Answer:
A metalloid is a chemical element that exhibits some properties of metals and some of nonmetals.The closer you get to the zone, the more blurred the properties become. Metalloids tend to be semiconductors; silicon is the best known example of a semiconductor. Most microchips and microprocessors are made with silicon.
Explanation:
That is what i know on the answer
To solve this we must be knowing each and every concept related to metalloid. Therefore, in above given ways semiconductor can be defined.
What is metalloid?Metalloids are chemical elements with physical and chemical characteristics that fall between between metal and nonmetal.
A metalloid is indeed a chemical element with characteristics of both metals and nonmetals. The properties grow increasingly blurred as you move closer to the zone. The seven most well-known metalloids are boron, germanium, silicon, antimony, arsenic, tellurium, and polonium.
Metalloids are often semiconductors, with silicon being the most well-known example. Silicon is used to make the majority of microchips and microprocessors.
Therefore, in above given ways semiconductor can be defined.
To know more about metalloid, here:
https://brainly.com/question/2548493
#SPJ2
Can light bend around corners to reach an object
Answer: Yes, light can bend around corners. In fact, light always bends around corners to some extent.
Explanation:This is a basic property of light and all other waves. ... The ability of light to bend around corners is also known as "diffraction".
The local weather station is predicting that a warm front will pass through Charlotte, NC in two days.
How will Charlotte's weather most likely be affected by the passing of a warm front?
A The wind speed will decrease.
B The air pressure will increase.
C the temperature will increase.
D The temperature will decrease.
Answer:
C the temperature will increase.
When P4O10(s) reacts with H2O(l) to form H3PO4(aq) , 453 kJ of energy are evolved for each mole of P4O10(s) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation.
Answer:
P4O10 + 6H2O → 4H3PO4 ΔH = 453 kJ
Explanation:
A thermochemical reaction is one in which the amount of heat gained/evolved is written as part of the reaction equation.
A thermochemical equation helps us to judge whether an equation is endothermic or exothermic. For an endothermic reaction, ΔH is positive while for an exothermic reaction ΔH is negative.
Since, the reaction of one mole of P4O10(s) with H2O(l) to form H3PO4(aq) evolves 453 kJ of energy for each mole of P4O10(s) that reacts. Then we can write;
P4O10 + 6H2O → 4H3PO4 ΔH = 453 kJ
why phenol is more acid than alcohol????
Answer:
Phenol is more acidic than alcohol due to resonance stabilization of the phenoxide ion.
Which equation is an example of a redox reaction?
A. Ca(OH)2 + H2SO3 + 2H20 + CaSO3
B. HCI + KOH + KCI + H20
C. 2K+ CaBr +2KBr + Ca
D. BaCl2 + Na2SO4 + 2NaCl + BaSO4
Answer:
The answer is C.
Explanation:
A P E X approved :)
A balloon at 30.0 C has a volume of 222 ml. if the temperature is increased to 62.1 C and the pressure remains constant, what will the new volume be, in mL?
The concept Charles's law is used here to determine the new volume. At the condition of constant pressure the new volume of the balloon is 459.54 mL.
What is Charles's law?At constant pressure, the volume of a given mass of gas is directly proportional to the temperature on Kelvin scale. Mathematically, the law can be expressed as follows:
V = constant × Temperature
V / T = Constant
V = Volume
T = Temperature
The Charles's law also explained that at -273°C, the volume of all the gases will become zero. This temperature is defined as the absolute zero.
For two different gases with volumes V₁ and V₂ and temperatures T₁ and T₂ is represented as:
V₁ / T₁ = V₂ / T₂
V₂ = V₁T₂ / T₁
222 × 62.1 / 30.0 = 459.54 mL
Thus the new volume of balloon is 459.54 mL.
To know more about Charles's law, visit;
https://brainly.com/question/16927784
#SPJ2
A student dissolves 15.0 g of ammonium chloride(NH4Cl) in 250. 0 g of water in a well-insulated open cup. She then observes the temperature of the water fall from 20.0 oC to 16.0 oC over the course of minutes. Use this data, and any information you need from the ALEKS Data resource, to answer the questions below about this reaction:
NH4Cl(s) rightarrow NH4+(aq) + Cl-(aq)
You can make any reasonable assumptions about the physical properties of the solution. Note for advanced students: it's possible the student did not do the experiment carefully, and the values you calculate may not be the same as the known and published values for this reaction.
1. Is this reaction exothermic, endothermic, or neither?
2. If you said the reaction was exothermic or endothermic, calculate the amount of heat that was released or absorbed by the reaction in this case.
3. Calculate the reaction enthalpy deltaHrxn per mole of NH4CI.
Answer:
1) Endothermic.
2) [tex]Q_{rxn}=4435.04J[/tex]
3) [tex]\Delta _rH=15.8kJ/mol[/tex]
Explanation:
Hello there!
1) In this case, for these calorimetry problems, we can realize that since the temperature decreases the reaction is endothermic because it is absorbing heat from the solution, that is why the temperature goes from 22.00 °C to 16.0°C.
2) Now, for the total heat released by the reaction, we first need to assume that all of it is released by the solution since it is possible to assume that the calorimeter is perfectly isolated. In such a way, it is also valid to assume that the specific heat of the solution is 4.184 J/(g°C) as it is mostly water, therefore, the heat released by the reaction is:
[tex]Q_{rxn}=-(15.0g+250.0g)*4.184\frac{J}{g\°C}(16.0-20.0)\°C\\\\ Q_{rxn}=4435.04J[/tex]
3) Finally, since the enthalpy of reaction is calculated by dividing the heat released by the reaction over the moles of the solute, in this case NH4Cl, we proceed as follows:
[tex]\Delta _rH=\frac{ Q_{rxn}}{n}\\\\\Delta _rH= \frac{ 4435.04J}{15.0g*\frac{1mol}{53.49g} } *\frac{1kJ}{1000J} \\\\\Delta _rH=15.8kJ/mol[/tex]
Best regards!
Best regards!
What happened on March 15 in the year 44 B.C.? Caesar began a civil war. Caesar's enemies killed him. C. The Council of the Plebs met. d. All enslaved people were freed. Please select the best answer from the choices provided Com o C
Answer:
Caesar's enemies killed him.
Explanation:
On March 15, 44 B.C.E., Julius Caesar was stabbed to death in Rome, Italy. . A group of as many as 60 conspirators decided to assassinate Caesar at the meeting of the Senate on March 15, the ides of March.
Hope this helped!!!
. Give an example of a salt that is less soluble when the temperature increases
Answer:
cerium (iii) sulfate is less soluble
Answer:
cerium sulphate is less solube when the temperature increase
Dominant traits are more common in a population then recessive traits
false
true
Answer:
No Just because a trait is dominant does not mean that it is present in the population
Explanation:
how do you think a device could change the sound that we hear? Make sure you use vocabulary such as frequency, energy and amplitude
Answer:
good luck tho
Explanation:
Hydrogen chloride dissolved in water yields hydrochloric acid. What is the
molar concentration of HCl if 3.65 g of hydrogen chloride is dissolved in 500 mL of
water?
Answer:
1500ml
Explanation:
molarity=3.65⋅g36.5⋅g⋅mol−1500⋅mL×10−3⋅L⋅mL−1=0.200⋅mol⋅L−1
How many significant figures are in the number 420,000 mi?
Answer:
2
Explanation:
zeros are not considered sig figs
Why isn't salt water safe for humans to drink?
O A. Salt water has too many water molecules and too few salt molecules.
B. Salt water has too few water molecules and too many salt molecules.
O
C. Salt water contains molecules that are poisonous to humans.
O
D. Salt water contains molecules that are too large for humans to process.
Answer:
B. Salt water has too few water molecules and too many salt molecules
Explanation:
Seawater is toxic to humans because your body is unable to get rid of the salt that comes from seawater. Your body normally gets rid of excess salt by having the kidneys produce urine, but it needs freshwater to dilute the salt in your body for the kidneys to work properly.
About how many atoms of Mg are present in 24.3 grams of Mg?
5.85 x 1025
4.35 x 1019
c
4.81 X 1024
6.02 x 103
Answer:
D is the answer i think
Explanation:
is copper II nitrate binary or ternary
Answer:
Ternary
Explanation:
A ternary ionic compound is an ionic compound composed of three or more elements. Copper II Nitrate is a ionic compound and contains 3 elements thus making it Ternary
Why do scorpions glow on a black light?
Answer:
All scorpions fluoresce under ultraviolet light, such as an electric black light or natural moonlight. The blue-green glow comes from a substance found in the hyaline layer, a very thin but super tough coating in a part of the scorpion's exoskeleton called the cuticle
Explanation:
Answer:
All scorpions fluoresce under ultraviolet light, such as an electric black light or natural moonlight. Much like many other creepy, crawly insects, scorpions like hiding in dark places. ... If you're worried that you may have a scorpion problem, you can use a black light to search for them at night. When a black light hits a scorpion, the proteins on its exoskeleton create a bright neon blue hue.Scorpions do not like heat and bright light. They lose some of what little water they have to evaporation. So they use their sensitivity to UV rays to determine if it's dim enough for them to crawl out and get to business. He thinks that scorpions glow to convert the dim UV light from the moon and the stars into the colour that they see best – blue-green. This could explain why scorpion eyes are so exquisitely sensitive, to the point where they can detect the faint glow of starlight against the background of the night sky.Given the high densities of scorpions in some areas, their importance in ecological food webs, particularly with respect to helping control insect populations, is considerable. Many are sensitive to environmental degradation and are considered equilibrium species. Ecology: Scorpions are primarily nocturnal.Scorpions are preyed upon by large centipedes, tarantulas, lizards, birds (especially owls), and mammals such as bats, shrews, and grasshopper mice.
Explanation: I added a little more info about them please give me brainliest
Wind energy is a renewable natural resource
True
False
this is true, wind energy is a renewable natural resource c:
What do particulates in the atmosphere do?
A: They trap heat
B: They help plants to grow better
C: They shield Earth's surface from harmful solar radiation
D: They nucleate water vapor to form clouds.
Potential and kinetic energy are similar in that -
COME ON BESTIES I NEED HELP
Answer:
They refer to energy that moves. Kinetic energy is energy that is currently moving. Potential refers to energy that has yet to move, or simply energy in wait
Explanation:
Answer:
I'm not 100% but a possible answer could be: No energy could either be created or destroyed
LMK if not but good luck!
5 ways light changes objects
What is a biome?
Question 1 options:
An area with lots of of rainfall.
An area with the same climate, landscape, plants, and animals.
An area with different temperatures.
A bunch of trees, forests, and rivers.
Answer:
An area with the same climate, landscape, plants, and animals.
what volume of 1.75 h2so4 would be needed to neutralize 350 ml of 3.33 m sodium hydroxide?
Answer:
1.332 L
Explanation:
The reaction that takes place is:
H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂OFirst we calculate the number of NaOH moles, using the given volume and concentration:
350 mL * 3.33 M = 1165.5 mmol NaOHThen we convert NaOH moles into H₂SO₄ moles, using the stoichiometric coefficients:
1165.5 mmol NaOH * [tex]\frac{2mmolH_2SO_4}{1mmolNaOH}[/tex] = 2331 mmol H₂SO₄Finally we calculate the required volume of a 1.75 M solution of H₂SO₄, using the concentration and number of moles:
2331 mmol / 1.75 M = 1332 mLWe can convert mL into L:
1332 mL / 1000 = 1.332 LWhich of the following methods of fossil formation is formed in dry areas due to a lack of moisture?
a
Mummification
b
Casts and molds
c
Amber fossil
d
Carbonization
The methods of fossil formation in dry areas due to a lack of moisture is mummification. The correct option is a.
What is mummification?Mummification is the process of deliberately drying or embalming flesh to preserve the body after death.
This typically entailed removing moisture from a deceased body and desiccating the flesh and organs with chemicals or natural preservatives such as resin.
Mummification served the purpose of keeping the body intact so that it could be transported to a spiritual afterlife.
The body was stripped, positioned on a slanted table, and washed in natron solution (a naturally occurring salt used both as soap and a preservative).
The brain was extracted from the skull through a hole in the ethmoid bone (the bone separating the nasal cavity from the skull cavity).
Thus, the correct option is A.
For more details regarding mummification, visit:
https://brainly.com/question/899330
#SPJ2
2. What mass of NaOH is contained in 250.0 mL of a 0.400
M sodium hydroxide solution?
Answer:Explanation:
250.ml of a 0.400 divide
how many ions does magnesium phosphite have? how many of those are anions? please explain thought process.
Answer:
We can simply refer to the cation in the ionic compound as magnesium. Phosphorus, Pstart text, P, end text, is a group 15 element and therefore forms 3- anions.
Explanation:
Because it is an anion, we add the suffix -ide to its name to get phosphide as the name of the ion.
Help meee??
HNO 3 is an example of Select one :
Triprotic Acid
O Diprotic Acid
O Monoprotic Acid
Tetraprotic Acid
Which sublevels hold valence electrons?
Answer:
The Periodic Table can be divided into s, d, p, and f sublevel blocks. For elements in the s sublevel block, all valence electrons are found in s orbitals. For elements in the p sublevel block, the highest energy valence electrons are found in p orbitals.
Explanation:
Titrations provide a method of quantitatively measuring the concentration of an unknown solution.
a. Trueb. False
Answer: True
Explanation:
Titration is a quantitative technique where a solution of known concentration is used to determine the concentration of an unknown solution. The titrant (the known solution) is added from a burette to a known quantity of the the unknown solution until the reaction is complete.
By knowing the volume of titrant, we can determine the concentration of the unknown.
Thus the statement Titrations provide a method of quantitatively measuring the concentration of an unknown solution is True .
What type of intermolecular forces occur between 2 oil molecules?
Answer:
The three main kinds of intermolecular interactions are dipole-dipole interactions, London dispersion forces, and hydrogen bonds
Explanation: