block as follows:120 cm³ × 1.0 g/cm³ × 9.8 N/g = 1176 NTherefore, the buoyant force acting on the block is 1176 N (Newtons).
To know more about weight visit :
https://brainly.com/question/31659519
#SPJ11
Explain what does a calorimeter measure?
Measuring the heat of chemical reactions or physical changes.
Which answer below is not a statement of the second law of thermodynamics? a. Real processes proceed in a preferred direction. b. In theory, heat engines working in a cycle employ reversible processes. c. The entropy of the universe increases in all natural processes d. Energy does not flow spontancously by heat from a cold to a hot reservoir. You cannot construct a heat engine operating in a cycle that does nothing but take heat from a reservoir and perform an equal amount of work
The answer that is not a statement of the second law of thermodynamics is d. Energy does not flow spontaneously by heat from a cold to a hot reservoir.
Options a, b, and c all reflect different aspects of the second law of thermodynamics, such as the preferential direction of real processes, the increase of entropy in natural processes, and the limitation on constructing a heat engine that only performs work without rejecting any heat to a colder reservoir.
However, option d contradicts the second law by suggesting the spontaneous flow of heat from a cold to a hot reservoir, making it the answer that is not a statement of the second law of thermodynamics.
To know more about second law of thermodynamics, visit,
https://brainly.com/question/30600157
#SPJ4
Which type of bond is the attraction between two oppositely charged atoms or groups of atoms
Answer:
The type of bond is ionic bond also called electrovalent bond.
Explanation:
This ionic bond is formed through an electrostatic attraction between two oppositely charged atoms.
Hope this helps! :)
And also this question was already answered on Brainly if you wanna check it out.
The left end of a spring is attached to a wall. When Bob pulls on the right end with a 200 N force, he stretches the spring by 20 cm. The same spring is then used for a tug-of-war between Bob and Carlos. Each pulls on his end of the spring with a 200 N force. How far does the spring stretch
Answer:
40 cm
Explanation:
Since Bob pulls with a force of F = 200 N when the spring is attached to the wall and it extends a length x = 20 cm, from Hooke's law,
F = kx where k = spring constant
So, k = F/x = 200 N/20 cm = 10 N/cm
Now, sine both Bob and Carlos pull with a force of F = 200 N in opposite directions, the spring stretches about its center and has an extension, x' in each direction.
So, from F = kx
x = F/k = 200 N/10 N/cm = 20 cm
So, the spring stretches 20 cm in both directions.
So, the total extension is thus x' + x' = 2x' = 2(20 cm) = 40 cm
The spring will stretch 40 cm.When a force is act om the spring the spring will stretch or compress depeds on the application of force.
What is hooke's law?Hooke's law states that the force used to extend the spring is directly equal to the amount of stretch.
The force needed to extend the spring is proportional to its displacement. It is stated as
F=Kx
The given data in the problem is;
F is the force of pull to bob= 200 N
x is the length of extension= 20 cm.
F' is the force act on the another end= 200 N
According to Hooke's law,
[tex]\rm F = Kx \\\\ \rm K= \frac{F}{x} \\\\ \rm K= \frac{200}{20} \\\\ \rm K=10 \ N/cm[/tex]
The extension due to another end force is found by;
[tex]\rm x' = \frac{F}{K} \\\\ \rm x' = \frac{200}{10} \\\\ \rm x' = 20[/tex]
The total extension of the spring will be;
[tex]\rm x_t = x+x' \\\\ \rm x_t = 2(20) \\\\ \rm x_t =40\ cm[/tex]
Hence the spring will stretch 40 cm.
To learn more about the hooke's law refer to the link;
https://brainly.com/question/13348278
Two identical metal objects are insulated from their surroundings. Object A has a net charge of excess electrons. Object B is grounded. Which object is at a higher potential?
a) A
b) B
c) Both are at the same potential.
d) Cannot be determined without more information.
As a result, electrons are in high potential energy, and the object A has a negative potential.
Two identical metal objects are insulated from their surroundings. Object A has a net charge of excess electrons. Object B is grounded. The object at a higher potential is the object with excess electrons which is object A. The correct option is: A .In grounded object, the excess charges will neutralize and are canceled out by opposite charges from the earth, resulting in the object having no charge or neutral. Therefore, object B is neutral. On the other hand, Object A has an excess of electrons that create an electrostatic repulsive force, with each electron repelling each other.
Know more about potential here:
https://brainly.com/question/9349250
#SPJ11
A container of carbon dioxide has a volume of 315 cm³ at a temperature of 25°C if the pressure remains constant what is the volume of 54°C
Answer:
680.4
Explanation:
the formula is V1 over T1 is equals (=) to V2 over T2 .
and we have been given that
V1 represents 315
T1 represents 25°c
V2 is unknown and what we're finding
T2 represents 54°c
so 315×54 all over 25 ...gives you 680.4
2.
Which of the following has the greatest momentum?
A.
0.2 kg ball moving at 40 m/s
В.
500 kg car traveling at 16 m/s
С.
2000 kg truck traveling at 9 m/s
D
50 kg child skateboarding at 4 m/s
Answer:
I'm corona positive and isolated feeling depressed just logged in to talk someone but people ignoring me thanks for this behaviour got disappointed bye everyone logging out had a great time
How are wavelength, pitch, frequency, and energy all related?
Answer:
he word that musicians use for frequency is pitch. The shorter the wavelength, the higher the frequency, and the higher the pitch, of the sound. In other words, short waves sound high; long waves sound low. ... In other words, it sounds higher
Explanation:
when heating a sample of liquid water, which of the following best describes the point at which boiling begins?when heating a sample of liquid water, which of the following best describes the point at which boiling begins?
When heating a sample of liquid water, the point at which boiling begins is best described as the temperature at which the vapor pressure of the liquid equals the atmospheric pressure.
The point at which boiling begins is when the vapor pressure of the liquid equals the atmospheric pressure. At this point, the liquid can no longer hold any more vapor and bubbles of vapor form and rise to the surface. The temperature at which this occurs is called the boiling point.
For water at sea level, the boiling point is 100°C (212°F). However, the boiling point of water can vary depending on the atmospheric pressure. At higher altitudes, the atmospheric pressure is lower, so the boiling point of water is lower. For example, at the top of Mount Everest, the boiling point of water is about 70°C (160°F).
The boiling point of a liquid can also be affected by the presence of impurities. For example, salt water has a higher boiling point than pure water. This is because the salt molecules interfere with the formation of water vapor.
To learn more about atmospheric pressure click here
https://brainly.com/question/1391071
#SPJ11
if the incident intensity of the light is 78 w/m, what is the intensity of the light that emerges from the filter? (express your answer to two significant figures.)
The intensity of the light that emerges from the filter is 38 w/m.
According to Malus's Law, the intensity of light that passes through a polarizer is proportional to the cosine squared of the angle between the transmission axis of the polarizer and the direction of polarization of the light. The equation is given as I = I_0 cos²θ where I is the transmitted light intensity, I_0 is the incident light intensity, and θ is the angle between the polarization direction and the transmission axis of the polarizer.In this case, the incident intensity of light is 78 W/m. Since the filter is placed perpendicular to the direction of polarization of the incident light, the angle between the polarization direction and the transmission axis of the polarizer is 90°. Thus, θ = 90°, cos θ = 0, and the transmitted light intensity is zero. Therefore, the intensity of the light that emerges from the filter is 0.
Force is the degree, volume, or greatness of a thing, like fire, feeling, climate, work, or energy. The word "intensity" is frequently associated with rage, passion, and violence. It is used to talk about the intensity of things like a love affair or perhaps a flame.
Know more about intensity, here:
https://brainly.com/question/17583145
#SPJ11
Light falling on a metal surface causes electrons to be emitted from the metal by the photoelectric effect.
As we decrease the frequency of this light, but do not vary anything else (there may be more than one correct answer),
A: the number of electrons emitted from the metal increases.
B: the maximum speed of the emitted electrons decreases.
C: the maximum speed of the emitted electrons does not change.
D: the work function of the metal increases.
Enter the letters of all the correct answers in alphabetical order. Do not use commas. For instance, if you think assumptions B and D are required, enter BD.
B: the maximum speed of the emitted electrons decreases.
The photoelectric effect is the phenomenon where electrons are emitted from a metal surface when light of sufficient energy, or frequency, falls on it. The energy of a photon of light is directly proportional to its frequency (E = hf), where h is Planck's constant and f is the frequency of the light.
When the frequency of the incident light is decreased, the energy of each photon decreases. According to the photoelectric effect equation (E = hf = Φ + 1/2mv²), where Φ is the work function of the metal and v is the speed of the emitted electron, if the energy of the incident photon is lower than the work function, no electrons will be emitted.
Since the frequency of the light is directly related to its energy, decreasing the frequency decreases the energy of the photons. Consequently, fewer electrons will have sufficient energy to overcome the work function and be emitted from the metal. Therefore, the number of electrons emitted from the metal decreases.
Furthermore, the maximum speed of the emitted electrons is determined by the energy of the incident photons. With decreased frequency and lower energy photons, the maximum kinetic energy of the emitted electrons decreases. As kinetic energy is directly proportional to the square of the velocity (1/2mv²), the maximum speed of the emitted electrons decreases.
The correct answer is B: the maximum speed of the emitted electrons decreases. As the frequency of the incident light is decreased, the number of electrons emitted from the metal also decreases, and the maximum speed of the emitted electrons decreases due to the lower energy of the incident photons.
To know more about electrons visit :
https://brainly.com/question/860094
#SPJ11
A 95 kg person climbs some stairs at a constant rate, gaining 2.8 meters in height. Find the work done by the person, in joules, to accomplish this task.
The work done by the person to climb some stairs at a constant rate and gain 2.8 meters in height is approximately 2605.86 J.
The work done by the person can be calculated using the formula W = Fd where W is the work done, F is the force applied and d is the distance moved in the direction of the force.
In this case, the force applied is equal to the weight of the person which can be calculated using the formula F = mg where m is the mass of the person and g is the acceleration due to gravity which is approximately 9.81 m/s².
Given that the mass of the person is 95 kg, we can calculate the force applied as follows:
F = mg = (95 kg)(9.81 m/s²) = 931.95 N
The distance moved in the direction of the force is equal to the height gained which is 2.8 meters.
Now we can substitute these values into the formula for work done:
W = Fd
W = (931.95 N)×(2.8 m)
W ≈ 2605.86 J
Therefore, the work done by the person to climb some stairs at a constant rate and gain 2.8 meters in height is approximately 2605.86 J.
To know more about force
https://brainly.com/question/12970081
#SPJ4
Atmospheric pressure on the peak of Mt. Everest can be as low as 0.197 atm, which is why
climbers need to bring oxygen tanks for the last part of the climb. If the climbers carry 10.0
liter tanks with an internal gas pressure of 40 atm, what will be the volume in liters of the gas
when it is released from the tanks?
Answer:2,030
Explanation:
40 atm x 10.0 L = 400
400/0.197 atm = 2,030