How to multiply fractions

The appropriate test to determine the association between gender and stress level at work is the Chi-Square test for independence.

The Chi-Square test for independence is used when we have categorical variables and want to determine if there is an association or relationship between them. In this case, the variables are gender (male or female) and stress level at work (not at all, somewhat, very).

The test will help us determine if there is a significant association between gender and stress level at work, or if any observed differences are due to chance.

To perform the Chi-Square test, we first need to organize the data into a contingency table, which shows the frequencies or counts of each combination of gender and stress level. We then calculate the expected frequencies under the assumption of independence between the variables.

The Chi-Square test statistic is calculated by comparing the observed and expected frequencies. Finally, we compare the test statistic to the critical value from the Chi-Square distribution with the appropriate degrees of freedom to determine if the association is statistically significant.

In summary, to determine if there is an association between gender and stress level at work, the appropriate test is the Chi-Square test for independence. This test will help us understand if there is a significant relationship between these variables or if any observed differences are due to chance.

To know more about the Chi-Square test refer here:

https://brainly.com/question/28348441#

#SPJ11

Answer:

1. False

Sketch pads ordered: 10(90/3) = 10×30 = 300

2. True

Painting jars ordered: 8(90/5) = 8×18 = 144

3. True

(25×12)/(12×12) = 300/144

or

25/12 = 300/144 = 2.083..

4. False

Since the previous statement isn't 5:4 and it's true, then this statement is false.

2- y= -5

3-  y= 2x

4- y= -4

5- y= 6x,,, 60

6-   -4,,,,,,,,,   36

The statement "There are 68% data values within μ and μ+σ" is true. (option b).

The empirical rule states that approximately 68% of data values in a normal distribution lie within one standard deviation (σ) of the mean (μ). This means that if we consider the interval from μ to μ+σ, it will contain roughly 68% of the data values.

In summary, among the given statements, only statement b) is true. The empirical rule helps us understand the distribution of data values based on their distance from the mean (μ) in a normal distribution. It is important to remember that the rule provides approximate percentages and does not provide precise values for specific intervals.

To know more about normal distribution here

https://brainly.com/question/31226766

#SPJ4

Complete Question:

Which of the following statement(s) is/are TRUE about the number of data values that lie over an interval for normal distribution by using the empirical rule?

a) There are 71.5% data values within μ-σ and μ+20.

b) There are 68% data values within μ and μ+σ.

c) There are 50% data values within μ and ∞.

d) There are 50% data values within µ - 30 and μ.

e) There are 100% data values within μ-30 and μ+30.

This is an example of a reflection.

Answer:

y=30x+25

Step-by-step explanation:

y=mx+b (slope-intercept formula)

y= amount of money per hour of labor

m= 30 (amount per hour, slope)

b= 25 (y-intercept, starting rate)

P(x < 1) = 0.082085.

The given parameters are μ and x. The mean and variance of the Poisson distribution are μ and σ^2 = μ.The probability that the random variable X takes on the value x is given by P(x).P(x=1) when μ = 3.5

Here, x = 1 and μ = 3.5Plug in the given values in the Poisson distribution,

P(x = 1) = ((e^-3.5) (3.5^1))/1!P(x = 1) = ((0.0301974) (3.5))/1!P(x = 1) = 0.105691(1)P(x = 1) = 0.105691

Thus, P(x=1) = 0.105691.P(x ≤ 9)when μ = 6. The given parameters are μ and x. The mean and variance of the Poisson distribution are μ and σ^2 = μ.

P(x ≤ 9) when μ = 6. Here, x ≤ 9 and μ = 6

Using the Poisson formula:

P(x ≤ 9) = Σ P(x = i) for i = 0 to 9.P(x ≤ 9) = Σ P(x = i) for i = 0 to 9.P(x ≤ 9) = Σ ((e^-6)(6^i))/i! for i = 0 to 9P(x ≤ 9) = 0.091578So,

P(x ≤ 9) = 0.091578P(x > 2) when μ = 3.The mean and variance of the Poisson distribution are μ and σ^2 = μ.P(x > 2) when μ = 3:Here, x > 2 and μ = 3

Using the Poisson formula:

P(x > 2) = Σ P(x = i) for i = 3 to infinityP(x > 2) = Σ ((e^-3) (3^i))/i! for i = 3 to infinityP(x > 2) = 1 - P(x ≤ 2)P(x > 2) = 1 - ((e^-3)(3^0))/0! + ((e^-3) (3^1))/1! + ((e^-3) (3^2))/2!P(x > 2) = 1 - ((0.04978706836)(1))/1 + ((0.04978706836)(3))/1 + ((0.04978706836)(9))/2P(x > 2) = 1 - (0.04978706836 + 0.1493612051 + 0.2240418077)P(x > 2) = 0.5768099198So, P(x > 2) = 0.5768099198.P(x < 1) when μ = 2.5.

The given parameters are μ and x. The mean and variance of the Poisson distribution are μ and σ^2 = μ.P(x < 1) when μ = 2.5:Here, x < 1 and μ = 2.5

Using the Poisson formula:

P(x < 1) = P(x = 0)P(x < 1) = ((e^-2.5) (2.5^0))/0!P(x < 1) = 0.082085P(x < 1) = 0.082085Thus, P(x < 1) = 0.082085.

To know more about Poisson formula, visit:

https://brainly.com/question/31967309

#SPJ11

Given that X is a random variable having a Poisson distribution, the probability mass function of X is [tex]P(x)=((e^{-\mu})(\mu^{x}))/x![/tex],

x=0,1,2,…

Here, μ is the mean or the expected value of the distribution.

a) P(x=1) when μ=3.5 is 0.1288 (approx.)

b) P(x≤9) when μ=6 is 0.99988 (approx.)

c) P(x>2) when μ=3 is 0.5766 (approx.)

d) P(x<1) when μ=2.5 is 0.0821 (approx.).

Compute the following:

a) P(x=1) when μ=3.5

Calculate probability for random variable by using the probability mass function of X as follows:

[tex]P(x=1)=((e^{-3.5})(3.5^{1}))/1![/tex]

=0.1288 (approx.)

b) P(x≤9) when μ=6

Calculate, [tex]P(x\leq9)= \sum P(x=k)[/tex] from

k=0 to

[tex]9= \sum ((e^{-6})(6^{k}))/k![/tex] from

k=0 to

9=0.99988 (approx.)

c) P(x>2) when μ=3

We are given μ=3. Then,

P(x>2)= 1- P(x≤2)

= 1- (P(x=0)+P(x=1)+P(x=2))

[tex]= 1- (((e^{-3})(3^{0}))/0!+((e^{-3})(3^{1}))/1!+((e^{-3})(3^{2}))/2!)[/tex]

= 0.5766 (approx.)

d) P(x<1) when μ=2.5

Then, P(x<1)=

P(x=0)

[tex]= ((e^{-2.5})(2.5^0))/0![/tex]

= 0.0821 (approx.)

To know more about probability visit

https://brainly.com/question/32004014

#SPJ11

There are 210 ways to choose a president, vice president, and treasurer for a 7-member club, with no person holding more than one office. Each position can be filled by a different member, resulting in 210 unique combinations.

To determine the number of ways to choose the three positions, we can use the concept of permutations. The president can be selected from the 7 members in 7 different ways. Once the president is chosen, there are 6 remaining members to choose from for the position of vice president. Therefore, there are 6 choices for the vice president. Finally, the treasurer can be chosen from the remaining 5 members.

To calculate the total number of ways, we multiply the number of choices for each position:

7 * 6 * 5 = 210.

Hence, there are 210 ways to choose a president, vice president, and treasurer from a 7-member club, with the condition that no person can hold more than one office.

In summary, the answer is that there are 210 ways to select the president, vice president, and treasurer for the 7-member club, with each member occupying only one position.

To learn more about permutations, visit:

https://brainly.com/question/1216161

#SPJ11

The number of ways seven books can be arranged on a shelf if there are no restrictions is 7! = 5040.Why? As there are no restrictions, any of the seven books can occupy any of the seven places on the shelf. Therefore, there are 7 ways to place the first book. After the first book has been placed, there are 6 ways to place the second book (as one place is now occupied).Then, after the first and second books have been placed, there are 5 ways to place the third book (since two places are now occupied). Similarly, there are 4 ways to place the fourth book after the first four have been placed. There are 3 ways to place the fifth book after the first five have been placed.

There are 2 ways to place the sixth book after the first six have been placed. There is only one way to place the last book after the first six have been placed.

So, using the Multiplication Principle, the number of ways 7 books can be arranged on a shelf is:7 × 6 × 5 × 4 × 3 × 2 × 1 = 5040.

To know more about Multiplication Principle, click here:

https://brainly.com/question/17514196

#SPJ11

Answer:

28

Step-by-step explanation:

if (AB and DC) parallels lines than the equation is alternate interior and therefore congruent to each other

To determine whether set H is a subspace of R², we need to check if H satisfies the three requirements for a subspace: closure under addition, closure under scalar multiplication, and contains the zero vector.

To determine if set H is a subspace of R², we need to check if it satisfies the three properties of a subspace.

Closure under addition: For any two vectors u and v in H, their sum u + v should also be in H. If the lines forming the boundary of H extend infinitely, then any two vectors u and v in H can be added to form a vector that lies within H. Thus, H is closed under addition.

Closure under scalar multiplication: For any vector u in H and any scalar c, the scalar multiple cu should also be in H. Similarly to the closure under addition, if the lines forming the boundary of H extend infinitely, then any vector u in H can be multiplied by a scalar to obtain a vector that lies within H. Hence, H is closed under scalar multiplication.

Contains the zero vector: The zero vector (0, 0) is part of R² and is also part of H since it lies within the boundary of H.

Since H satisfies all three requirements, it is a subspace of R².

Learn more about zero vector here:

https://brainly.com/question/13595001

#SPJ11

Answer:

9/20

Step-by-step explanation:

Answer:

The answer is 5/8

Step-by-step explanation:

Task 1.1 To calculate the product moment correlation coefficient, first we need to find the means of both data sets. The mean of the time is:

$$\bar{t} = \frac {20+22+24+25+27+28+29+31}{8} = 25.25$$

The mean of the number is: $$\bar{n} = \frac {1+3+4+4+2+4+3+3}{8} = 3$$Next, we need to find the standard deviation of both data sets.

We will use the following formulas: $$s_t = \sqrt {\frac {\sum (t - \bar{t2} {n-1}} $$$$s_n = \sqrt{\frac {\sum (n - \bar{n2} {n-1}} $$

Using these formulas, we find that the standard deviation of the time is approximately 4.172 and the standard deviation of the number is approximately 1.247.

Using the following formula to calculate the product moment correlation coefficient:

$r = \frac{\sum (t - \bar{t})(n - \bar{n})}{(n - 1)s_t s_n}$$r = \frac{(20-25.25)(1-3)+(22-25.25)(3-3)+(24-25.25)(4-3)+(25-25.25)(4-3)+(27-25.25)(2-3)+(28-25.25)(4-3)+(29-25.25)(3-3)+(31-25.25)(3-3)}{7(4.172)(1.247)}$$r = \frac{-7.5+1.5-1.245-0.25+2.205+1.215+3.465+2.995}{35.531} \approx. 0.521$

Therefore, the product moment correlation coefficient is approximately 0.521.

Task 1.2 The equation of the least squares regression line of the number of components on time can be found using the following formulas: $$b = \frac {\sum (t - \bar{t}) (n - \bar{n})} {\sum (t - \bar{t}) ^2} $$$$a = \bar{n} - b \bar{t}$$

Using these formulas, we find that: $$b = \frac{(20-25.25)(1-3)+(22-25.25)(3-3)+(24-25.25)(4-3)+(25-25.25)(4-3)+(27-25.25)(2-3)+(28-25.25)(4-3)+(29-25.25)(3-3)+(31-25.25)(3-3)}{\sum (t - \bar{t})^2}$$$$b \approx. -0.235$$$$a = \bar{n} - b \bar{t}$$$$a \approx. 8.439$$

Therefore, the equation of the least squares regression line of the number of components on time is: $$n = 8.439 - 0.235t$$

Task 1.3Using the equation of the least squares regression line, we can predict the number of components for an inspection time of 26 seconds. $$n = 8.439 - 0.235t$$$$n = 8.439 - 0.235(26) $$$$n \approx. 2.974$$

Therefore, we predict that the number of components for an inspection time of 26 seconds is approximately 2.974.

Task 1.4 To test the hypothesis that the inspection time should be the same for all outsourced components, we can use a one-way ANOVA test. We can set up the null hypothesis as follows: H0: μ1 = μ2 = μ3 = μ4 = μ5 = μ6 = μ7 = μ8where μi is the mean inspection time for the ith group of components, and the alternative hypothesis as follows: Ha: At least one mean is different

Using an ANOVA calculator, we find that the F-statistic is approximately 12.04 and the p-value is approximately 0.00036. Since this p-value is less than the significance level of 0.05, we reject the null hypothesis and conclude that there is evidence to suggest that at least one mean is different. Therefore, we can say that there is a correlation between inspection time and the number of components.

Task 1.5 To summarize the statistical data for non-technical colleagues, we can create a table or graph that displays the distribution of inspection times and the corresponding number of components. We can also include the mean, standard deviation, and correlation coefficient to provide a summary of the relationship between the two variables. Additionally, we can use the equation of the least squares regression line to make predictions about the number of components for different inspection times, which can help inform decision-making.

To know more about standard deviation refer to:

https://brainly.com/question/475676

#SPJ11

The quadratic least squares approximation to f(x) = eˣ on the interval [0,2] is g(x) = (e - 1)x + 1.

Let's choose x = 0, x = 1, and x = 2.

The corresponding y-values will be y = f(0) = e⁰ = 1,

y = f(1) = e¹ = e, and

y = f(2) = e².

Now, we can set up a system of equations using the chosen data points and solve for the coefficients a, b, and c:

For x = 0:

a(0)² + b(0) + c = 1

c = 1

For x = 1:

a(1)²+ b(1) + c = e

a + b + c = e

For x = 2:

a(2)² + b(2) + c = e²

4a + 2b + c = e²

Substituting c = 1 from equation 1 into equations 2 and 3, we have:

a + b + 1 = e

4a + 2b + 1 = e²

Now, we can solve this system of equations to find the values of a and b.

Subtracting equation 2 from equation 3, we get:

4a + 2b + 1 - (a + b + 1) = e² - e

3a + b = e² - e

Substituting b = e - a - 1 into equation 2, we have:

a + (e - a - 1) + 1 = e

e - a = e

a = 0

Substituting a = 0 into equation 2, we get:

b + 1 = e

b = e - 1

Therefore, the quadratic least squares approximation is given by:

g(x) = ax² + bx + c

= (0)x² + (e - 1)x + 1

= (e - 1)x + 1

To learn more on  Quadratic least squares click:

https://brainly.com/question/30546090

#SPJ4

Answer:

The value of g(-6) will be "-9".

Step-by-step explanation:

The given function is:

⇒  [tex]g(x)=x-3[/tex]

then,

⇒  [tex]g(-f)=?[/tex]

On putting the value "-6" at the place of "x", then we get

⇒  [tex]g(-6) = (-6)-3[/tex]

⇒            [tex]=-6-3[/tex]

⇒            [tex]=-9[/tex]

Thus the above is the correct solution.

Answer:

A=3^1/5

Step-by-step explanation:

3^x = 3 ^ 1/5*3^5x. Basically you need 3^x to equal A^x. A^x is equal to A^5x in this situration. So, multiply 5x to equal 1x. To make 1x you need to multiply the 5x by 1/5. So, the A value is 3, since the whole number in the 3^x has to be equal to the whole number in A^x. Knowing this, we can tell that A must be equal to 3^1/5.

Answer:

3^1/5

The general solution to the given differential equation using variation of parameters is:

[tex]y(x) = (-1/6x - 1/36 + c_5 + c_6e^{-6x})e^{3x} + (1/6x - 1/36 + c_7 + c_8e^{6x})e^{-3x}[/tex]

Question 1:

A) To solve the associated homogeneous differential equation, we consider xy" - 9xy = 0.

Dividing through by x gives us y" - 9y = 0, which is a second-order linear homogeneous differential equation with constant coefficients.

The characteristic equation is [tex]r^2 - 9 = 0[/tex].

Solving this equation, we find two roots: r = 3 and r = -3.

Therefore, the general solution to the homogeneous differential equation is [tex]y(x) = c_1e^{3x} + c_2e^{-3x}[/tex], where [tex]c_1[/tex] and [tex]c_2[/tex] are arbitrary constants.

B) To solve the given differential equation using variation of parameters, we assume the particular solution has the form [tex]y_p(x) = u_1(x)e^{3x} + u_2(x)e^{-3x}[/tex], where [tex]u_1(x)[/tex] and [tex]u_2(x)[/tex] are functions to be determined.

We find the derivatives of [tex]y_p(x)[/tex]:

[tex]y_p'(x) = u_1'(x)e^{3x} + u_2'(x)e^{-3x} + 3u_1(x)e^{3x} - 3u_2(x)e^{-3x}\\y_p''(x) = u_1''(x)e^{3x} + u_2''(x)e^{-3x} + 6u_1'(x)e^{3x} - 6u_2'(x)e^{-3x} + 9u_1(x)e^{3x} + 9u_2(x)e^{-3x}[/tex]

Substituting these expressions into the given differential equation, we have:

[tex]x(u_1''(x)e^{3x} + u_2''(x)e^{-3x} + 6u_1'(x)e^{3x} - 6u_2'(x)e^{-3x} + 9u_1(x)e^(3x) + 9u_2(x)e^{-3x}) - 9x(u_1(x)e^{3x} + u_2(x)e^{-3x}) = xe^{3x}[/tex]

Simplifying and collecting terms, we get:

[tex]x(u_1''(x)e^{3x} + u2''(x)e^{-3x}) + 6x(u_1'{x}e^{3x} - u_2'(x)e^{-3x}) = xe^{3x}[/tex]

To solve for [tex]u_1'(x)[/tex] and [tex]u_2'(x)[/tex], we equate coefficients of [tex]e^{3x}[/tex] and [tex]e^{-3x}[/tex] separately.

For the coefficient of [tex]e^{3x}[/tex]:

[tex]u_1''(x) + 6u_1'(x) = 1[/tex]

The auxiliary equation is r^2 + 6r = 0, with roots r = 0 and r = -6.

The complementary solution is [tex]u_1_c(x) = c_3 + c_4e^{-6x}[/tex], where [tex]c_3[/tex] and [tex]c_4[/tex] are arbitrary constants.

Using the method of variation of parameters, we assume [tex]u_1{x} = v_1(x)e^{-6x}[/tex], where [tex]v_1(x)[/tex] is a new unknown function.

We find [tex]u_1'(x) = v_1'(x)e^{-6x} - 6v_1(x)e^{-6x}[/tex].

Substituting these expressions back into the differential equation, we have:

[tex]v_1''(x)e^{-6x} - 12v_1'(x)e^{-6x} + 6v_1'(x)e^{-6x} - 36v_1(x)e^{-6x} = 1[/tex]

Simplifying, we get:

[tex]v1''(x)e^{-6x} - 6v1(x)e^{-6x} = 1[/tex]

To solve for v1'(x), we integrate both sides with respect to x:

∫[tex](v_1''(x)e^{-6x} - 6v_1(x)e^{-6x})dx[/tex] = ∫(1)dx

This gives us:

[tex]v_1'(x)e^{-6x} + 6v_1(x)e^{-6x} = x + c_5[/tex], where [tex]c_5[/tex] is an arbitrary constant.

Using integration by parts on the left-hand side, we have:

[tex]v_1(x)e^{-6x} = -1/6xe^{6x} - (1/36)e^{6x} + c_5e^{6x} + c_6[/tex], where [tex]c_6[/tex] is another arbitrary constant.

Therefore, the solution for the coefficient of [tex]e^{3x}[/tex] is:

[tex]u_1(x) = (-1/6x - 1/36 + c_5)e^{3x} + c_6e^{-3x}[/tex]

Similarly, for the coefficient of e^(-3x), we have:

[tex]u_2(x) = (1/6x - 1/36 + c7)e^{-3x} + c8e^{3x}[/tex], where c7 and c8 are arbitrary constants.

Finally, the particular solution to the given differential equation is:

[tex]y_p(x) = u_1(x)e^{3x} + u_2(x)e^{-3x} \\= ((-1/6x - 1/36 + c_5)e^{3x} + c_6e^{-3x})e^{3x} + ((1/6x - 1/36 + c_7)e^{-3x} + c_8e^{3x})e^{-3x} \\= (-1/6x - 1/36 + c_5 + c_6e^{-6x})e^{3x} + (1/6x - 1/36 + c_7 + c_8e^{6x})e^{-3x}[/tex]

This is the general solution to the given differential equation using variation of parameters.

To know more about general solution, refer here:

https://brainly.com/question/32062078

#SPJ4

1. Probability of exactly 7 students majoring in STEM: is 0.1312

2. Probability of exactly 2 students needing another math class: is 0.3186

3. Probability of at most 2 students needing another math class: 0.0997

4. Probability of at least 2 students needing another math class: 0.9537

5. Probability of between 2 and 3 students needing another math class: 0.9829

6. Mean for the number of people with the genetic mutation: 24

7. Standard deviation for the number of people with the genetic mutation: 4.49

1. Probability of exactly 7 students majoring in STEM:

The probability of exactly 7 students majoring in STEM can be calculated using the binomial probability formula:

P(X = k) = (nCk) × ([tex]p^k[/tex]) × ([tex](1-p)^{(n-k)[/tex])

Where:

n = Total number of trials (34)

k = Number of successful trials (7)

p = Probability of success (25% or 0.25)

Plugging in the values:

P(X = 7) = (34C7) × ([tex]0.25^7[/tex]) × ([tex](1-0.25)^{(34-7)[/tex])

Using a calculator or statistical software, calculate P(X = 7) = 0.1312 (rounded to 4 decimal places).

2. Probability of exactly 2 students needing another math class:

The probability of exactly 2 students needing another math class can be calculated using the binomial probability formula:

P(X = k) = (nCk) × ([tex]p^k[/tex]) × ([tex](1-p)^{(n-k)[/tex])

Where:

n = Total number of trials (4)

k = Number of successful trials (2)

p = Probability of success (64% or 0.64)

Plugging in the values:

P(X = 2) = (4C2) × (0.64²) × ([tex](1-0.64)^{(4-2)[/tex])

Using a calculator or statistical software, calculate P(X = 2) = 0.3186 (rounded to 4 decimal places).

3. Probability of at most 2 students needing another math class:

To calculate the probability of at most 2 students needing another math class, we sum up the probabilities of exactly 0, 1, and 2 students needing another math class:

P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2)

Using the binomial probability formula as in the previous steps, calculate P(X ≤ 2) = 0.0997 (rounded to 4 decimal places).

4. Probability of at least 2 students needing another math class:

To calculate the probability of at least 2 students needing another math class, we subtract the probability of 0 students needing another math class from 1:

P(X ≥ 2) = 1 - P(X = 0)

Using the binomial probability formula, calculate P(X ≥ 2) = 0.9537 (rounded to 4 decimal places).

5. Probability of between 2 and 3 students needing another math class:

To calculate the probability of between 2 and 3 students needing another math class (inclusive), we sum up the probabilities of exactly 2 and exactly 3 students needing another math class:

P(2 ≤ X ≤ 3) = P(X = 2) + P(X = 3)

Using the binomial probability formula, calculate P(2 ≤ X ≤ 3) = 0.9829 (rounded to 4 decimal places).

6. Mean for the number of people with the genetic mutation:

The mean for the number of people with the genetic mutation can be calculated using the formula:

Mean = n × p

Where:

n = Total number of trials (600)

p = Probability of success (4% or 0.04)

Plugging in the values, calculate the mean = 600 × 0.04 = 24 (rounded to 2 decimal places).

7. Standard deviation for the number of people with the genetic mutation:

The standard deviation for the number of people with the genetic mutation can be calculated using the formula:

Standard deviation = √(n × p × (1 - p))

Where:

n = Total number of trials (200)

p = Probability of success (8% or 0.08)

Plugging in the values, calculate the standard deviation = √(200 × 0.08 × (1 - 0.08)) = 4.49 (rounded to 1 decimal place).

So, the mean for the number of people with the genetic mutation in groups of 600 is 24, and the standard deviation for the number of people with the genetic mutation in groups of 200 is 4.49.

Learn more about probability at

https://brainly.com/question/31828911

#SPJ4

Answer:

fourth answer choice) 5

Step-by-step explanation:

2x + 9 = 4x - 1

9 = 2x - 1

10 = 2x

5 = x

x = 5

I would appreciate Brainliest, but no worries.

The value of x that would make ASUV = ATUN by HL is 4, the correct option is C.

Algebra is the study of abstract symbols, while logic is the manipulation of all those ideas.

The acronym PEMDAS stands for Parenthesis, Exponent, Multiplication, Division, Addition, and Subtraction. This approach is used to answer the problem correctly and completely.

We are given that;

SUV congruent to TUV

Now,

To solve for x in the equation 2x+9=4x+1, we need to isolate x on one side of the equation.

First, we can simplify both sides by subtracting 2x from each side:

2x+9-2x=4x+1-2x

Simplifying this gives us:

9=2x+1

Next, we can subtract 1 from each side:

9-1=2x+1-1

Simplifying this gives us:

8=2x

Finally, we can divide both sides by 2:

8/2=2x/2

Simplifying this gives us:

4=x

Therefore, by the algebra the answer will be x=4.

More about the Algebra link is given below.

brainly.com/question/953809

#SPJ7

Answer:

sheck wes, sam hunt, mainiac, petty level , lakeyah , doja cat, sawatiee

Step-by-step explanation:

Answer:

NF: Songs are kinda depressing sometimes but he is a really good rapper. Hear clouds

Kid Laroi: Listen to without you.

iann dior: rapper and really good

Mumford and sons: more of slow music but upbeat at the same time

Tracy chapman: She has really good music. Recommend listening to fast car

those are some of my favs

Step-by-step explanation:

Step-by-step explanation:

I can't read any of the things they are all in code :( I can answer the question in the comments. Also what is ne. I am so sorry!

Answer: 34.5

Step-by-step explanation:

(Base · Height) ÷ 2 → (2 · 4.5) ÷ 2 = 5.5

5.5 · 5 = 27.5

27.5 + 7 = 34.5

Answer:

3/2

I hope this is correct

Answer:

3/2 = 1.5

Step-by-step explanation:

Find two corresponding sides whose lengths are given.

AB and WX

The scale factor from quad ABCD to quad WXYZ is the ratio of a length in WXYZ to the corresponding length in ABCD.

scale factor = 12/8 = 3/2 = 1.5

Answer:

750 equals to 1081 after that divide 1081 by 750 then you will get an answer.

Answer:

the sequence is geometric sequence with common ratio (-2).

Option : D is correct.

Step-by-step explanation:

In this question table is given as

n          1          2         3           4            5

f(n)     48       -96      192      -385       768

We have to find out if the sequence is arithmetic or geometric.

For Arithmetic sequence :

Difference should be common in each term of fees.

common difference  = f(2) - f(1)

= -96 -48 = -144

similarly  = f(3) - f (2) = 192 + 96 = 288

Here,  ≠  so the sequence is not an arithmetic sequence.

For Geometric sequence :

Ratio  should be common in each term of f(n)

Common ratio  =

Therefore, the sequence is geometric sequence with common ratio (-2).

Option : D is correct.

Answer:

I think you are I'm not 100%

Answer:

13qt

Step-by-step explanation:

your totally correct.

(a) The non-identity isometry given by a reflection followed by a glide reflection can be classified as a translation. In Euclidean geometry, any reflection followed by a glide reflection is equivalent to a translation in a specific direction.

(b) The non-identity isometry that fixes two points can be classified as a rotation. In Euclidean geometry, any isometry that fixes two distinct points is a rotation about the midpoint between those two points.

(a) Let's denote the reflection as R and the glide reflection as G. If G is applied after R, we have GR. Since the isometry does not have any fixed points, GR cannot be a reflection or a translation. Therefore, the only possibility left is that GR is a glide reflection. However, in Euclidean geometry, a glide reflection is equivalent to a translation. Hence, the non-identity isometry in this case is a translation.

(b) Since the isometry fixes two points P and Q, let's denote the isometry as F. Fixing two distinct points implies that the isometry must be a rotation about the midpoint between those two points. Therefore, the non-identity isometry in this case is a rotation.

In summary, the non-identity isometry in (a) is a translation, and the non-identity isometry in (b) is a rotation.

Learn more about Euclidean geometry here: brainly.com/question/31120908

#SPJ11