When a CDMA smartphone tries to connect to a cellular network while in transit, both PRI and PRL are utilized.
The PRL is used on CDMA networks, contains radio bands, sub bands, and service provider IDs, enables over-the-air updates, and helps your phone connect to the proper tower.
PRI, or Product Release Instructions, updates The radio settings in the PRI, which may include ID numbers, network codes, country codes, and other crucial data, let your phone to connect to the network of the appropriate mobile operator.
To know more about PRL click on the below link:
https://brainly.com/question/14290713
#SPJ4
You are configuring a new system and want to use a RAID 0 array for the operating system using SATA disks and the RAID functionality built into the motherboard. Which of the following actions will you take as part of the configuration?
The action must be take as part of the configuration a new system using RAID 0 array for the operating system is load the RAID drivers during operating system installation.
What is RAID 0?RAID 0 is one type of RAID that can be used in SSD disks including SATA disks or NVME disks. This function it to broken data into stripes and then each stripes will written simultaneously into two or more drives. The RAID 0 is not for redundant data but for increasing the speed.
Since it will broken data into multiple drives, then the RAID 0 drives must be loaded when the operating system is in installation process.
You question is incomplete, but most probably your full question was
You are configuring a new system and want to use RAID 0 array for the operating system using SATA disks and the RAID functionality built into the motherboard. Which of the following actions will you take as part of the configuration?
a. Set master/slave jumpers on the hard drives.
b. Set the disk mode to ACHI in the BIOS.
c. Set the disk mode to IDE in the BIOS.
d. Load the RAID drivers during operating system installation.
Learn more about RAID 0 here:
brainly.com/question/28759241
#SPJ4
two parties are exchanging messages using public key cryptography. which of the following statements describes the proper procedure for transmitting an encrypted message?
two parties are exchanging messages using public key cryptography. The procedure should be,
The sender encrypts the message using the recipient's public key, and the recipient decrypts the message using the recipient's private key.
What is a private key?
A key in cryptography is a piece of data—typically a string of numbers or letters—that is saved in a file and used to encode or decode cryptographic data by being run through a cryptographic algorithm. When using a cryptographic technique to encrypt and decode data, a private key, sometimes referred to as a secret key, is a variable that is employed. Only the key's creator or parties permitted to decrypt the data should have access to secret keys.
When using a cryptographic technique to encrypt and decode data, a private key, sometimes referred to as a secret key, is a variable that is employed. Only the key's creator or parties permitted to decrypt the data should have access to secret keys.
To learn more about a private key, use the link given
https://brainly.com/question/15346474
#SPJ4
you want to compare the average mpg of cars with 4 and 8 cylinders. the null hypotheses of: h null: the average of mpg for cars of 4 cylinders
The four-cylinder engine is smaller, lighter, and more fuel-efficient than the V8, but it typically cannot produce the same amount of horsepower as a V8. A few four-cylinder engines, however, surprisingly outperform a V8 in terms of speed.
Are four-cylinder engines more fuel-efficient?A four-cylinder engine typically has better fuel efficiency than a six-cylinder. Because of its lower horsepower as well as its smaller size and lighter weight, it has better fuel economy.
What is a 4 cylinder's high mileage?Everything depends on how the car has been maintained and driven. At 200,000 miles, some people might want to switch to a high mileage oil, while others might want to change to a high mileage oil at 80,000 miles. For the average driver, anything over 100,000 miles could safely be considered a high mileage vehicle.
To know more about fuel economy visit:-
brainly.com/question/24506260
#SPJ4
Question:-"you want to compare the average mpg of cars with 4 and 8 cylinders. the null hypotheses of: h null: the average of mpg for cars of 4 cylinders"
Which of the following personally-owned computer peripherals is permitted for use with Government-furnished equipment?
A headset with a microphone through a Universal Serial Bus (USB) port. – correct
Answer:
A headset with a microphone that connects to a computer through a Universal Serial Bus (USB) port is generally permitted for use with Government-furnished equipment. USB devices are common and widely used, and they are generally considered safe and secure for use with government computers.
It is important to note that the use of personally-owned computer peripherals with Government-furnished equipment may be subject to specific policies and guidelines. It is always best to check with your organization's IT department or guidelines before using any personally-owned device with government equipment.
Yes, a headset with a microphone through a Universal Serial Bus (USB) port is permitted for use with Government-furnished equipment as it is considered a basic necessity for day-to-day operations.
USB connections make it possible to connect compatible devices to computers, allowing users to access and use input and output devices such as a microphone for audio, speakers for sound, or a printer for printing. USB connections also make it possible to add extra storage to a computer for when additional memory is needed. Providing headsets for personnel to use with Government-furnished equipment is therefor necessary and permitted.
Yes, a headset with a microphone through a Universal Serial Bus (USB) port is permitted for use with Government-furnished equipment as it is considered a basic necessity for day-to-day operations.
Learn more about the computer peripherals here:
https://brainly.com/question/32824922.
#SPJ2
What is one similarity between Chloe in "Jan Street Chase" and the speaker in "Simon Lee: The Old Huntsman"
What is one similarity between Chloe in "Jan Street Chase" and the speaker in "Simon Lee: The Old Huntsman"
They both recognize how their environments change as the result of the events.
They both take action when they see people in need.
The both become upset when things do not go as planned
they both understand how to use their wits to solve problems.
The one similarity between Chloe in "Jan Street Chase" and the speaker in "Simon Lee: The Old Huntsman" is as follows:
They both take action when they see people in need.Thus, the correct option for this question is B.
How does an author create a humorous voice in the text?An author creates a humorous voice in the text through the utilization of descriptive language in order to derive the actual situation in the story with respect to context.
According to the context of this question, both Chloe in "Jan Street Chase" and the speaker in "Simon Lee: The Old Huntsman" are generally humorous in nature with a lot of humanity and able to help out people when they actually need it.
Therefore, they both take action when they see people in need to determine the one similarity between Chloe in "Jan Street Chase" and the speaker in "Simon Lee: The Old Huntsman".
To learn more about Descriptive language, refer to the link:
https://brainly.com/question/14775032
#SPJ1
Develop a Tic-Tac-Toe game using the JavaFX FXML. The requirements mentioned is just the base. 1) Game is going to have at least 2 Scenes, Login Scene and GamePlay Scene. 2) Game will have 2 fxml files and 2 controller classes. 3) In the Login Scene, it is sufficient to learn the Names of the Players 4) Game will then load the GameScene with the Player Names updated on the GameBoard. 5) The game starts by clicking the "Start" button and "Start" button is disabled until the game finishes. The name of the player who is going to play is displayed in a different color to emphasize. 6) The players uses different symbols and play the game one by one. 7) At each turn, program need to check if there are any spots left or if there is a winner. If so, should prompt it. 8) Count the number of times each player wins and update the Game Scene.
To develop a Tic-Tac-Toe game using the JavaFX FXML, check the code given below.
What is java?Java is a popular programming language for creating web applications. With millions of Java applications currently in use, it has been a well-liked option among developers for more than 20 years.
Java is a multi-platform, object-oriented, network-centric language that can be used as a platform by itself. It is a quick, safe, and dependable programming language for creating anything from big data applications and server-side technologies to mobile apps and enterprise software.
All programming languages are ways of speaking to computers. Only electronic communication triggers a response from machine hardware. As a link between human language and hardware language, high-level programming languages like Java are used.
Learn more about java
https://brainly.com/question/25458754
#SPJ4
I am working on 8.3.6 Girl Scout Designation
in JavaScript if anyone has done this lesson please tell me your code i cant seem to figure this out here is the prompt:
Write a program that will determine if a girl scout has reached ‘Gold’ status.
Ask the user for three variables:
- The number of boxes of cookies sold
- The total number of badges they have
- The number of volunteer hours they have worked
(Make sure you ask for the variables in this order!)
A girl scout has reached gold status if they sold at least 100 boxes of cookies, OR they sold at least 50 boxes and have at least 10 badges and have volunteered at least 25 hours. You will need to use both logical and comparison operators here.
Once you determine their status, let them know!
For example, if the user gave the following input:
How many boxes did you sell? 60
How many badges do you have? 12
How many hours have you volunteered? 30
You should respond with the following output:
Is gold status? True
The JavaScript program that determines if a girl scout has reached 'Gold' status is given as follows:
var nBoxes = prompt("How many boxes did you sell?");
var nBadges = prompt("How many badges do you have?");
var nHours = prompt("How many hours have you volunteered?");
var isGold = (nBoxes >= 100) || (nBoxes >= 50 && nBadges >= 10 && nHours >= 25);
alert("Is gold status? " + isGold);
How to write the program?The first step is reading the input variables from the user, using the prompt command.
There are three variables that have to be read, and they are read as follows:
var nBoxes = prompt("How many boxes did you sell?");
var nBadges = prompt("How many badges do you have?");
var nHours = prompt("How many hours have you volunteered?");
Then the conditional is called to verify if the girl scout has achieved gold status or not, as follows:
var isGold = (nBoxes >= 100) || (nBoxes >= 50 && nBadges >= 10 && nHours >= 25);
The alert command just prints if the person has achieved the status or not.
More can be learned about JavaScript programming at https://brainly.com/question/14825779
#SPJ1
What is a string of data made up of?
OA. "True" or "false" values
OB. Any set of characters
OC. Numbers only
OD. Numbers or images
A string consists of one or more characters, which can include letters, numbers, and other types of characters.
What is a string explain?A string is a data type used in programming, that is used to represent text rather than numbers. A string is a sequence of characters and can contain letters, numbers, symbols and even spaces. It must be enclosed in quotation marks for it to be recognized as a string.Strings are used for storing text/characters. For example, "Hello World" is a string of characters.He received the nickname “Sting” from one of his Phoenix Jazzmen bandmates because of the black-and-yellow striped sweater he often wore while performing. After graduating in 1974, Sting taught at St. Paul's First School in Cramlington for two years.Strings, which are widely used in Java programming, are a sequence of characters. In the Java programming language, strings are objects. The Java platform provides the String class to create and manipulate strings.
To learn more about string of data refer to:
https://brainly.com/question/20813205
#SPJ1
Answer: B. Any set of characters
Explanation:
did the test
Which of the following is not a fundamental way to approach the creation of a new information system?
a. develop a custom application in-house
b. rely on an external vendor to build the system
c. purchase a software package and customize it
d. rely on end-users to develop it themselves
e. all of these are ways to create new information systems
Answer:
The correct answer is d. rely on end-users to develop it themselves.
All of the other options (a. develop a custom application in-house, b. rely on an external vendor to build the system, and c. purchase a software package and customize it) are common ways to approach the creation of a new information system. These approaches involve hiring professionals or purchasing software packages to design, build, and implement the system.
Option d, relying on end-users to develop the system themselves, is not a fundamental way to approach the creation of a new information system. End-users are typically not trained in the technical skills needed to design and build an information system, and they may not have the necessary expertise or resources to do so. It is generally more effective to rely on professionals or pre-existing software packages to create a new information system.
when declaring class data members it is best to declare them as . group of answer choices protected members restricted member public members private members
When declaring class data members it is best to declare them as private members. A Java access modifier is a private keyword. It may be used to inner classes, methods, and variables.
It is the sort of access modifier that is most constrained.Only members of the same class have access to the private access modifier.We are unable to make an interface and outer class private.The ideal way to utilize the private keyword in Java is to entirely encapsulate a class by making all of its data members private.Making a class' constructor private prevents others from making instances of that class.Any method that is being overridden must not be more restrictive than the original method, which must be stated in the subclass.To know more keywords click on the below link:
https://brainly.com/question/18257856
#SPJ4
Blockchain maintains and records data and transactions in a new type of database
system. This technology is used across organizations in an ecosystem and allows
products histories to be captured as they move to the consumer.
How might this technology help inter-organization processes?
O by increasing mediators between transaction partners
O by decreasing the likelihood of record tampering
O by creating an agile and dynamic database
O by limiting data sharing only to a single party
OI don't know this yet.
The way in which blockchain technology help inter-organization processes include the following: D. by limiting data sharing only to a single party.
What is a blockchain?In Computer technology, a blockchain can be defined as a digital and dynamic financial system that is designed and developed to be used in recording and maintaining transactions that are associated with or made through the use of a bitcoin, usually as a database containing various set of data.
This ultimately implies that, data is a resource that typically represent all of the transactional data, sender, recipient (receiver), and the number of bitcoins in a block in a blockchain.
In this context, we can infer and logically deduce that a blockchain technology limits the sharing and exchange of data only to a single party.
Read more on blockchain here: brainly.com/question/25700270
#SPJ1
In database access control area, which of following statement is the best to explain Authentication O Methods to restrict users to access the database system
O Control to access to partial database O verifying whether a user is the claimed user O defining the scope of access O All above mentioned
The best way to describe authentication in relation to database access control is to use the statement that checks to see if a user is who they claim to be.
What does a database employ to regulate user access?Privileges govern every user's access to identified objects under discretionary access control. A privilege is the ability to interact with a specified object in a specific way, such as by querying a table. Users may be granted privileges at the discretion of other users, thus the name "discretionary access control."
Database access control: what is it?Database access control, often known as DB access control, is a technique for limiting unauthorized individuals' access to sensitive data and granting access to user groups that are permitted to view it in order to prevent data breaches in database systems.
To know more about database visit :-
https://brainly.com/question/28964112
#SPJ4
returns: logits: tensor of shape (n,num classes,h,w) representing class scores at each pixel yhat: tensor of shape (n,h,w) representing predicted labels at each pixel main loss: loss computed on output of final classifier aux loss:loss computed on output of auxiliary classifier (from intermediate output). note: aux loss is set to a dummy value, since we are not using an auxiliary classifier here, but we keep the same api as pspnet in the next section
Logits: A tensor of shape (n, num_classes, h, w) representing the class scores at each pixel.
What is tensor?
Tensor is a mathematical object that can take the form of a multidimensional array and is used to represent physical data such as vectors, scalars, and matrices. It can also be used to represent higher order relation ships between data, such as those found in nonlinear equations.
Tensors are often used in various scientific fields such as physics, engineering, and mathematics. They are integral to the fields of machine learning, deep learning, and artificial intelligence, as they represent the data that is manipulated and processed by the algorithms used to create these technologies.
Tensors are also used in areas such as predictive analytics, image recognition, and natural language processing.
Yhat: A tensor of shape (n, h, w) representing the predicted labels at each pixel.
Main Loss: The loss computed on the output of the final classifier.
Aux Loss: A dummy value, since we are not using an auxiliary classifier here.
To learn more about tensor
https://brainly.com/question/28811888
#SPJ4
NASAA has the power to set record retention rules for a State-Registered Adviser that cover which of the following records?
Financial assets NASAA held by foreign financial institutions for clients.
USA 2002 Rule 502 (c) An Investment Advisory Contract's Contents [Introduction] If the claimed activity is fraudulent, the restrictions of this subsection apply to federally covered investment advisers.
Which of the following is against NASAA regulations for an advising contract?The ideal response is B. An advisory contract's "liquidated damages provision" would specify that the adviser is liable if the client incurs losses.
What is the model rule for NASAA?Investment adviser representatives will be better equipped to assist their clients if they are knowledgeable about current regulatory compliance standards and best practises in their areas of specialisation, according to William R.
To know more about NASAA visit:-
https://brainly.com/question/17030439
#SPJ4
Compare physical access controls with network security to identify the statements that accurately connect the similarities between them. (Select two)
Authentication provides users access through the barriers, while authorization creates the barriers around a resource.
An example of authentication in networking is a user logging into the network with a smart card. Similarly, authentication in physical security is demonstrated by an employee using a badge to enter a building.
Authorization provides users access through barriers, while authentication creates barriers around a resource.
An example of authorization in networking is a user logging into the network with a smart card. Similarly, authorization in physical security is demonstrated by an employee using a badge to enter a building.
The statements that accurately connect the similarities between physical access controls and network security are option A and C:
Authentication provides users access through the barriers, while authorization creates the barriers around a resource.An example of authentication in networking is a user logging into the network with a smart card. Similarly, authentication in physical security is demonstrated by an employee using a badge to enter a building.What is physical access controls?In the 2 physical access controls and network security, authentication is the process of verifying the identity of a user, device, or system.
This typically involves requiring the user to provide some form of credentials, such as a username and password, a smart card, or a biometric identifier, to prove their identity.
Therefore, Authorization is one that is seen as the process of granting or denying access to resources based on the authenticated identity of the user, device, or system.
Learn more about physical access controls from
https://brainly.com/question/15084683
#SPJ1
You are building a new computer and want to purchase a motherboard that has integrated town with digital audio output. Which of the following words would you most likely find on the motherboard face plate that indicates digital audio support?
Answer:
The word that you would most likely find on the motherboard face plate that indicates digital audio support is "optical" or "S/PDIF." This refers to the presence of an optical digital audio output, which uses fiber-optic cables to transmit digital audio signals. Other terms that you may see include "HDMI" or "DVI," which refer to digital video interfaces that also support digital audio. It is also possible that the motherboard may have a "TOSLINK" port, which is a type of optical digital audio connector.
It is important to note that having a motherboard with integrated digital audio output does not necessarily mean that it will support all types of digital audio formats. For example, some motherboard may support only basic stereo audio, while others may support more advanced formats such as surround sound or high-resolution audio. Be sure to check the motherboard's specifications and compatibility with your audio system before making a purchase.
Explanation:
You want to build a new gaming computer but intend to reuse as many of the parts as possible from your old computer. You have determined that the motherboard and the case will be reused, and you will purchase a new graphics card, sound card, network interface card, and a USB 3.0 expansion card to increase your system's overall speed and performance. You are a bit worried that your old computer's power supply may not be able to support all of these new expansion cards. Which of the following cards is MOST likely to consume the most power during operations and require you to purchase a new power supply to support it?
Options are :
O USB 3.0
O Sound card
O NIC
O Graphics card
The graphics card is most likely to consume the most power during operations and require you to purchase a new power supply to support it. Graphics cards are responsible for rendering images and video on a computer
Graphics cards are responsible for rendering images and video on a computer, which is a resource-intensive task that requires a significant amount of power. High-end graphics cards can draw up to 250 watts or more of power, depending on the model and the settings it is running at. In contrast, sound cards, NICs, and USB 3.0 expansion cards generally have much lower power requirements and are not as likely to require an upgrade to the power supply.
It is important to ensure that the power supply in your computer is sufficient to support all of the expansion cards and other components that you are using. If the power supply is not able to provide enough power, it can cause problems such as system instability, random shut downs, and even hardware damage.
Learn more about Graphics cards, here https://brainly.com/question/13498709
#SPJ4
Write an instruction that adds the value 12 to the value in register $6. Use an instruction which ignores overflow. A. add $6, 12 B. addi $6, $0, 12 C. addiu $6, $6, 12 D. addi $6, 12
Answer:
Explanation:
Write an instruction that adds the value 12 to the value in register $6. Use an instruction which ignores overflow. A. add $6, 12 B. addi $6, $0, 12 C. addiu $6, $6, 12 D. addi $6, 12
which of the following sentences is correct as written? [hint--study correct semicolon usage]. after john ran with the bulls in pamplona; he no longer craved adventure. the great white shark attacked the boy; however, when it ate his hands and feet. russell westbrook averaged a triple double in the 2018 nba season; as a result, he beat oscar robertson's record from the early 1960s. lamar jackson is a dual-threat nfl quarterback; who can use his cannon-like arm to hit receivers in stride, or outrun linebackers with his speed and athleticism.
The sentence that is correct as written is: "After John ran with the bulls in Pamplona; he no longer craved adventure."
What is sentence?
A sentence is indeed a collection of words that expresses a full idea. Beginning with such a capital letter with ending with a space, question mark, the exclamation point are typical punctuation patterns. A sentence may also have an objective or complement in addition to the subject and verb. It may also include other phrases and modifiers. Sentences are composed using grammar principles and serve as the basis for both speech and writing.
To learn more about sentence
https://brainly.com/question/552895
#SPJ4
The hr manager of veep communications notices a lot of employees waste valuable time surfing social media websites. the hr manager requests you (a network administrator) to prevent the employees' access to these websites. which of the following firewalls will you use in this scenario?
- stateless firewall
- host based firewall
- application layer firewall
- packet filtering firewall
In this scenario, it would be most appropriate to use a packet filtering firewall to prevent employees from accessing social media websites.
A packet filtering firewall is a type of firewall that operates at the network layer (layer 3) of the OSI model. It works by examining the header information of each incoming and outgoing packet and making a decision to allow or block the packet based on predefined rules. These rules can be based on various criteria, such as the source and destination IP addresses, port numbers, and protocol types.
A packet filtering firewall is well-suited for this task because it can be configured to block packets based on their destination website address. This allows the hr manager to block access to specific social media websites while still allowing access to other websites that may be necessary for employees to do their jobs.
Learn more about packet filtering firewall, here https://brainly.com/question/13098598
#SPJ4
(Choose all that apply) The ability to perform analog-to-digital conversion allows us to:
Group of answer choices
alter colors in the image
darken an image
change the contrast of an image
brighten an image
We can tweak an image's colors, change its contrast, and brighten it thanks to the capacity to execute analog-to-digital conversion.
What is the name of the procedure that transforms analogue into digital?An electronic technique known as analog-to-digital conversion (ADC) converts an analog signal—which is continuously variable—into a multilevel digital signal without changing the signal's fundamental characteristics.
Who or what is the analog to digital converter?"A/D converter" is the right response, which is D. A digital signal is necessary for a digital controller's input. Analog signals are produced via 4-20 mA transmitters. As a result, a device is needed to convert an analog (A) signal to a digital (D) signal. An "A/D converter" is a specific type of equipment.
To know more about analog-to-digital visit :-
https://brainly.com/question/23777902
#SPJ4
an excel data source must include ___
A) row labels in the first column
B) column labels in the first row
C) column labels in any row
D) row labels in any column
Answer:
Option (B)
Explanation:
To use Excel files as a data source, you must ensure that the worksheet data is in list format. This means that the data must be set up in a database format consisting of one or more named columns. The first row in each column must have a label, and there can be no blank columns or rows within the list.
Answer:B must have
Explanation:
can
A selection statement specifies that an action is to be repeated while some condition remains true.
A selection statement specifies that an action is to be repeated while some condition remains true is a true statement.
When a condition is still true, does the selection statement repeat the action?Code (statements) that are said to executed only when a specific condition is met are known as selection statements, sometimes known as conditional statements. A strong tool for managing the execution of code statements is selection.
Therefore, one can say that when a condition is still true, an action is to be repeated, according to a selection statement.
Learn more about selection statement from
https://brainly.com/question/13438284
#SPJ1
A selection statement specifies that an action is to be repeated while some condition remains true. True or false
Consider the following method countNegatives, which searches an ArrayList of Integer objects and returns the number of elements in the list that are less than 0. public static int countNegatives(ArrayList arr){int count = 0; for (int j = 0; j < arr.size(); j++) // Line 4{if (arr.get(j) < 0){count++;}}return count;}
Which of the following best explains the impact to the countNegatives method when, in line 4, j < arr.size() is replaced with j <= arr.size() - 1 ?
A. It has no impact on the behavior of the method.
B. It causes the method to ignore the last element in arr.
C. It causes the method to throw an IndexOutOfBounds exception.
D. It reduces the size of arr by 1 and the last element will be removed.
E. It changes the number of times the loop executes, but all indexes in arr will still be accessed.
The ArrayList's current int element count is returned by the size() function. Size() gives zero if the ArrayList is empty. Get(int index); public Thus option A is correct.
What searches an ArrayList of Integer objects and returns?The method get, which we previously described, is documented as having an argument type of int and a return type of E. This means that when get is called on an object of type ArrayListInteger>, it returns an Integer; similarly. When it is called on an object of type ArrayListString>, it returns a String, and so on.
If the requested element is present in the list, it returns true. It is used to return the first instance of the provided element in this list at the supplied index, or -1 if the element is not present in the list.
Therefore, It has no impact on the behavior of the method.
Learn more about ArrayList here:
https://brainly.com/question/13989388
#SPJ4
1. Write a python program that uses the following initializer list to find if a random value entered by a user is part of that list. V = [54, 80, 64, 90, 27, 88, 48, 66, 30, 11, 55, 45] The program should ask the user to enter a value. If the value is in the list, the program should print a message that contains the index. If it is not in the list, the program should print a message containing -1. Hint: The values in the list are integers, so you should also get the value from the user an integer. We can assume the user will only enter integer values. Sample Run Search for: 64 64 was found at index 2
Which of the following processes can simulate nearly all colors by combining the four primary colors and is used to print an ad in full color?
O stripping O trapping O kerning O cmyk printing O color bleeding
The processes can simulate nearly all colors by combining the four primary colors and is used to print an ad in full color is CMYK printing.
What is CMYK?CMYK or cyan, magenta, yellow, key is a primary color in printing. These colors are four primary colors so it can be mixed with each other to create new colors when the printing process occurs to produce colors that are far more accurate for printing than RGB.
Since in the question is said about combining the four primary colors to used in printing, so the correct option is CMYK printing.
Learn more about CMYK here:
brainly.com/question/29462558
#SPJ4
Which of the following print options allows you to select different print options before sending the contents of the current object immediately to the printer?
Select one:
a. Quick Print
b. Print
c. Print Preview
d. none of the above
Print options allows you to select different print options before sending the contents of the current object immediately to the printer : Print
What is an print?A print is an image that has been formed on one surface and transferred to another via a repeatable process, allowing the creation of several impressions.A print is a piece of graphic art that the artist intended to be created as an original work of art rather than a replica of another piece of art in a different media. Prints are made by inking or carving an image onto a hard surface, or matrix, such a stone, metal plate, or wooden block.Types of the prints are :Surface Printing.Flexographic Printing.Screen Printing.Rotary Screen.Gravure Printing.Digital Printing.Learn more about print refer to ;
https://brainly.com/question/27962260
#SPJ4
You’re a project manager of a small team looking to hire. You have received many resumes to review, and while most of them look well qualified, two of the resumes are very poorly formatted and use wacky fonts and graphics. Would you consider these individuals as qualified candidates and be willing to interview them? Please justify your answer by briefly summarizing the discussion you might have with these candidates. Consider the following prompts as you develop your post: Explain why professional formatting matters on a resume or explain why it doesn’t. Argue whether we can infer anything about a candidate’s ability to work in a professional environment based on his or her resume’s formatting. Compare how you would address a resume with wacky fonts to how you would respond to grammatical errors in a resume.
No, you never consider those resumes that use wacky fonts and graphics. This is because it is the primary criterion that candidates have to fulfill in the hiring process.
What is the responsibility of a project manager?Project managers are responsible for planning, organizing, and directing the completion of specific projects for an organization while ensuring these projects are on time, on budget, and within scope.
Professional formatting justifies the capabilities and strength of candidates with respect to their qualifications. It increases your chances for the hiring process with the selection of your resumes.
A candidate’s ability to work in a professional environment based on his or her resume’s formatting is significantly based on their curiosity and willingness to do work in the same culture.
To learn more about Professional formatting, refer to the link:
https://brainly.com/question/17971683
#SPJ1
A____is a form of server software that allows nontechnical personnel to create and edit website pages, using any web browser and without complex programming knowledge
A wiki is a form of server software that allows nontechnical personnel to create and edit website pages, using any web browser and without complex programming knowledge.
What is web browser?A web browser is a piece of software used to access websites. When a user requests a web page from a specific website, the browser obtains the page's files from a web server and then displays the page on the user's screen.
On a variety of gadgets, including desktops, laptops, tablets, and smartphones, browsers are used. An estimated 4.9 billion people used a browser in 2020. With a 65% global market share across all devices, Chr0me is the most popular browser, followed by Safàri with 18% of the market.
Although they are frequently confused, a web browser and a search engine are not the same thing. A search engine is a website that offers links to other websites.
Learn more about web browser
https://brainly.com/question/22650550
#SPJ4
What are steps for properly cleaning a PC or Mac laptop fan? Check all boxes that apply.
For a PC laptop, remove the CPU case, locate the fans, and then use compressed air to blow dirt through the internal slits.
For a Mac laptop, visit an Apple Store or take a look at your Apple Care Protection Plan, if applicable.
For PC and Mac laptops, use compressed air on all ports and drives.
For PC and Mac laptops, consider getting an experienced technician to help you.
The steps for properly cleaning a PC or Mac laptop fan is :
For a Mac laptop, visit an Apple Store or take a look at your Apple Care Protection Plan, if applicable.For PC and Mac laptops, consider getting an experienced technician to help you.What is meant by mac laptop ?The MacBook range of Mac notebook computers, which utilise the macOS operating system, has been produced and offered for sale by Apple Inc. since 2006. When Apple announced in 2005 that it will move to employing Intel CPUs, the PowerBook and iBook brands were replaced.
The fact that a MacBook and a laptop use separate operating systems is their main distinction. Another laptop running the Macintosh operating system is the MacBook. Unlike a typical laptop, which comes with either a Windows or a Linux operating system.
The high-quality audio, video, and typing experiences of MacBook's are another factor that sets them apart from the competitors and makes them more immersive gadgets overall.
To learn more MacBook refer to :
https://brainly.com/question/1002481
#SPJ1