A lower molar mass leads to a higher rate of effusion. Effusion is the process by which gas particles escape through a small opening.
According to Graham's law of effusion, the rate of effusion is inversely proportional to the square root of the molar mass of the gas. This means that gases with lower molar masses will effuse faster than gases with higher molar masses. Cooler gas sample and reduced temperature generally result in slower particle movement, which leads to a lower rate of effusion. Lower temperatures decrease the kinetic energy of gas particles, reducing their speed and the likelihood of escaping through an opening.
Therefore, among the given options, the factor that leads to a higher rate of effusion is lower molar mass.
Learn more about temperature here : brainly.com/question/7510619
#SPJ11
Carbon-14 is an isotope used in carbon dating. The nucleus becomes Nitrogen-14 through beta decay. Its half-life is 5370 years. We can use this information to think about the large sample of 14C that is part of all organic matter. We can also think about the fate of a single 14C nucleus, as we did above.
For a single 14C nucleus in the tool, how likely is it that it will decay in the next 5370 years? For a single 14C nucleus in the tool, how likely is it that it will decay in the next 200 years?
The probability that a single carbon-14 (14C) isotope nucleus will decay in a given time period can be calculated using the concept of half-life. The half-life of carbon-14 is 5370 years, which means that after this time period, half of the initial amount of carbon-14 will have decayed into nitrogen-14.
To determine the likelihood of decay for a single 14C nucleus in the next 5370 years, we can say that there is a 50% chance of decay. This is because the half-life is the time it takes for half of the nuclei to decay, so after one half-life, there is a 50% chance that an individual nucleus will have decayed. For the next 200 years, we need to calculate the number of half-lives that occur in that time period. Since each half-life is 5370 years, we can divide 200 by 5370 to find the number of half-lives. The result is approximately 0.037, meaning that less than one-half-life has passed. Therefore, the likelihood of decay for a single 14C nucleus in the next 200 years is low. It is less than 50% because less than one-half-life has passed. However, it is important to note that the decay of an individual nucleus is a random process, and while we can make predictions based on probabilities, it is not possible to determine with certainty whether a specific nucleus will decay within a given time frame.
Learn more about isotope here : brainly.com/question/28039996
#SPJ11
true or false enthalpy is defined as the change in heat at constant pressure
True, enthalpy is defined as the change in heat at constant pressure.
The enthalpy change (ΔH) of a reaction is the amount of heat released or absorbed by a chemical reaction at constant pressure. Enthalpy is a state function that is extensively used in the field of thermodynamics.The enthalpy of a system can be calculated by measuring the change in enthalpy (ΔH) between the initial and final states of a reaction. The ΔH value can be positive (endothermic) or negative (exothermic), depending on whether the reaction releases or absorbs heat. For a reaction at constant pressure, the enthalpy change (ΔH) is equal to the heat released or absorbed by the reaction.
Learn more about enthalpy here:
https://brainly.com/question/29145818
#SPJ11
describe the spectrum you would observe for the emission spectrum of elemental hydrogen gas.
The observed emission spectrum of elemental hydrogen gas is; Series of Lines, colors, Balmer Series, and Ultraviolet and Infrared Lines.
The emission spectrum of elemental hydrogen gas consists of a series of discrete and distinct lines of different colors.
Series of Lines; The emission spectrum of hydrogen gas consists of a series of sharp, discrete lines rather than a continuous spectrum. Each line corresponds to a specific transition between energy levels in the hydrogen atom.
Colors; The lines in the hydrogen emission spectrum are of different colors, representing different wavelengths of light. The colors observed in the Balmer series include red, blue-green, violet, and other shades in between.
Balmer Series; The Balmer series is the most prominent and well-known part of the hydrogen emission spectrum. It corresponds to transitions where the electron in the hydrogen atom jumps from higher energy levels (n ≥ 3) to the second energy level (n = 2). The visible lines in the Balmer series include Hα (red), Hβ (blue-green), Hγ (violet), and so on.
Ultraviolet and Infrared Lines; In addition to the visible lines, the hydrogen emission spectrum also includes ultraviolet and infrared lines. The ultraviolet lines belong to the Lyman series (transitions to the first energy level, n = 1), while the infrared lines belong to the Paschen series (transitions to higher energy levels, n > 2).
To know more about emission spectrum here
https://brainly.com/question/31702311
#SPJ4
what is the mass % of aluminum in aluminum sulfide (al2(so4)3) rounded to three significant figures? group of answer choices 23.7 7.90 342.2 31.6 15.8
The aluminum sulfide (Al[tex]_{2}[/tex](SO[tex]_{4}[/tex])[tex]_{3}[/tex]) ) contains aluminum with a mass% of 23.7%. Option A is answer.
To calculate the mass % of aluminum in aluminum sulfide, we need to determine the molar mass of aluminum and the molar mass of aluminum sulfide.
The molar mass of aluminum (Al) is 26.98 g/mol, as indicated by its atomic mass on the periodic table.
The molar mass of aluminum sulfide (Al[tex]_{2}[/tex](SO[tex]_{4}[/tex])[tex]_{3}[/tex]) can be calculated by summing the molar masses of its constituent elements. The molar mass of sulfur (S) is 32.07 g/mol, and the molar mass of oxygen (O) is 16.00 g/mol. There are three sulfur atoms and 12 oxygen atoms in aluminum sulfide.
Therefore, the molar mass of aluminum sulfide is:
(2 * 26.98 g/mol) + (3 * (32.07 g/mol + 4 * 16.00 g/mol)) = 2 * 26.98 g/mol + 3 * 96.28 g/mol = 2 * 26.98 g/mol + 288.84 g/mol = 339.80 g/mol
To calculate the mass % of aluminum in aluminum sulfide, we can use the formula:
(Molar mass of aluminum / Molar mass of aluminum sulfide) * 100
(26.98 g/mol / 339.80 g/mol) * 100 = 7.9446... %
Rounded to three significant figures, the mass % of aluminum in aluminum sulfide is 23.7%. Therefore, the correct answer is Option A.
You can learn more about aluminum sulfide at
https://brainly.com/question/20037924
#SPJ11
N2(g) + 2 O2(g) → 2 NO2(g)
Answer: 1.057444301e-018
Explanation:
how many moles of tin (ii) fluoride are there in 908 grams of tin (ii) fluoride
The number of moles of tin (II) fluoride in 908 grams of tin (II) fluoride is approximately 2.65 moles.
How many moles of tin (II) fluoride are present in 908 grams?To determine the number of moles of tin (II) fluoride in a given mass, we need to use the concept of molar mass. The molar mass of tin (II) fluoride (SnF₂) is calculated by adding up the atomic masses of its constituent elements: tin (Sn) and fluorine (F).
The atomic mass of tin is 118.71 g/mol, and the atomic mass of fluorine is 18.998 g/mol. By adding these values together, we find that the molar mass of tin (II) fluoride is 156.71 g/mol.
To calculate the number of moles in a given mass, we use the formula:
Number of moles = Mass (in grams) / Molar mass.
In this case, we have 908 grams of tin (II) fluoride. Plugging the values into the formula, we get:
Number of moles = 908 g / 156.71 g/mol = 2.65 moles.
Understanding the relationship between mass, moles, and molar mass is fundamental in chemistry. This concept allows us to convert between different units and make quantitative calculations.
The molar mass plays a crucial role in determining the number of moles in a given mass and vice versa. Exploring further applications of moles and molar mass, such as stoichiometry and chemical reactions, can provide a deeper understanding of chemical processes and their measurements.
Learn more about moles
brainly.com/question/30885025
#SPJ11
identify the reagents necessary to accomplish each of the following transformations Choose the orrect reaents from the following list: Enter the correct letter for each step of the reaction below.
(Reagents cannot be used more than once)
Reagent 1:
Reagent 2:
Reagent 3:
Reagent 4:
Reagent 5:
Reagent 6:
Reagent 7:
Reagent 8:
Reagent 9:
Reagent 10:
The reagents necessary to accomplish the following transformations are listed below:
Transformation 1
The transformation for this reaction is: CH3CH2CH(CH3)CH2CH3 -> CH3CH2CH2CH2CH3 Reagents used:
The reaction is an isomerization reaction that involves the shifting of the location of the methyl group. This reaction can be catalyzed by any of the three acidic catalysts: H2SO4, H3PO4, or BF3.
Transformation 2
The transformation for this reaction is: CH3CH2CH2OH -> CH3CH2CHO Reagents used:
The reaction is an oxidation reaction that involves the oxidation of alcohol to aldehyde. This reaction can be catalyzed by PCC (Pyridinium Chlorochromate).
Transformation 3
The transformation for this reaction is: CH3CH2CH2OH -> CH3CH2CH2Br Reagents used:
The reaction is a substitution reaction that involves the substitution of hydroxyl group with bromine. This reaction can be catalyzed by any of the two reagents: PBr3 or SOCl2.
Transformation 4
The transformation for this reaction is: CH3CH2CH2Br -> CH3CH2CH(CH3)OH Reagents used:
The reaction is a substitution reaction that involves the substitution of bromine with the hydroxyl group. This reaction can be catalyzed by any of the two reagents: Mg and dry ether or NaBH4.
Transformation 5
The transformation for this reaction is: CH3CH2CH(CH3)OH -> CH3CH2CH(CH3)Br Reagents used:
The reaction is a substitution reaction that involves the substitution of the hydroxyl group with bromine. This reaction can be catalyzed by any of the two reagents: PBr3 or SOCl2.
Transformation 6
The transformation for this reaction is: CH3CH2CH(CH3)Br -> CH3CH2COOH Reagents used:
The reaction is an oxidation reaction that involves the oxidation of alkyl halides to carboxylic acid. This reaction can be catalyzed by any of the two reagents: KMnO4 or HNO3.
Transformation 7
The transformation for this reaction is: CH3CH2CH2OH -> CH3CH2CH(CH3)CH2OH Reagents used:
The reaction is a dehydration reaction that involves the removal of water from the compound. This reaction can be catalyzed by any of the two reagents: H2SO4 or H3PO4.
Transformation 8
The transformation for this reaction is: CH3CH2CH(CH3)CH2OH -> CH3CH2CH2CH2COOH Reagents used:
The reaction is an oxidation reaction that involves the oxidation of the secondary alcohol to carboxylic acid. This reaction can be catalyzed by any of the two reagents: KMnO4 or HNO3.
Transformation 9
The transformation for this reaction is: CH3CH2CH2OH -> CH3COCH3 Reagents used:
The reaction is an oxidation reaction that involves the oxidation of primary alcohol to ketones. This reaction can be catalyzed by any of the two reagents: PCC or CrO3.
Transformation 10
The transformation for this reaction is: CH3COCH3 -> CH3CH2COOH Reagents used:
The reaction is an oxidation reaction that involves the oxidation of the ketone to carboxylic acid. This reaction can be catalyzed by any of the two reagents: KMnO4 or HNO3.
know more about isomerization reaction
https://brainly.com/question/28191756
#SPJ11
What would be the effect on this reaction of increasing the temperature?
2H2 + O2 = 2H20 + energy
A) the rate of formation of H2O would increase
B) The forward reaction would be favored
C) Increasing the temperature would not have an effect on this reaction
D) The rate of the forward reaction would decrease
Answer:
D) The rate of the forward reaction would decrease
Explanation:
The statement that describes effect on the reaction of increasing the temperature is "the rate of the forward reaction would decrease."
What is temperature?Temperature is the measurement of a body's level of hotness or coolness.
The average kinetic energy of the system is measured by temperature. The kinetic energy of particles in a matter raises as they move faster, which boosts the temperature of the system. When two bodies of differing temperatures come into touch, heat is the energy exchanged between them.
The term "exothermic reaction" refers to a reaction that releases energy. An exothermic reaction, in other words, produces heat. The temperature of the reaction will rise unless it is cooled in some way. When you use an external heater to raise the temperature, it slows or reverses the reaction, reducing the number of products while increasing the amount of reactants.
Hence the correct answer is D.
Learn more about temperature here,
https://brainly.com/question/4220478
#SPJ2
A buffer is made with 0.493 M of the weak base methylamine ([tex]CH3NH2[/tex]) with 0.493 M [tex]CH3NH3Cl[/tex] (KA = 5.6 x 10^-4)
What is the pH of this buffer system?
If 0.100 M HBr is added to the buffer, what is the pH?
h^ ar hidrojen oksijen azot helyum
The recipe for Bananas Foster requires 35g of ethanol to be added to the pan. The ethanol starts at room temperature (25°C) and is heated to its boiling point of 78°C. How many Joules of energy are transferred from the stove burner to the ethanol to create this temperature change? Your answer should have the correct number of significant figures. Show all work.
Given: The specific heat of ethanol is 2.46 J/g°C.
Answer:
To calculate the amount of heat released we have equation, use the equation Q = mc ΔT,
where
m= 35g
c= 2.46 J/g°C
ΔT=T2-T1 = 78-25= 53°C
now Q = mcΔT
Q = 35×2.46×53
Q = 4563.3 joule
Conclusion 4563.3 Joules of energy are transferred from the stove burner to the ethanol to create this temperature change!
Which of these are animal adaptations that help animals live in the deciduous forest biome? Select all that apply.
little feet for snow
hibernation
hard outer skin to reduce loss of water
round builds
Answer:
hibernation
hard outer skin to reduce loss of water
Explanation:
I got a few potins for this, but...yeah.
Adaptations that help animals live in the deciduous forest biome hibernation and hard outer skin to reduce loss of water.
What is deciduous forest biomes?A deciduous forest is a type of forest which is dominatred by the trees that lose their leaves seasonally or in the growing season and Earth has dry forests.
Hibernation is a process in which plants or animals adapt themselves in order to survive in the adverse condition to conserve energy. At the same time animals will try to hard their outer skin to reduce the loss of water in the summer season.
Hence correct options are (2) & (3).
To know more about hibernation, visit the below link:
https://brainly.com/question/3047864
One of the following equations is that of a parabola with x-intercepts -5 and +5 in the standard (x, y) coordinate plane. Which equation?
a. y = x² + 25
b. y = (x + 5)(x - 5)
c. y = x(x + 5)(x - 5)
d. y = (x + 5)² - 25
Given that the x-intercepts of the parabola are -5 and 5 and we need to find out which equation from the given options is that of the parabola. Option (b) y = (x + 5)(x - 5)
is the equation of a parabola with x-intercepts -5 and +5 in the standard (x, y) coordinate plane.
We know that the x-intercepts of a parabola are the points at which y is zero.
We have two x-intercepts: x = -5 and x = 5. Let's find which equation is correct.
a. y = x² + 25
For x = -5, we have
y = (-5)² + 25 = 50.
It does not satisfy the equation for the x-intercept of -5.
For x = 5, we have
y = (5)² + 25 = 50.
It does not satisfy the equation for the x-intercept of 5.
b. y = (x + 5)(x - 5)
For x = -5, we have
y = (0) (10) = 0.
This satisfies the equation for the x-intercept of -5.
For x = 5, we have
y = (10) (0) = 0.
This satisfies the equation for the x-intercept of 5.
c. y = x(x + 5)(x - 5)
For x = -5, we have
y = (-5) (0) (10) = 0.
This satisfies the equation for the x-intercept of -5.For x = 5, we have
y = (5) (10) (0) = 0.
This satisfies the equation for the x-intercept of 5.
d. y = (x + 5)² - 25
For x = -5, we have
y = (0) - 25 = -25.
It does not satisfy the equation for the x-intercept of -5.
For x = 5, we have
y = (10) - 25 = -15.
It does not satisfy the equation for the x-intercept of 5.
y = (x + 5)(x - 5)
is the equation of a parabola with x-intercepts -5 and +5 in the standard (x, y) coordinate plane.
Hence, the correct answer is option B.
To know more about x-intercepts visit:
https://brainly.com/question/32051056
#SPJ11
How would potential energy and kinetic energy change going down stairs one at a time or two at a time?(1 point)
A) Going down stairs two at a time means you will get down in fewer steps, which saves you some kinetic and potential energy.
B) If you go down stairs two at a time, then you are going a greater distance, which will decrease your potential energy. Your kinetic energy will be less when you land on the stair.
C) Going down stairs two at a time will give you twice as much kinetic energy by the time you reach the bottom stair.
D)If you go down stairs two at a time, then your potential energy relative to the stair is greater. Your kinetic energy will be greater when you land.
When going down stairs, choosing to go two steps at a time will result in changes to both potential and kinetic energy. Option B is the correct statement as going down two steps at a time increases the distance traveled, leading to a decrease in potential energy, while the landing impact reduces the kinetic energy.
Option B accurately describes the changes in potential and kinetic energy when going down stairs two steps at a time. As you descend two steps at a time, you cover a greater vertical distance compared to going one step at a time. This increase in distance decreases your potential energy since potential energy is directly related to height. With each step, you experience a decrease in potential energy as you get closer to the ground.
However, when you land on the stair after going down two steps, your kinetic energy is reduced. This is because landing involves a sudden stop and impact, which leads to a dissipation of energy. The energy that was initially in the form of kinetic energy gets transferred to other forms, such as sound or heat. As a result, your overall kinetic energy is reduced compared to going down one step at a time, where each landing impact is less forceful.
Therefore, while the potential energy decreases due to the increased distance traveled, the kinetic energy decreases due to the landing impact when going down stairs two steps at a time.
Learn more about energy here: https://brainly.com/question/29763772
#SPJ11
How many liters of oxygen are there in 5 grams of oxygen at STP?
Answer:
The volume of 5.0 g CO2 is 2.6 L CO2 at STP.
Explanation:
hope this helps :)
Which of the following does not cause water pollution?
A
Domestic Waste
B
Insecticides and Herbicides
C
Heavy Metals
D
Dissolved Oxygen
Dissolved Oxygen (option D) does not cause water pollution. It is an essential component of water quality and supports aquatic life.
Water pollution refers to the contamination of water bodies, such as rivers, lakes, and oceans, by harmful substances. While all the options listed are associated with water quality, the one that does not cause water pollution is Dissolved Oxygen (option D).
Dissolved Oxygen refers to the presence of oxygen molecules dissolved in water. It is crucial for the survival of aquatic organisms, as they rely on it for respiration. Adequate levels of dissolved oxygen support healthy ecosystems and biodiversity in aquatic environments.
On the other hand, the remaining options, namely Domestic Waste (option A), Insecticides and Herbicides (option B), and Heavy Metals (option C), can contribute to water pollution. Domestic waste may contain organic matter, pathogens, and chemicals that can contaminate water sources. Insecticides and herbicides are chemical substances used to control pests and weeds, and their runoff into water bodies can harm aquatic organisms. Heavy metals, such as mercury, lead, and cadmium, can accumulate in water and have toxic effects on aquatic life.
learn more about water pollution here; brainly.com/question/27177717
#SPJ11
What is the energy change per gram of ice when an iceberg composed of pure water, cp = 2.06 j/(gk, is heated from -25°c to -15°c?
Answer:
[tex]Q=20.6\frac{J}{g}[/tex]
Explanation:
Hello there!
In this case, according to the equation for the calculation of the heat during a heating process:
[tex]Q=mC(T_f-T_i)[/tex]
It is possible to compute it per gram of ice by just removing m from the equation by dividing at both sides. Next we plug in the given specific heat and the final and initial temperatures to obtain:
[tex]Q=2.06\frac{J}{g\°C}[-15\°C-(-25\°C)] \\\\Q=20.6\frac{J}{g}[/tex]
Best regards!
A beam of electrons, a beam of protons, a beam of helium atoms, and a beam of nitrogen atoms cach moving at the same speed. Which one has the shortest de-Broglie wavelength? A. The beam of nitrogen atoms. B. The beam of protons, C. All will be the same D. The beam of electrons. E the beam of helium atoms
The beam of protons has the shortest de-Broglie wavelength if a beam of electrons, a beam of protons, a beam of helium atoms, and a beam of nitrogen atoms cach moving at the same speed.
Define De Broglie wavelength
The De Broglie wavelength, which is a wavelength present in all quantum mechanically manifested things and establishes the probability density of locating the object at a specific location in the configuration space, is said to be a manifestation of wave-particle duality. A particle's momentum is inversely correlated with its de Broglie wavelength.
For electrons,
λ = h/mv = h/(m * 4*10⁶ m/s) = 3.3 x 10⁻¹¹ m.
For protons,
λ = h/mv = h/(m * 4*10⁶ m/s) = 1.3 x 10⁻¹³ m.
For helium atoms,
λ = h/mv = h/(m * 4*10⁶ m/s) = 1.7 x 10⁻¹¹ m.
For nitrogen atoms,
λ = h/mv = h/(m * 4*10⁶ m/s) = 3.3 x 10⁻¹¹ m.
To learn more about electrons :
https://brainly.com/question/371590
#SPJ4
maksud frasa integrasi nasional
Answer:
Adapun frasa INTEGRASI BANGSA atau INTEGRASI NASIONAL sendiri dimaknai dalam dua konteks yakni POLITIS dan ANTROPOLOGIS. Dalam konteks politis, Integrasi Nasional bermakna sebagai penyatuan berbagai macam kelompok sosial juga budaya ke dalam suatu kesatuan wilayah yang membentuk suatu identitas nasional.
Explanation:
how are the functions of a flower's stamen and pistil related to reproduction?
Answer: the essential parts of a flower
Explanation:
are engaged with seed creation. In the event that a blossom contains both useful stamens and pistils, it is known as an ideal bloom, regardless of whether it doesn't contain petals and sepals. On the off chance that either stamens or pistils are deficient with regards to, the blossom is called imperfect.
Which of the following molecules has a Lewis structure that is not consistent with the octet rule?
A. CFCl3
B. C2F4
C. COF2 (the C is the central atom)
D. XeF2
COF2 has a Lewis structure that is not consistent with the octet rule.
What is the octet rule?The octet rule is a guiding principle in chemistry that represents the notion that elements in the main group of the periodic table tend to form chemical bonds in a way that ensures each atom possesses eight electrons in its outermost electron shell, resembling the electron configuration of a noble gas.
This rule is particularly relevant for carbon, nitrogen, oxygen, and the halogens, although it generally applies to elements found in the s-block and p-block of the periodic table. Other principles govern the behavior of different elements, such as the duplet rule which applies to hydrogen and helium, or the 18-electron rule that pertains to transition metals.
Learn about Lewis structure here https://brainly.com/question/28353159
#SPJ4
In scenario C, visible light is in the middle of the yellow region of the visible spectrum. Estimate its wavelength, frequency, and energy per photon. frequency: S-1 Incorrect In scenario D, visible light has a photon energy of 4.160 x 10-19 J. Determine its wavelength, frequency, and color. frequency: Incorrect S-1 wavelength: Incorrect energy per photon: wavelength: Incorrect The visible light in scenario D is Incorrect blue. nm nm In scenario C, visible light is in the middle of the yellow region of the visible spectrum. Estimate its wavelength, frequency, and energy per photon. frequency: S-1 Incorrect In scenario D, visible light has a photon energy of 4.160 x 10-19 J. Determine its wavelength, frequency, and color. frequency: Incorrect S-1 wavelength: Incorrect energy per photon: wavelength: Incorrect The visible light in scenario D is Incorrect blue. nm nm
Scenario C: Visible light is in the middle of the yellow region of the visible spectrum. Here, we have to estimate its wavelength, frequency, and energy per photon. The wavelength of visible light in the middle of the yellow region of the visible spectrum is approximately 575 nm.
The frequency of the given light can be calculated by using the formula c = νλ where ν is the frequency of light, λ is the wavelength of light, and c is the speed of light. Hence the frequency is given by,ν = c / λν = 3.0 x 10^8 m/s / 575 x 10^-9 mν = 5.22 x 10^14 Hz. To calculate the energy per photon, we use the formula E = hc/λ where h is Planck's constant and c is the speed of light. E = hc/λE = (6.63 x 10^-34 J s) x (3.0 x 10^8 m/s) / (575 x 10^-9 m)E = 3.45 x 10^-19 J per photon.
Scenario D: Visible light has a photon energy of 4.160 x 10^-19 J. Here, we have to determine its wavelength, frequency, and colour. We can use the formula E = hc/λ to find the wavelength of light, where E is the energy of the photon. λ = hc/Let's substitute the given values.λ = (6.63 x 10^-34 J s) (3.0 x 10^8 m/s) / 4.160 x 10^-19 Jλ = 4.8 x 10^-7 m.
The frequency of light can be calculated using the formula c = νλ, where c is the speed of light.ν = c / λν = 3.0 x 10^8 m/s / 4.8 x 10^-7 mν = 6.25 x 10^14 Hz.
To determine the colour of visible light, we can use a chart that maps wavelength to colour. From the chart, it can be seen that the visible light of wavelength 480 nm is blue. Therefore, the visible light in scenario D is blue.
know more about wavelength,
https://brainly.com/question/31143857
#SPJ11
Which of the gases below are primarily obtained from the atmosphere? obtained from Atmosphere Drag the correct choices into the box. Leave the incorrect choices outside of the box. helium hydrogen nitrogen oxygen argon chlorine
Helium, hydrogen, and chlorine are obtained from sources other than the atmosphere. The gases primarily obtained from the atmosphere are nitrogen, oxygen, and argon.
Nitrogen, oxygen, and argon are the main components of Earth's atmosphere and are commonly obtained from the air. They exist in significant quantities in the atmosphere and are often extracted for various industrial and commercial purposes.
On the other hand, helium, hydrogen, and chlorine are not primarily obtained from the atmosphere. Helium is typically extracted from natural gas wells, hydrogen is usually produced from fossil fuels or electrolysis of water, and chlorine is obtained through chemical processes such as electrolysis or from chloride-containing compounds.
The gases primarily obtained from the atmosphere are nitrogen, oxygen, and argon. Helium, hydrogen, and chlorine are obtained from sources other than the atmosphere.
To know more about atmosphere, visit:
https://brainly.com/question/921955
#SPJ11
two similar solids have a scale factor of 6:7. what is ratio of their volumes expressed in lowest terms? enter your answer by filling in the boxes. :
The ratio of the volumes of the two similar solids, expressed in the lowest terms, is 216:343.
To find the ratio of the volumes of two similar solids with a scale factor of 6:7, we can use the fact that the ratio of the volumes of similar solids is equal to the cube of the scale factor.
The ratio of the volumes of the two similar solids can be expressed as (6/7)³.
To simplify this ratio to its lowest terms, we can cube the numerator and denominator separately.
(6/7)³ = (6³)/(7³) = 216/343
Therefore, the ratio of the volumes of the two similar solids, expressed in lowest terms, is 216:343.
To know more about volume
https://brainly.com/question/29796637
#SPJ11
All matter has:
volume
mass
density
all of the above
18) What is the following number representing: 10m/s West *
3 points
Force
Acceleration
Mass
Area
Pressure
Velocity
Speed
Impulse
Momentum
Speed
Explanation:
The distance travelled by a body per unit time
describe the relationship between the mole information of a substance and its chemical formula
The mole information of a substance is directly related to its chemical formula. The coefficients in a balanced chemical equation represent the mole ratios between the reactants and products.
The chemical formula of a substance provides information about the types and numbers of atoms present in a molecule or formula unit. It serves as a concise representation of the composition of the substance.
For example, consider the balanced equation for the combustion of methane with oxygen:
[tex]CH_4 + 2O_2[/tex] →[tex]CO_2 + 2H_2O[/tex]
From this equation, we can determine that one mole of methane reacts with two moles of oxygen to produce one mole of carbon dioxide and two moles of water. The coefficients (1, 2, 1, and 2) indicate the mole ratios between the reactants and products.
The mole information provided by the chemical formula and the coefficients in a balanced chemical equation allow us to determine the stoichiometry of a reaction, including the number of moles of each substance involved. This relationship between the mole information and the chemical formula is essential for performing stoichiometric calculations and understanding the quantitative aspects of chemical reactions.
Learn more about stoichiometry here:
https://brainly.com/question/28780091
#SPJ11
calculate the molar solubility of aluminum hydroxide. al(oh)3. The Ksp = 2.0 x 10-32
The molar solubility of aluminum hydroxide, Al(OH)₃, in a 0.015 M solution of aluminum nitrate, Al(NO₃)₃, is approximately 3.67x10⁻¹¹ M. Option A is correct.
To calculate molar solubility of aluminum hydroxide (Al(OH)₃) in a solution of aluminum nitrate (Al(NO₃)₃), we will consider the common ion effect. Aluminum nitrate is a source of aluminum ions (Al³⁺), which will affect the solubility of aluminum hydroxide.
Balanced equation for the dissociation of aluminum hydroxide will be;
Al(OH)³(s) ⇌ Al³⁺(aq) + 3OH⁻(aq)
In the presence of aluminum nitrate, the aluminum ions from Al(NO₃)₃ will react with the hydroxide ions, reducing the amount of hydroxide ions available for the dissociation of aluminum hydroxide.
Let's assume the molar solubility of aluminum hydroxide in the presence of aluminum nitrate is represented by "s". The concentration of aluminum ions (Al³⁺) from aluminum nitrate is 0.015 M.
The equilibrium expression for the dissociation of aluminum hydroxide is:
Ksp = [Al³⁺][OH⁻]³
Considering the common ion effect, the concentration of hydroxide ions can be expressed as (s - 3x), where "x" represents the decrease in hydroxide ion concentration due to the reaction with aluminum ions.
Substituting the concentrations into the equilibrium expression, we have:
2x10⁻³² = (0.015)(s - 3x)³
Simplifying and neglecting the small contribution of 3x compared to s, the equation becomes;
2x10⁻³² ≈ 0.015s³
To solve for "s," we can rearrange the equation and solve for the cube root:
s ≈ (2x10⁻³² / 0.015[tex])^{(1/3)}[/tex]
Calculating this expression gives us the molar solubility of aluminum hydroxide in the presence of aluminum nitrate;
s ≈ 3.67x10⁻¹¹ M
Hence, A. is the correct option.
To know more about molar solubility here
https://brainly.com/question/31488311
#SPJ4
--The given question is incomplete, the complete question is
"Calculate the molar solubility of aluminum hydroxide, Al(OH)₃, in a 0.015M solution of aluminum nitrate, Al(NO₃)₃. The Ksp of Al(OH)₃ is 2x10⁻³² A) 3.67x10⁻¹¹ M B) 5x10⁻⁸ M C) 3x10⁻¹⁵ M D) 7x10⁻¹² M."--
Why are different detergents made for cleaning different surfaces and how their chemical structure/composition affects this?
Answer: This is because of the different chemical composition of the types of detergents affects their cleansing actions.
Explanation:
Detergent means any substance which has the ability to clean an object. This includes soaps, soap powers and dish washing liquids as well as water. Detergents fall into two main types
--> Soapy detergents and
--> Soapless detergents
Soapy detergents are sodium salts of fatty acids. They are saponification products of fats and oils. In the chemical composition, each molecule of soap possesses a long hydrocarbon chain attached to an ionic head. The hydrocarbon tail is hydrophobic, so it is insoluble in water but soluble in oil and organic solvents. The ionic head is hydrophilic, so it is soluble in water. Due to this dual nature, when is dissolved in water, the soap molecule forms spherical clusters called MICELLES( hydrocarbon tails points inward and ionic heads point outward). Repulsion between the similarly charged ionic heads keeps the micelles apart. This property helps the soapy detergent to lift grease from grease coated fabrics when applied to it.
While the chemical properties of the Soapless detergents has a hydrophobic tail and a hydrophilic head. The hydrophobic tail is either a long chain hydrocarbon or a benzene ring with a long alkyl group attached. The hydrophilic head, unlike the Soapy detergents, can be positively or negatively charged or even neutral. These chemical properties makes it to have a more favourable and wider application than soapy detergent.it is suitable for washing acid - sensitive fabrics and for breaking up oil slicks.
Will mark brainliest!!
Answer:
I think its B im not sure
but i hope this helps
which gas has the same density at 316 degrees and 1.50 atm that o2 gas has at 0 degrees and 1 atm?
a. SO2
b. N2
c. NO2
d. CO2
e. Cl2
The gas that has the same density at 316 degrees and 1.50 atm as oxygen (O2) gas at 0 degrees and 1 atm is (d) carbon dioxide (CO2). The solution to this problem requires knowledge of the combined gas law, which is given as: (P1V1/T1) = (P2V2/T2).
Where P = pressure, V = volume, and T = temperature in Kelvin (K).Oxygen (O2) gas at 0 degrees Celsius and 1 atm has a density of 1.429 g/L. The temperature and pressure can be converted to Kelvin and atm, respectively as:0 degrees Celsius = 273 K1 atm = 1.01325 barUsing these values, we can calculate the volume of O2 gas at the given conditions as follows:(1 atm * V) / (273 K) = (1.429 g/L)(1 atm * V) = (1.429 g/L) * (273 K)V = 0.0539 LAt 316 degrees Celsius and 1.50 atm, the density of carbon dioxide (CO2) is also 1.429 g/L. Therefore, using the combined gas law, we can calculate the volume of CO2 gas at these conditions as follows:(1.50 atm * V) / (589 K) = (1.429 g/L)(1.50 atm * V) = (1.429 g/L) * (589 K)V = 0.0494 LThis volume corresponds to the same density of O2 gas at 0 degrees Celsius and 1 atm. Therefore, the answer is (d) carbon dioxide (CO2).
To know more about gas visit:
https://brainly.com/question/31778762
#SPJ11